| evid |
| Base Entity | request_card |
| Attribute Name | evid |
| Logical Rolename | |
| ColumnName | EVID |
| RoleName | |
| Definition | Event identifier. Each event is assigned a unique integer which identifies it in a database |
| Note | Range: evid > 0 |
| auth |
| Base Entity | request_card |
| Attribute Name | auth |
| Logical Rolename | |
| ColumnName | AUTH |
| RoleName | |
| Definition | The auth field specifies the source of the information. This may be a network identifier (FDSN or otherwise), or any other string indicating the source of the information in the record |
| Note | Range: Any free-format string up to 15 characters |
| subsource |
| Base Entity | request_card |
| Attribute Name | subsource |
| Logical Rolename | |
| ColumnName | SUBSOURCE |
| RoleName | |
| Definition | A second identifier to specify the system or process that derived the data. e.g., the origin's AUTH is CI, but the subsource (the solution) was computed by JIGGLE |
| Note | Range: Any free-format string up to 8 characters |
| net |
| Base Entity | request_card |
| Attribute Name | net |
| Logical Rolename | |
| ColumnName | NET |
| RoleName | |
| Definition | Unique network identifier. This character string is the name of a seismic network |
| Note | Range: Any free-format string up to 8 characters. If available, use the two character FDSN code for the network |
| sta |
| Base Entity | request_card |
| Attribute Name | sta |
| Logical Rolename | |
| ColumnName | STA |
| RoleName | |
| Definition | Station code. This is the common code-name of a seismic observatory. Generally only three or four characters are used |
| Note | Range: Any free-format string up to 6 characters |
| seedchan |
| Base Entity | request_card |
| Attribute Name | seedchan |
| Logical Rolename | |
| ColumnName | SEEDCHAN |
| RoleName | |
| Definition | SEED channel name. The first character denotes the band code, the second for the instrument code and the third represents the component code |
| Note | Range: seedchan = {E | S | H | B | M | L | V | U | R} U {A | B | D | F | G | H | I | K | L | M | P | R | S | V | T | W} U {Z | N | E | A | B | C | T | R | 1 | 2 | 3 | U | V | W} Band code: Sample rate (Hz) Corner period (sec) E = extremely short period ³ 80 < 10 S = short period ³ 10 to < 80 < 10 H = high broad band ³ 80 ³ 10 B = broad band ³ 10 to < 80 ³ 10 M = mid period > 1 to < 10 L = long period ~ 1 V = very long period ~ 0.1 U = ultra long period ~ 0.01 R = extremely long period ~ 0.001 Instrument code: A = tiltmeter B = creepmeter D = pressure F = magnetometer G = gravimeter/accelerometer H = high gain seismometer I = humidity K = temperature L = low gain seismometer M = mass position seismometer P = geophone R = rainfall S = linear strainmeter V = volumetric strain T = tide meter W = wind Component code: N = north-south E = east-west T = transverse R = radial Z = vertical A, B, C = triaxial 1, 2, 3 = orthogonal components but non-traditional orientations U, V, W = optional components |
| staauth |
| Base Entity | request_card |
| Attribute Name | staauth |
| Logical Rolename | |
| ColumnName | STAAUTH |
| RoleName | |
| Definition | Purpose unknown (always same as subsource) |
| Note | Range: Any free-format string up to 15 characters long |
| channel |
| Base Entity | request_card |
| Attribute Name | channel |
| Logical Rolename | |
| ColumnName | CHANNEL |
| RoleName | |
| Definition | Channel name |
| Note | Range: Any valid channel name, which may be network-specific. Networks using SEED channel names should use the same value for channel and seedchan |
| datetime_on |
| Base Entity | request_card |
| Attribute Name | datetime_on |
| Logical Rolename | |
| ColumnName | DATETIME_ON |
| RoleName | |
| Definition | Start time of time window to save |
| Note | Range: Any valid float. datetime = 0.0 on January 01, 1970 at 00:00:00.0000 Units: Seconds |
| datetime_off |
| Base Entity | request_card |
| Attribute Name | datetime_off |
| Logical Rolename | |
| ColumnName | DATETIME_OFF |
| RoleName | |
| Definition | End time of time window to save |
| Note | Range: Any valid float. datetime = 0.0 on January 01, 1970 at 00:00:00.0000 Units: Seconds |
| request_type |
| Base Entity | request_card |
| Attribute Name | request_type |
| Logical Rolename | |
| ColumnName | REQUEST_TYPE |
| RoleName | |
| Definition | Single character flag describing request type |
| Note | Range: request_type = {T | C} T = trigger, C = continuous |
| lddate |
| Base Entity | request_card |
| Attribute Name | lddate |
| Logical Rolename | |
| ColumnName | LDDATE |
| RoleName | |
| Definition | Load date. Date and time that the record was created or last modified, in Oracle date datatype |
| Note | Range: Any valid date between January 01, 4712 BC and January 01, 4712 AD Units: YYYY/MM/DD HH24:MI:SS |
| rcid |
| Base Entity | request_card |
| Attribute Name | rcid |
| Logical Rolename | |
| ColumnName | RCID |
| RoleName | |
| Definition | Unique request row number. Derived from REQSEQ. |
| Note | Range: rcid > 0 |
| location |
| Base Entity | request_card |
| Attribute Name | location |
| Logical Rolename | |
| ColumnName | LOCATION |
| RoleName | |
| Definition | Describes the individual sites on an array station, operated by the same network operator |
| Note | Range: Any free-format string up to 2 characters long |
| retry |
| Base Entity | request_card |
| Attribute Name | retry |
| Logical Rolename | |
| ColumnName | RETRY |
| RoleName | |
| Definition | Count of attempts to retrieve this waveform |
| Note | Range: retry > 0 |
| lastretry |
| Base Entity | request_card |
| Attribute Name | lastretry |
| Logical Rolename | |
| ColumnName | LASTRETRY |
| RoleName | |
| Definition | Time of last attempt to retrieve this waveform |
| Note | Range: Any valid date between January 01, 4712 BC and January 01, 4712 AD Units: YYYY/MM/DD HH24:MI:SS |
| priority |
| Base Entity | request_card |
| Attribute Name | priority |
| Logical Rolename | |
| ColumnName | PRIORITY |
| RoleName | |
| Definition | Rows are processed in priority order, 1 is highest priority |
| Note | Range: priority > 0 |