Oct  5 00:00:13 (none) syslogd 1.4.1: restart.
Oct  5 00:00:14 (none) syslog: Starting kernel logger... 
Oct  5 00:00:14 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 00:00:14 (none) kernel: Cannot find map file.
Oct  5 00:00:14 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 00:00:14 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 00:00:14 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 00:00:14 (none) kernel: On node 0 totalpages: 32768
Oct  5 00:00:14 (none) kernel: zone(0): 32768 pages.
Oct  5 00:00:14 (none) kernel: zone(1): 0 pages.
Oct  5 00:00:14 (none) kernel: zone(2): 0 pages.
Oct  5 00:00:14 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 00:00:14 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 00:00:14 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 00:00:14 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 00:00:14 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 00:00:14 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 00:00:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 00:00:14 (none) hostname: setting hostname to taurus_1908
Oct  5 00:00:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 00:00:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 00:00:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 00:00:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 00:00:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 00:00:14 (none) kernel: Initializing RT netlink socket
Oct  5 00:00:14 (none) kernel: Starting kswapd
Oct  5 00:00:14 (none) kernel: Journalled Block Device driver loaded
Oct  5 00:00:14 (none) serial1: start
Oct  5 00:00:14 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 00:00:15 (none) kernel: Probing for Epson LCD controller
Oct  5 00:00:15 (none) kernel: Epson S1D13A05 detected
Oct  5 00:00:15 (none) serial1: Setting serial port to raw mode
Oct  5 00:00:15 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 00:00:15 (none) serial1: port /dev/ttyS1
Oct  5 00:00:15 (none) kernel: Console: switching to frame buffer device
Oct  5 00:00:15 (none) serial1: speed 9600
Oct  5 00:00:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 00:00:15 (none) kernel: CPM UART driver version 0.04
Oct  5 00:00:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 00:00:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 00:00:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 00:00:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 00:00:15 (none) serial2: start
Oct  5 00:00:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 00:00:16 (none) kernel: Taurus input driver version 0.1
Oct  5 00:00:16 (none) serial2: Setting serial port to raw mode
Oct  5 00:00:16 (none) kernel: S1D13A05 IO
Oct  5 00:00:16 (none) serial2: port /dev/ttyS2
Oct  5 00:00:16 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 00:00:16 (none) serial2: speed 9600
Oct  5 00:00:16 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 00:00:16 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 00:00:16 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 00:00:16 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 00:00:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 00:00:16 (none) network_common: start
Oct  5 00:00:16 (none) kernel: SLIP linefill/keepalive option.
Oct  5 00:00:16 (none) kernel: loop: loaded (max 8 devices)
Oct  5 00:00:16 (none) kernel: PPP generic driver version 2.4.2
Oct  5 00:00:17 (none) network_common: using static configuration for interface eth0...
Oct  5 00:00:17 (none) kernel: PPP Deflate Compression module registered
Oct  5 00:00:17 (none) kernel: PPP BSD Compression module registered
Oct  5 00:00:17 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 00:00:17 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 00:00:17 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 00:00:17 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 00:00:17 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 00:00:17 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 00:00:17 (none) kernel:  Fixed Disk Card
Oct  5 00:00:17 (none) kernel:  IDE interface 
Oct  5 00:00:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 00:00:18 (none) kernel: Probing IDE interface ide0...
Oct  5 00:00:18 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 00:00:18 (none) kernel: Probing IDE interface ide1...
Oct  5 00:00:18 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 00:00:18 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 00:00:18 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 00:00:18 (none) kernel: hda: attached ide-disk driver.
Oct  5 00:00:18 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 00:00:18 (none) kernel: 
Oct  5 00:00:18 (none) kernel: hda: drive not ready for command
Oct  5 00:00:18 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 00:00:18 (none) kernel: hdc: attached ide-disk driver.
Oct  5 00:00:18 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 00:00:18 (none) kernel: Partition check:
Oct  5 00:00:18 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 00:00:18 (none) kernel: 
Oct  5 00:00:18 (none) kernel: hda: drive not ready for command
Oct  5 00:00:18 (none) kernel: hda: lost interrupt
Oct  5 00:00:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 00:00:19 (none) kernel: hda: lost interrupt
Oct  5 00:00:19 (none) xinetd[160]: Started working: 3 available services
Oct  5 00:00:19 (none) kernel: hda: lost interrupt
Oct  5 00:00:19 (none) last message repeated 4 times
Oct  5 00:00:19 (none) kernel:  hda1
Oct  5 00:00:19 (none) kernel:  hdc: hdc1
Oct  5 00:00:19 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 00:00:19 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 00:00:19 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 00:00:19 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 00:00:19 (none) kernel: Using buffer write method
Oct  5 00:00:19 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 00:00:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 00:00:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 00:00:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 00:00:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 00:00:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 00:00:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 00:00:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 00:00:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 00:00:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 00:00:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 00:00:19 (none) kernel: Taurus ether LED driver V1.10
Oct  5 00:00:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 00:00:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 00:00:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 00:00:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 00:00:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 00:00:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 00:00:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 00:00:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 00:00:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 00:00:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 00:00:19 (none) kernel: 
Oct  5 00:00:19 (none) kernel: hda: drive not ready for command
Oct  5 00:00:19 (none) kernel: hda: lost interrupt
Oct  5 00:00:20 (none) last message repeated 6 times
Oct  5 00:00:20 (none) kernel:  hda1
Oct  5 00:00:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 00:00:20 (none) kernel: 
Oct  5 00:00:20 (none) kernel: hda: drive not ready for command
Oct  5 00:00:20 (none) kernel: hda: lost interrupt
Oct  5 00:00:20 (none) last message repeated 6 times
Oct  5 00:00:20 (none) kernel:  hda1
Oct  5 00:00:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 00:00:20 (none) kernel: 
Oct  5 00:00:20 (none) kernel: hda: drive not ready for command
Oct  5 00:00:20 (none) kernel: hda: lost interrupt
Oct  5 00:00:20 (none) kernel:  hdc: hdc1
Oct  5 00:00:20 (none) last message repeated 2 times
Oct  5 00:00:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 00:00:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 00:00:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 00:00:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 00:00:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 00:00:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 00:00:21 (none) tdma: TDMA over serial setup
Oct  5 00:00:22 (none) apollo: Starting Apollo
Oct  5 00:00:22 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 00:00:22 (none) sntp-server: Starting SNTP server process 
Oct  5 00:00:24 (none) log_manager: System log manager running 
Oct  5 00:00:29 (none) nmxbus-mtu: using large MTU
Oct  5 00:00:29 (none) nmxbus-mtu: Done
Oct  5 00:00:31 (none) sntp-client: Starting SNTP client process 
Oct  5 00:00:31 (none) ntpd[339]: ntp engine ready
Oct  5 00:00:55 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 00:04:57 (none) apollo: Apollo stopped. (rc=0)
Oct  5 00:05:01 (none) exiting on signal 15
Oct  5 02:50:13 (none) syslogd 1.4.1: restart.
Oct  5 02:50:13 (none) syslog: Starting kernel logger... 
Oct  5 02:50:13 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 02:50:13 (none) kernel: Cannot find map file.
Oct  5 02:50:13 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 02:50:13 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 02:50:13 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 02:50:13 (none) kernel: On node 0 totalpages: 32768
Oct  5 02:50:13 (none) kernel: zone(0): 32768 pages.
Oct  5 02:50:13 (none) kernel: zone(1): 0 pages.
Oct  5 02:50:13 (none) kernel: zone(2): 0 pages.
Oct  5 02:50:13 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 02:50:13 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 02:50:13 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 02:50:13 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 02:50:13 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 02:50:13 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 02:50:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 02:50:13 (none) hostname: setting hostname to taurus_1908
Oct  5 02:50:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 02:50:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 02:50:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 02:50:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 02:50:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 02:50:14 (none) kernel: Initializing RT netlink socket
Oct  5 02:50:14 (none) kernel: Starting kswapd
Oct  5 02:50:14 (none) kernel: Journalled Block Device driver loaded
Oct  5 02:50:14 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 02:50:14 (none) kernel: Probing for Epson LCD controller
Oct  5 02:50:14 (none) serial1: start
Oct  5 02:50:14 (none) kernel: Epson S1D13A05 detected
Oct  5 02:50:14 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 02:50:14 (none) kernel: Console: switching to frame buffer device
Oct  5 02:50:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 02:50:15 (none) serial1: Setting serial port to raw mode
Oct  5 02:50:15 (none) kernel: CPM UART driver version 0.04
Oct  5 02:50:15 (none) serial1: port /dev/ttyS1
Oct  5 02:50:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 02:50:15 (none) serial1: speed 9600
Oct  5 02:50:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 02:50:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 02:50:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 02:50:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 02:50:15 (none) kernel: Taurus input driver version 0.1
Oct  5 02:50:15 (none) kernel: S1D13A05 IO
Oct  5 02:50:15 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 02:50:15 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 02:50:15 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 02:50:15 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 02:50:15 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 02:50:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 02:50:16 (none) kernel: SLIP linefill/keepalive option.
Oct  5 02:50:16 (none) kernel: loop: loaded (max 8 devices)
Oct  5 02:50:16 (none) serial2: start
Oct  5 02:50:16 (none) kernel: PPP generic driver version 2.4.2
Oct  5 02:50:16 (none) kernel: PPP Deflate Compression module registered
Oct  5 02:50:16 (none) kernel: PPP BSD Compression module registered
Oct  5 02:50:16 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 02:50:16 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 02:50:16 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 02:50:16 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 02:50:16 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 02:50:16 (none) kernel:  Fixed Disk Card
Oct  5 02:50:16 (none) serial2: Setting serial port to raw mode
Oct  5 02:50:16 (none) kernel:  IDE interface 
Oct  5 02:50:16 (none) serial2: port /dev/ttyS2
Oct  5 02:50:16 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 02:50:16 (none) serial2: speed 9600
Oct  5 02:50:16 (none) kernel: Probing IDE interface ide0...
Oct  5 02:50:16 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 02:50:17 (none) kernel: Probing IDE interface ide1...
Oct  5 02:50:17 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 02:50:17 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 02:50:17 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 02:50:17 (none) kernel: hda: attached ide-disk driver.
Oct  5 02:50:17 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 02:50:17 (none) kernel: 
Oct  5 02:50:17 (none) kernel: hda: drive not ready for command
Oct  5 02:50:17 (none) network_common: start
Oct  5 02:50:17 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 02:50:17 (none) kernel: hdc: attached ide-disk driver.
Oct  5 02:50:17 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 02:50:17 (none) kernel: Partition check:
Oct  5 02:50:17 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 02:50:17 (none) kernel: 
Oct  5 02:50:17 (none) network_common: using static configuration for interface eth0...
Oct  5 02:50:17 (none) kernel: hda: drive not ready for command
Oct  5 02:50:17 (none) kernel: hda: lost interrupt
Oct  5 02:50:18 (none) last message repeated 4 times
Oct  5 02:50:18 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 02:50:18 (none) kernel: hda: lost interrupt
Oct  5 02:50:18 (none) kernel: hda: lost interrupt
Oct  5 02:50:18 (none) kernel:  hda1
Oct  5 02:50:18 (none) kernel:  hdc: hdc1
Oct  5 02:50:18 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 02:50:18 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 02:50:18 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 02:50:18 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 02:50:18 (none) kernel: Using buffer write method
Oct  5 02:50:18 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 02:50:18 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 02:50:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 02:50:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 02:50:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 02:50:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 02:50:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 02:50:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 02:50:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 02:50:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 02:50:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 02:50:19 (none) kernel: Taurus ether LED driver V1.10
Oct  5 02:50:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 02:50:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 02:50:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 02:50:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 02:50:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 02:50:19 (none) xinetd[160]: Started working: 3 available services
Oct  5 02:50:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 02:50:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 02:50:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 02:50:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 02:50:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 02:50:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 02:50:19 (none) kernel: 
Oct  5 02:50:19 (none) kernel: hda: drive not ready for command
Oct  5 02:50:19 (none) kernel: hda: lost interrupt
Oct  5 02:50:19 (none) last message repeated 6 times
Oct  5 02:50:20 (none) kernel:  hda1
Oct  5 02:50:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 02:50:20 (none) kernel: 
Oct  5 02:50:20 (none) kernel: hda: drive not ready for command
Oct  5 02:50:20 (none) kernel: hda: lost interrupt
Oct  5 02:50:20 (none) last message repeated 6 times
Oct  5 02:50:20 (none) kernel:  hda1
Oct  5 02:50:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 02:50:20 (none) kernel: 
Oct  5 02:50:20 (none) kernel: hda: drive not ready for command
Oct  5 02:50:20 (none) kernel: hda: lost interrupt
Oct  5 02:50:20 (none) kernel:  hdc: hdc1
Oct  5 02:50:20 (none) last message repeated 2 times
Oct  5 02:50:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 02:50:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 02:50:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 02:50:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 02:50:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 02:50:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 02:50:22 (none) tdma: TDMA over serial setup
Oct  5 02:50:22 (none) apollo: Starting Apollo
Oct  5 02:50:23 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 02:50:23 (none) sntp-server: Starting SNTP server process 
Oct  5 02:50:25 (none) log_manager: System log manager running 
Oct  5 02:50:30 (none) nmxbus-mtu: using large MTU
Oct  5 02:50:30 (none) nmxbus-mtu: Done
Oct  5 02:50:31 (none) sntp-client: Starting SNTP client process 
Oct  5 02:50:31 (none) ntpd[339]: ntp engine ready
Oct  5 02:50:54 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 02:54:52 (none) apollo: Apollo stopped. (rc=0)
Oct  5 02:54:55 (none) exiting on signal 15
Oct  5 05:34:13 (none) syslogd 1.4.1: restart.
Oct  5 05:34:13 (none) syslog: Starting kernel logger... 
Oct  5 05:34:13 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 05:34:13 (none) kernel: Cannot find map file.
Oct  5 05:34:13 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 05:34:13 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 05:34:13 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 05:34:13 (none) kernel: On node 0 totalpages: 32768
Oct  5 05:34:13 (none) kernel: zone(0): 32768 pages.
Oct  5 05:34:13 (none) kernel: zone(1): 0 pages.
Oct  5 05:34:13 (none) kernel: zone(2): 0 pages.
Oct  5 05:34:13 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 05:34:13 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 05:34:13 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 05:34:13 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 05:34:13 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 05:34:14 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 05:34:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 05:34:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 05:34:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 05:34:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 05:34:14 (none) hostname: setting hostname to taurus_1908
Oct  5 05:34:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 05:34:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 05:34:14 (none) kernel: Initializing RT netlink socket
Oct  5 05:34:14 (none) kernel: Starting kswapd
Oct  5 05:34:14 (none) kernel: Journalled Block Device driver loaded
Oct  5 05:34:14 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 05:34:14 (none) kernel: Probing for Epson LCD controller
Oct  5 05:34:14 (none) kernel: Epson S1D13A05 detected
Oct  5 05:34:14 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 05:34:14 (none) serial1: start
Oct  5 05:34:14 (none) kernel: Console: switching to frame buffer device
Oct  5 05:34:14 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 05:34:14 (none) kernel: CPM UART driver version 0.04
Oct  5 05:34:15 (none) serial1: Setting serial port to raw mode
Oct  5 05:34:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 05:34:15 (none) serial1: port /dev/ttyS1
Oct  5 05:34:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 05:34:15 (none) serial1: speed 9600
Oct  5 05:34:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 05:34:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 05:34:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 05:34:15 (none) kernel: Taurus input driver version 0.1
Oct  5 05:34:15 (none) kernel: S1D13A05 IO
Oct  5 05:34:15 (none) serial2: start
Oct  5 05:34:15 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 05:34:15 (none) serial2: Setting serial port to raw mode
Oct  5 05:34:16 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 05:34:16 (none) serial2: port /dev/ttyS2
Oct  5 05:34:16 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 05:34:16 (none) serial2: speed 9600
Oct  5 05:34:16 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 05:34:16 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 05:34:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 05:34:16 (none) kernel: SLIP linefill/keepalive option.
Oct  5 05:34:16 (none) kernel: loop: loaded (max 8 devices)
Oct  5 05:34:16 (none) kernel: PPP generic driver version 2.4.2
Oct  5 05:34:16 (none) network_common: start
Oct  5 05:34:16 (none) kernel: PPP Deflate Compression module registered
Oct  5 05:34:16 (none) kernel: PPP BSD Compression module registered
Oct  5 05:34:16 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 05:34:16 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 05:34:17 (none) network_common: using static configuration for interface eth0...
Oct  5 05:34:17 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 05:34:17 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 05:34:17 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 05:34:17 (none) kernel:  Fixed Disk Card
Oct  5 05:34:17 (none) kernel:  IDE interface 
Oct  5 05:34:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 05:34:17 (none) kernel: Probing IDE interface ide0...
Oct  5 05:34:17 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 05:34:17 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 05:34:17 (none) kernel: Probing IDE interface ide1...
Oct  5 05:34:17 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 05:34:17 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 05:34:18 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 05:34:18 (none) kernel: hda: attached ide-disk driver.
Oct  5 05:34:18 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 05:34:18 (none) kernel: 
Oct  5 05:34:18 (none) kernel: hda: drive not ready for command
Oct  5 05:34:18 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 05:34:18 (none) kernel: hdc: attached ide-disk driver.
Oct  5 05:34:18 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 05:34:18 (none) kernel: Partition check:
Oct  5 05:34:18 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 05:34:18 (none) kernel: 
Oct  5 05:34:18 (none) kernel: hda: drive not ready for command
Oct  5 05:34:18 (none) kernel: hda: lost interrupt
Oct  5 05:34:19 (none) last message repeated 6 times
Oct  5 05:34:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 05:34:19 (none) kernel:  hda1
Oct  5 05:34:19 (none) kernel:  hdc: hdc1
Oct  5 05:34:19 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 05:34:19 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 05:34:19 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 05:34:19 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 05:34:19 (none) kernel: Using buffer write method
Oct  5 05:34:19 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 05:34:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 05:34:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 05:34:19 (none) xinetd[160]: Started working: 3 available services
Oct  5 05:34:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 05:34:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 05:34:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 05:34:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 05:34:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 05:34:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 05:34:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 05:34:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 05:34:19 (none) kernel: Taurus ether LED driver V1.10
Oct  5 05:34:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 05:34:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 05:34:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 05:34:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 05:34:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 05:34:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 05:34:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 05:34:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 05:34:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 05:34:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 05:34:19 (none) kernel: 
Oct  5 05:34:19 (none) kernel: hda: drive not ready for command
Oct  5 05:34:19 (none) kernel: hda: lost interrupt
Oct  5 05:34:20 (none) last message repeated 6 times
Oct  5 05:34:20 (none) kernel:  hda1
Oct  5 05:34:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 05:34:20 (none) kernel: 
Oct  5 05:34:20 (none) kernel: hda: drive not ready for command
Oct  5 05:34:20 (none) kernel: hda: lost interrupt
Oct  5 05:34:20 (none) last message repeated 6 times
Oct  5 05:34:20 (none) kernel:  hda1
Oct  5 05:34:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 05:34:20 (none) kernel: 
Oct  5 05:34:20 (none) kernel: hda: drive not ready for command
Oct  5 05:34:20 (none) kernel: hda: lost interrupt
Oct  5 05:34:20 (none) kernel:  hdc: hdc1
Oct  5 05:34:20 (none) last message repeated 2 times
Oct  5 05:34:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 05:34:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 05:34:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 05:34:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 05:34:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 05:34:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 05:34:22 (none) tdma: TDMA over serial setup
Oct  5 05:34:22 (none) apollo: Starting Apollo
Oct  5 05:34:22 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 05:34:22 (none) sntp-server: Starting SNTP server process 
Oct  5 05:34:24 (none) log_manager: System log manager running 
Oct  5 05:34:29 (none) nmxbus-mtu: using large MTU
Oct  5 05:34:29 (none) nmxbus-mtu: Done
Oct  5 05:34:30 (none) sntp-client: Starting SNTP client process 
Oct  5 05:34:31 (none) ntpd[339]: ntp engine ready
Oct  5 05:34:51 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 05:38:54 (none) apollo: Apollo stopped. (rc=0)
Oct  5 05:38:59 (none) exiting on signal 15
Oct  5 08:23:13 (none) syslogd 1.4.1: restart.
Oct  5 08:23:13 (none) syslog: Starting kernel logger... 
Oct  5 08:23:13 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 08:23:13 (none) kernel: Cannot find map file.
Oct  5 08:23:13 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 08:23:13 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 08:23:13 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 08:23:13 (none) kernel: On node 0 totalpages: 32768
Oct  5 08:23:13 (none) kernel: zone(0): 32768 pages.
Oct  5 08:23:13 (none) kernel: zone(1): 0 pages.
Oct  5 08:23:13 (none) kernel: zone(2): 0 pages.
Oct  5 08:23:13 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 08:23:13 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 08:23:13 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 08:23:13 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 08:23:13 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 08:23:13 (none) hostname: setting hostname to taurus_1908
Oct  5 08:23:13 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 08:23:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 08:23:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 08:23:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 08:23:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 08:23:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 08:23:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 08:23:14 (none) serial1: start
Oct  5 08:23:14 (none) kernel: Initializing RT netlink socket
Oct  5 08:23:14 (none) kernel: Starting kswapd
Oct  5 08:23:14 (none) kernel: Journalled Block Device driver loaded
Oct  5 08:23:14 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 08:23:14 (none) kernel: Probing for Epson LCD controller
Oct  5 08:23:14 (none) serial1: Setting serial port to raw mode
Oct  5 08:23:14 (none) kernel: Epson S1D13A05 detected
Oct  5 08:23:14 (none) serial1: port /dev/ttyS1
Oct  5 08:23:14 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 08:23:14 (none) serial1: speed 9600
Oct  5 08:23:15 (none) kernel: Console: switching to frame buffer device
Oct  5 08:23:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 08:23:15 (none) kernel: CPM UART driver version 0.04
Oct  5 08:23:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 08:23:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 08:23:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 08:23:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 08:23:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 08:23:15 (none) kernel: Taurus input driver version 0.1
Oct  5 08:23:15 (none) kernel: S1D13A05 IO
Oct  5 08:23:15 (none) serial2: start
Oct  5 08:23:15 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 08:23:15 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 08:23:15 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 08:23:15 (none) serial2: Setting serial port to raw mode
Oct  5 08:23:15 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 08:23:15 (none) serial2: port /dev/ttyS2
Oct  5 08:23:15 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 08:23:16 (none) serial2: speed 9600
Oct  5 08:23:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 08:23:16 (none) kernel: SLIP linefill/keepalive option.
Oct  5 08:23:16 (none) kernel: loop: loaded (max 8 devices)
Oct  5 08:23:16 (none) kernel: PPP generic driver version 2.4.2
Oct  5 08:23:16 (none) kernel: PPP Deflate Compression module registered
Oct  5 08:23:16 (none) network_common: start
Oct  5 08:23:16 (none) kernel: PPP BSD Compression module registered
Oct  5 08:23:16 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 08:23:16 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 08:23:16 (none) network_common: using static configuration for interface eth0...
Oct  5 08:23:16 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 08:23:16 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 08:23:16 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 08:23:16 (none) kernel:  Fixed Disk Card
Oct  5 08:23:17 (none) kernel:  IDE interface 
Oct  5 08:23:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 08:23:17 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 08:23:17 (none) kernel: Probing IDE interface ide0...
Oct  5 08:23:17 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 08:23:17 (none) kernel: Probing IDE interface ide1...
Oct  5 08:23:17 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 08:23:17 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 08:23:17 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 08:23:18 (none) kernel: hda: attached ide-disk driver.
Oct  5 08:23:18 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 08:23:18 (none) kernel: 
Oct  5 08:23:18 (none) kernel: hda: drive not ready for command
Oct  5 08:23:18 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 08:23:18 (none) kernel: hdc: attached ide-disk driver.
Oct  5 08:23:18 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 08:23:18 (none) kernel: Partition check:
Oct  5 08:23:18 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 08:23:18 (none) kernel: 
Oct  5 08:23:18 (none) kernel: hda: drive not ready for command
Oct  5 08:23:18 (none) kernel: hda: lost interrupt
Oct  5 08:23:18 (none) last message repeated 2 times
Oct  5 08:23:18 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 08:23:18 (none) kernel: hda: lost interrupt
Oct  5 08:23:18 (none) xinetd[160]: Started working: 3 available services
Oct  5 08:23:18 (none) kernel: hda: lost interrupt
Oct  5 08:23:18 (none) last message repeated 2 times
Oct  5 08:23:18 (none) kernel:  hda1
Oct  5 08:23:18 (none) kernel:  hdc: hdc1
Oct  5 08:23:18 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 08:23:18 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 08:23:18 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 08:23:18 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 08:23:18 (none) kernel: Using buffer write method
Oct  5 08:23:18 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 08:23:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 08:23:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 08:23:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 08:23:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 08:23:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 08:23:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 08:23:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 08:23:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 08:23:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 08:23:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 08:23:19 (none) kernel: Taurus ether LED driver V1.10
Oct  5 08:23:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 08:23:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 08:23:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 08:23:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 08:23:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 08:23:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 08:23:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 08:23:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 08:23:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 08:23:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 08:23:19 (none) kernel: 
Oct  5 08:23:19 (none) kernel: hda: drive not ready for command
Oct  5 08:23:19 (none) kernel: hda: lost interrupt
Oct  5 08:23:19 (none) last message repeated 6 times
Oct  5 08:23:19 (none) kernel:  hda1
Oct  5 08:23:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 08:23:19 (none) kernel: 
Oct  5 08:23:19 (none) kernel: hda: drive not ready for command
Oct  5 08:23:19 (none) kernel: hda: lost interrupt
Oct  5 08:23:20 (none) last message repeated 6 times
Oct  5 08:23:20 (none) kernel:  hda1
Oct  5 08:23:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 08:23:20 (none) kernel: 
Oct  5 08:23:20 (none) kernel: hda: drive not ready for command
Oct  5 08:23:20 (none) kernel: hda: lost interrupt
Oct  5 08:23:20 (none) kernel:  hdc: hdc1
Oct  5 08:23:20 (none) last message repeated 2 times
Oct  5 08:23:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 08:23:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 08:23:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 08:23:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 08:23:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 08:23:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 08:23:21 (none) tdma: TDMA over serial setup
Oct  5 08:23:22 (none) apollo: Starting Apollo
Oct  5 08:23:22 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 08:23:22 (none) sntp-server: Starting SNTP server process 
Oct  5 08:23:24 (none) log_manager: System log manager running 
Oct  5 08:23:29 (none) nmxbus-mtu: using large MTU
Oct  5 08:23:29 (none) nmxbus-mtu: Done
Oct  5 08:23:31 (none) sntp-client: Starting SNTP client process 
Oct  5 08:23:31 (none) ntpd[339]: ntp engine ready
Oct  5 08:23:59 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 08:27:54 (none) apollo: Apollo stopped. (rc=0)
Oct  5 08:27:58 (none) exiting on signal 15
Oct  5 11:12:43 (none) syslogd 1.4.1: restart.
Oct  5 11:12:43 (none) syslog: Starting kernel logger... 
Oct  5 11:12:43 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 11:12:43 (none) kernel: Cannot find map file.
Oct  5 11:12:43 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 11:12:43 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 11:12:43 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 11:12:43 (none) kernel: On node 0 totalpages: 32768
Oct  5 11:12:43 (none) kernel: zone(0): 32768 pages.
Oct  5 11:12:43 (none) kernel: zone(1): 0 pages.
Oct  5 11:12:43 (none) kernel: zone(2): 0 pages.
Oct  5 11:12:43 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 11:12:43 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 11:12:43 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 11:12:43 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 11:12:43 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 11:12:44 (none) hostname: setting hostname to taurus_1908
Oct  5 11:12:44 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 11:12:44 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 11:12:44 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 11:12:44 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 11:12:44 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 11:12:44 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 11:12:44 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 11:12:44 (none) kernel: Initializing RT netlink socket
Oct  5 11:12:44 (none) kernel: Starting kswapd
Oct  5 11:12:44 (none) kernel: Journalled Block Device driver loaded
Oct  5 11:12:44 (none) serial1: start
Oct  5 11:12:44 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 11:12:44 (none) kernel: Probing for Epson LCD controller
Oct  5 11:12:45 (none) kernel: Epson S1D13A05 detected
Oct  5 11:12:45 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 11:12:45 (none) serial1: Setting serial port to raw mode
Oct  5 11:12:45 (none) kernel: Console: switching to frame buffer device
Oct  5 11:12:45 (none) serial1: port /dev/ttyS1
Oct  5 11:12:45 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 11:12:45 (none) serial1: speed 9600
Oct  5 11:12:45 (none) kernel: CPM UART driver version 0.04
Oct  5 11:12:45 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 11:12:45 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 11:12:45 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 11:12:45 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 11:12:45 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 11:12:45 (none) serial2: start
Oct  5 11:12:45 (none) kernel: Taurus input driver version 0.1
Oct  5 11:12:46 (none) kernel: S1D13A05 IO
Oct  5 11:12:46 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 11:12:46 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 11:12:46 (none) serial2: Setting serial port to raw mode
Oct  5 11:12:46 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 11:12:46 (none) serial2: port /dev/ttyS2
Oct  5 11:12:46 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 11:12:46 (none) serial2: speed 9600
Oct  5 11:12:46 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 11:12:46 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 11:12:46 (none) kernel: SLIP linefill/keepalive option.
Oct  5 11:12:46 (none) kernel: loop: loaded (max 8 devices)
Oct  5 11:12:46 (none) kernel: PPP generic driver version 2.4.2
Oct  5 11:12:46 (none) network_common: start
Oct  5 11:12:46 (none) kernel: PPP Deflate Compression module registered
Oct  5 11:12:46 (none) kernel: PPP BSD Compression module registered
Oct  5 11:12:46 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 11:12:47 (none) network_common: using static configuration for interface eth0...
Oct  5 11:12:47 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 11:12:47 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 11:12:47 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 11:12:47 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 11:12:47 (none) kernel:  Fixed Disk Card
Oct  5 11:12:47 (none) kernel:  IDE interface 
Oct  5 11:12:47 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 11:12:47 (none) kernel: Probing IDE interface ide0...
Oct  5 11:12:47 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 11:12:47 (none) kernel: Probing IDE interface ide1...
Oct  5 11:12:47 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 11:12:47 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 11:12:48 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 11:12:48 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 11:12:48 (none) kernel: hda: attached ide-disk driver.
Oct  5 11:12:48 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 11:12:48 (none) kernel: 
Oct  5 11:12:48 (none) kernel: hda: drive not ready for command
Oct  5 11:12:48 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 11:12:48 (none) kernel: hdc: attached ide-disk driver.
Oct  5 11:12:48 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 11:12:48 (none) kernel: Partition check:
Oct  5 11:12:48 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 11:12:48 (none) kernel: 
Oct  5 11:12:48 (none) kernel: hda: drive not ready for command
Oct  5 11:12:48 (none) kernel: hda: lost interrupt
Oct  5 11:12:49 (none) last message repeated 3 times
Oct  5 11:12:49 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 11:12:49 (none) kernel: hda: lost interrupt
Oct  5 11:12:49 (none) xinetd[160]: Started working: 3 available services
Oct  5 11:12:49 (none) kernel: hda: lost interrupt
Oct  5 11:12:49 (none) kernel: hda: lost interrupt
Oct  5 11:12:49 (none) kernel:  hda1
Oct  5 11:12:49 (none) kernel:  hdc: hdc1
Oct  5 11:12:49 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 11:12:49 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 11:12:49 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 11:12:49 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 11:12:49 (none) kernel: Using buffer write method
Oct  5 11:12:49 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 11:12:49 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 11:12:49 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 11:12:49 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 11:12:49 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 11:12:49 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 11:12:49 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 11:12:49 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 11:12:49 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 11:12:49 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 11:12:49 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 11:12:49 (none) kernel: Taurus ether LED driver V1.10
Oct  5 11:12:49 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 11:12:49 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 11:12:49 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 11:12:49 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 11:12:49 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 11:12:49 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 11:12:49 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 11:12:49 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 11:12:49 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 11:12:49 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 11:12:49 (none) kernel: 
Oct  5 11:12:49 (none) kernel: hda: drive not ready for command
Oct  5 11:12:49 (none) kernel: hda: lost interrupt
Oct  5 11:12:50 (none) last message repeated 6 times
Oct  5 11:12:50 (none) kernel:  hda1
Oct  5 11:12:50 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 11:12:50 (none) kernel: 
Oct  5 11:12:50 (none) kernel: hda: drive not ready for command
Oct  5 11:12:50 (none) kernel: hda: lost interrupt
Oct  5 11:12:50 (none) last message repeated 6 times
Oct  5 11:12:50 (none) kernel:  hda1
Oct  5 11:12:50 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 11:12:50 (none) kernel: 
Oct  5 11:12:50 (none) kernel: hda: drive not ready for command
Oct  5 11:12:50 (none) kernel: hda: lost interrupt
Oct  5 11:12:50 (none) kernel:  hdc: hdc1
Oct  5 11:12:50 (none) last message repeated 2 times
Oct  5 11:12:50 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 11:12:50 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 11:12:50 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 11:12:50 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 11:12:50 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 11:12:50 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 11:12:51 (none) tdma: TDMA over serial setup
Oct  5 11:12:52 (none) apollo: Starting Apollo
Oct  5 11:12:52 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 11:12:52 (none) sntp-server: Starting SNTP server process 
Oct  5 11:12:54 (none) log_manager: System log manager running 
Oct  5 11:12:59 (none) nmxbus-mtu: using large MTU
Oct  5 11:12:59 (none) nmxbus-mtu: Done
Oct  5 11:13:01 (none) sntp-client: Starting SNTP client process 
Oct  5 11:13:01 (none) ntpd[339]: ntp engine ready
Oct  5 11:13:25 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 11:17:23 (none) apollo: Apollo stopped. (rc=0)
Oct  5 11:17:27 (none) exiting on signal 15
Oct  5 14:02:28 (none) syslogd 1.4.1: restart.
Oct  5 14:02:28 (none) syslog: Starting kernel logger... 
Oct  5 14:02:28 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 14:02:28 (none) kernel: Cannot find map file.
Oct  5 14:02:28 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 14:02:28 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 14:02:28 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 14:02:28 (none) kernel: On node 0 totalpages: 32768
Oct  5 14:02:28 (none) kernel: zone(0): 32768 pages.
Oct  5 14:02:28 (none) kernel: zone(1): 0 pages.
Oct  5 14:02:28 (none) kernel: zone(2): 0 pages.
Oct  5 14:02:28 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 14:02:28 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 14:02:28 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 14:02:28 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 14:02:29 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 14:02:29 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 14:02:29 (none) hostname: setting hostname to taurus_1908
Oct  5 14:02:29 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 14:02:29 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 14:02:29 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 14:02:29 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 14:02:29 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 14:02:29 (none) serial1: start
Oct  5 14:02:29 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 14:02:29 (none) kernel: Initializing RT netlink socket
Oct  5 14:02:29 (none) kernel: Starting kswapd
Oct  5 14:02:29 (none) kernel: Journalled Block Device driver loaded
Oct  5 14:02:29 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 14:02:29 (none) serial1: Setting serial port to raw mode
Oct  5 14:02:29 (none) kernel: Probing for Epson LCD controller
Oct  5 14:02:30 (none) serial1: port /dev/ttyS1
Oct  5 14:02:30 (none) kernel: Epson S1D13A05 detected
Oct  5 14:02:30 (none) serial1: speed 9600
Oct  5 14:02:30 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 14:02:30 (none) kernel: Console: switching to frame buffer device
Oct  5 14:02:30 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 14:02:30 (none) kernel: CPM UART driver version 0.04
Oct  5 14:02:30 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 14:02:30 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 14:02:30 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 14:02:30 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 14:02:30 (none) serial2: start
Oct  5 14:02:30 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 14:02:30 (none) kernel: Taurus input driver version 0.1
Oct  5 14:02:30 (none) serial2: Setting serial port to raw mode
Oct  5 14:02:30 (none) kernel: S1D13A05 IO
Oct  5 14:02:31 (none) serial2: port /dev/ttyS2
Oct  5 14:02:31 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 14:02:31 (none) serial2: speed 9600
Oct  5 14:02:31 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 14:02:31 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 14:02:31 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 14:02:31 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 14:02:31 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 14:02:31 (none) kernel: SLIP linefill/keepalive option.
Oct  5 14:02:31 (none) kernel: loop: loaded (max 8 devices)
Oct  5 14:02:31 (none) kernel: PPP generic driver version 2.4.2
Oct  5 14:02:31 (none) network_common: start
Oct  5 14:02:31 (none) kernel: PPP Deflate Compression module registered
Oct  5 14:02:31 (none) kernel: PPP BSD Compression module registered
Oct  5 14:02:31 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 14:02:32 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 14:02:32 (none) network_common: using static configuration for interface eth0...
Oct  5 14:02:32 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 14:02:32 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 14:02:32 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 14:02:32 (none) kernel:  Fixed Disk Card
Oct  5 14:02:32 (none) kernel:  IDE interface 
Oct  5 14:02:32 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 14:02:32 (none) kernel: Probing IDE interface ide0...
Oct  5 14:02:32 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 14:02:32 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 14:02:32 (none) kernel: Probing IDE interface ide1...
Oct  5 14:02:32 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 14:02:32 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 14:02:33 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 14:02:33 (none) kernel: hda: attached ide-disk driver.
Oct  5 14:02:33 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 14:02:33 (none) kernel: 
Oct  5 14:02:33 (none) kernel: hda: drive not ready for command
Oct  5 14:02:33 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 14:02:33 (none) kernel: hdc: attached ide-disk driver.
Oct  5 14:02:33 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 14:02:33 (none) kernel: Partition check:
Oct  5 14:02:33 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 14:02:33 (none) kernel: 
Oct  5 14:02:33 (none) kernel: hda: drive not ready for command
Oct  5 14:02:33 (none) kernel: hda: lost interrupt
Oct  5 14:02:33 (none) last message repeated 2 times
Oct  5 14:02:33 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 14:02:33 (none) kernel: hda: lost interrupt
Oct  5 14:02:34 (none) xinetd[160]: Started working: 3 available services
Oct  5 14:02:34 (none) kernel: hda: lost interrupt
Oct  5 14:02:34 (none) last message repeated 2 times
Oct  5 14:02:34 (none) kernel:  hda1
Oct  5 14:02:34 (none) kernel:  hdc: hdc1
Oct  5 14:02:34 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 14:02:34 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 14:02:34 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 14:02:34 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 14:02:34 (none) kernel: Using buffer write method
Oct  5 14:02:34 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 14:02:34 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 14:02:34 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 14:02:34 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 14:02:34 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 14:02:34 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 14:02:34 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 14:02:34 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 14:02:34 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 14:02:34 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 14:02:34 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 14:02:34 (none) kernel: Taurus ether LED driver V1.10
Oct  5 14:02:34 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 14:02:34 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 14:02:34 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 14:02:34 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 14:02:34 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 14:02:34 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 14:02:34 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 14:02:34 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 14:02:34 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 14:02:34 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 14:02:34 (none) kernel: 
Oct  5 14:02:34 (none) kernel: hda: drive not ready for command
Oct  5 14:02:34 (none) kernel: hda: lost interrupt
Oct  5 14:02:35 (none) last message repeated 6 times
Oct  5 14:02:35 (none) kernel:  hda1
Oct  5 14:02:35 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 14:02:35 (none) kernel: 
Oct  5 14:02:35 (none) kernel: hda: drive not ready for command
Oct  5 14:02:35 (none) kernel: hda: lost interrupt
Oct  5 14:02:35 (none) last message repeated 6 times
Oct  5 14:02:35 (none) kernel:  hda1
Oct  5 14:02:35 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 14:02:35 (none) kernel: 
Oct  5 14:02:35 (none) kernel: hda: drive not ready for command
Oct  5 14:02:35 (none) kernel: hda: lost interrupt
Oct  5 14:02:35 (none) kernel:  hdc: hdc1
Oct  5 14:02:35 (none) last message repeated 2 times
Oct  5 14:02:35 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 14:02:35 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 14:02:35 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 14:02:35 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 14:02:35 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 14:02:35 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 14:02:36 (none) tdma: TDMA over serial setup
Oct  5 14:02:37 (none) apollo: Starting Apollo
Oct  5 14:02:37 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 14:02:37 (none) sntp-server: Starting SNTP server process 
Oct  5 14:02:39 (none) log_manager: System log manager running 
Oct  5 14:02:44 (none) nmxbus-mtu: using large MTU
Oct  5 14:02:44 (none) nmxbus-mtu: Done
Oct  5 14:02:45 (none) sntp-client: Starting SNTP client process 
Oct  5 14:02:46 (none) ntpd[339]: ntp engine ready
Oct  5 14:03:10 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 14:07:07 (none) apollo: Apollo stopped. (rc=0)
Oct  5 14:07:11 (none) exiting on signal 15
Oct  5 16:49:58 (none) syslogd 1.4.1: restart.
Oct  5 16:49:58 (none) syslog: Starting kernel logger... 
Oct  5 16:49:59 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 16:49:59 (none) kernel: Cannot find map file.
Oct  5 16:49:59 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 16:49:59 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 16:49:59 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 16:49:59 (none) kernel: On node 0 totalpages: 32768
Oct  5 16:49:59 (none) kernel: zone(0): 32768 pages.
Oct  5 16:49:59 (none) kernel: zone(1): 0 pages.
Oct  5 16:49:59 (none) kernel: zone(2): 0 pages.
Oct  5 16:49:59 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 16:49:59 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 16:49:59 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 16:49:59 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 16:49:59 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 16:49:59 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 16:49:59 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 16:49:59 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 16:49:59 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 16:49:59 (none) hostname: setting hostname to taurus_1908
Oct  5 16:49:59 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 16:49:59 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 16:49:59 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 16:49:59 (none) kernel: Initializing RT netlink socket
Oct  5 16:49:59 (none) kernel: Starting kswapd
Oct  5 16:49:59 (none) kernel: Journalled Block Device driver loaded
Oct  5 16:49:59 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 16:49:59 (none) kernel: Probing for Epson LCD controller
Oct  5 16:49:59 (none) kernel: Epson S1D13A05 detected
Oct  5 16:49:59 (none) serial1: start
Oct  5 16:49:59 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 16:49:59 (none) kernel: Console: switching to frame buffer device
Oct  5 16:50:00 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 16:50:00 (none) serial1: Setting serial port to raw mode
Oct  5 16:50:00 (none) kernel: CPM UART driver version 0.04
Oct  5 16:50:00 (none) serial1: port /dev/ttyS1
Oct  5 16:50:00 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 16:50:00 (none) serial1: speed 9600
Oct  5 16:50:00 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 16:50:00 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 16:50:00 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 16:50:00 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 16:50:00 (none) kernel: Taurus input driver version 0.1
Oct  5 16:50:00 (none) kernel: S1D13A05 IO
Oct  5 16:50:00 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 16:50:00 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 16:50:00 (none) serial2: start
Oct  5 16:50:00 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 16:50:01 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 16:50:01 (none) serial2: Setting serial port to raw mode
Oct  5 16:50:01 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 16:50:01 (none) serial2: port /dev/ttyS2
Oct  5 16:50:01 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 16:50:01 (none) serial2: speed 9600
Oct  5 16:50:01 (none) kernel: SLIP linefill/keepalive option.
Oct  5 16:50:01 (none) kernel: loop: loaded (max 8 devices)
Oct  5 16:50:01 (none) kernel: PPP generic driver version 2.4.2
Oct  5 16:50:01 (none) kernel: PPP Deflate Compression module registered
Oct  5 16:50:01 (none) kernel: PPP BSD Compression module registered
Oct  5 16:50:01 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 16:50:01 (none) network_common: start
Oct  5 16:50:01 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 16:50:02 (none) network_common: using static configuration for interface eth0...
Oct  5 16:50:02 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 16:50:02 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 16:50:02 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 16:50:02 (none) kernel:  Fixed Disk Card
Oct  5 16:50:02 (none) kernel:  IDE interface 
Oct  5 16:50:02 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 16:50:02 (none) kernel: Probing IDE interface ide0...
Oct  5 16:50:02 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 16:50:02 (none) kernel: Probing IDE interface ide1...
Oct  5 16:50:02 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 16:50:02 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 16:50:03 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 16:50:03 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 16:50:03 (none) kernel: hda: attached ide-disk driver.
Oct  5 16:50:03 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 16:50:03 (none) kernel: 
Oct  5 16:50:03 (none) kernel: hda: drive not ready for command
Oct  5 16:50:03 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 16:50:03 (none) kernel: hdc: attached ide-disk driver.
Oct  5 16:50:03 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 16:50:03 (none) kernel: Partition check:
Oct  5 16:50:03 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 16:50:03 (none) kernel: 
Oct  5 16:50:03 (none) kernel: hda: drive not ready for command
Oct  5 16:50:03 (none) kernel: hda: lost interrupt
Oct  5 16:50:03 (none) last message repeated 6 times
Oct  5 16:50:04 (none) kernel:  hda1
Oct  5 16:50:04 (none) kernel:  hdc: hdc1
Oct  5 16:50:04 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 16:50:04 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 16:50:04 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 16:50:04 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 16:50:04 (none) kernel: Using buffer write method
Oct  5 16:50:04 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 16:50:04 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 16:50:04 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 16:50:04 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 16:50:04 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 16:50:04 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 16:50:04 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 16:50:04 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 16:50:04 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 16:50:04 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 16:50:04 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 16:50:04 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 16:50:04 (none) kernel: Taurus ether LED driver V1.10
Oct  5 16:50:04 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 16:50:04 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 16:50:04 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 16:50:04 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 16:50:04 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 16:50:04 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 16:50:04 (none) xinetd[160]: Started working: 3 available services
Oct  5 16:50:04 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 16:50:04 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 16:50:04 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 16:50:04 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 16:50:04 (none) kernel: 
Oct  5 16:50:04 (none) kernel: hda: drive not ready for command
Oct  5 16:50:05 (none) kernel: hda: lost interrupt
Oct  5 16:50:05 (none) last message repeated 6 times
Oct  5 16:50:05 (none) kernel:  hda1
Oct  5 16:50:05 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 16:50:05 (none) kernel: 
Oct  5 16:50:05 (none) kernel: hda: drive not ready for command
Oct  5 16:50:05 (none) kernel: hda: lost interrupt
Oct  5 16:50:05 (none) last message repeated 6 times
Oct  5 16:50:05 (none) kernel:  hda1
Oct  5 16:50:05 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 16:50:05 (none) kernel: 
Oct  5 16:50:05 (none) kernel: hda: drive not ready for command
Oct  5 16:50:05 (none) kernel: hda: lost interrupt
Oct  5 16:50:05 (none) kernel:  hdc: hdc1
Oct  5 16:50:05 (none) last message repeated 2 times
Oct  5 16:50:05 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 16:50:05 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 16:50:05 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 16:50:05 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 16:50:05 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 16:50:05 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 16:50:07 (none) tdma: TDMA over serial setup
Oct  5 16:50:07 (none) apollo: Starting Apollo
Oct  5 16:50:08 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 16:50:08 (none) sntp-server: Starting SNTP server process 
Oct  5 16:50:10 (none) log_manager: System log manager running 
Oct  5 16:50:15 (none) nmxbus-mtu: using large MTU
Oct  5 16:50:15 (none) nmxbus-mtu: Done
Oct  5 16:50:16 (none) sntp-client: Starting SNTP client process 
Oct  5 16:50:16 (none) ntpd[339]: ntp engine ready
Oct  5 16:50:37 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 16:54:41 (none) apollo: Apollo stopped. (rc=0)
Oct  5 16:54:46 (none) exiting on signal 15
Oct  5 19:38:13 (none) syslogd 1.4.1: restart.
Oct  5 19:38:13 (none) syslog: Starting kernel logger... 
Oct  5 19:38:14 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 19:38:14 (none) kernel: Cannot find map file.
Oct  5 19:38:14 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 19:38:14 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 19:38:14 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 19:38:14 (none) kernel: On node 0 totalpages: 32768
Oct  5 19:38:14 (none) kernel: zone(0): 32768 pages.
Oct  5 19:38:14 (none) kernel: zone(1): 0 pages.
Oct  5 19:38:14 (none) kernel: zone(2): 0 pages.
Oct  5 19:38:14 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 19:38:14 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 19:38:14 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 19:38:14 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 19:38:14 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 19:38:14 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 19:38:14 (none) hostname: setting hostname to taurus_1908
Oct  5 19:38:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 19:38:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 19:38:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 19:38:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 19:38:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 19:38:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 19:38:14 (none) kernel: Initializing RT netlink socket
Oct  5 19:38:14 (none) serial1: start
Oct  5 19:38:14 (none) kernel: Starting kswapd
Oct  5 19:38:15 (none) kernel: Journalled Block Device driver loaded
Oct  5 19:38:15 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 19:38:15 (none) serial1: Setting serial port to raw mode
Oct  5 19:38:15 (none) kernel: Probing for Epson LCD controller
Oct  5 19:38:15 (none) serial1: port /dev/ttyS1
Oct  5 19:38:15 (none) kernel: Epson S1D13A05 detected
Oct  5 19:38:15 (none) serial1: speed 9600
Oct  5 19:38:15 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 19:38:15 (none) kernel: Console: switching to frame buffer device
Oct  5 19:38:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 19:38:15 (none) kernel: CPM UART driver version 0.04
Oct  5 19:38:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 19:38:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 19:38:16 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 19:38:16 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 19:38:16 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 19:38:16 (none) kernel: Taurus input driver version 0.1
Oct  5 19:38:16 (none) kernel: S1D13A05 IO
Oct  5 19:38:16 (none) serial2: start
Oct  5 19:38:16 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 19:38:16 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 19:38:16 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 19:38:16 (none) serial2: Setting serial port to raw mode
Oct  5 19:38:16 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 19:38:16 (none) serial2: port /dev/ttyS2
Oct  5 19:38:16 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 19:38:16 (none) serial2: speed 9600
Oct  5 19:38:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 19:38:16 (none) kernel: SLIP linefill/keepalive option.
Oct  5 19:38:17 (none) kernel: loop: loaded (max 8 devices)
Oct  5 19:38:17 (none) network_common: start
Oct  5 19:38:17 (none) kernel: PPP generic driver version 2.4.2
Oct  5 19:38:17 (none) kernel: PPP Deflate Compression module registered
Oct  5 19:38:17 (none) network_common: using static configuration for interface eth0...
Oct  5 19:38:17 (none) kernel: PPP BSD Compression module registered
Oct  5 19:38:17 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 19:38:17 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 19:38:17 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 19:38:17 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 19:38:17 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 19:38:17 (none) kernel:  Fixed Disk Card
Oct  5 19:38:17 (none) kernel:  IDE interface 
Oct  5 19:38:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 19:38:17 (none) kernel: Probing IDE interface ide0...
Oct  5 19:38:17 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 19:38:17 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 19:38:18 (none) kernel: Probing IDE interface ide1...
Oct  5 19:38:18 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 19:38:18 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 19:38:18 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 19:38:18 (none) kernel: hda: attached ide-disk driver.
Oct  5 19:38:18 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 19:38:18 (none) kernel: 
Oct  5 19:38:18 (none) kernel: hda: drive not ready for command
Oct  5 19:38:18 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 19:38:18 (none) kernel: hdc: attached ide-disk driver.
Oct  5 19:38:18 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 19:38:18 (none) kernel: Partition check:
Oct  5 19:38:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 19:38:19 (none) kernel: 
Oct  5 19:38:19 (none) kernel: hda: drive not ready for command
Oct  5 19:38:19 (none) kernel: hda: lost interrupt
Oct  5 19:38:19 (none) last message repeated 4 times
Oct  5 19:38:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 19:38:19 (none) kernel: hda: lost interrupt
Oct  5 19:38:19 (none) xinetd[160]: Started working: 3 available services
Oct  5 19:38:19 (none) kernel: hda: lost interrupt
Oct  5 19:38:19 (none) kernel:  hda1
Oct  5 19:38:19 (none) kernel:  hdc: hdc1
Oct  5 19:38:19 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 19:38:19 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 19:38:19 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 19:38:19 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 19:38:19 (none) kernel: Using buffer write method
Oct  5 19:38:19 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 19:38:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 19:38:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 19:38:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 19:38:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 19:38:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 19:38:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 19:38:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 19:38:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 19:38:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 19:38:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 19:38:19 (none) kernel: Taurus ether LED driver V1.10
Oct  5 19:38:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 19:38:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 19:38:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 19:38:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 19:38:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 19:38:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 19:38:20 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 19:38:20 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 19:38:20 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 19:38:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 19:38:20 (none) kernel: 
Oct  5 19:38:20 (none) kernel: hda: drive not ready for command
Oct  5 19:38:20 (none) kernel: hda: lost interrupt
Oct  5 19:38:20 (none) last message repeated 6 times
Oct  5 19:38:20 (none) kernel:  hda1
Oct  5 19:38:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 19:38:20 (none) kernel: 
Oct  5 19:38:20 (none) kernel: hda: drive not ready for command
Oct  5 19:38:20 (none) kernel: hda: lost interrupt
Oct  5 19:38:20 (none) last message repeated 6 times
Oct  5 19:38:20 (none) kernel:  hda1
Oct  5 19:38:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 19:38:20 (none) kernel: 
Oct  5 19:38:20 (none) kernel: hda: drive not ready for command
Oct  5 19:38:20 (none) kernel: hda: lost interrupt
Oct  5 19:38:20 (none) kernel:  hdc: hdc1
Oct  5 19:38:20 (none) last message repeated 2 times
Oct  5 19:38:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 19:38:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 19:38:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 19:38:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 19:38:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 19:38:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 19:38:22 (none) tdma: TDMA over serial setup
Oct  5 19:38:22 (none) apollo: Starting Apollo
Oct  5 19:38:22 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 19:38:23 (none) sntp-server: Starting SNTP server process 
Oct  5 19:38:24 (none) log_manager: System log manager running 
Oct  5 19:38:29 (none) nmxbus-mtu: using large MTU
Oct  5 19:38:29 (none) nmxbus-mtu: Done
Oct  5 19:38:30 (none) sntp-client: Starting SNTP client process 
Oct  5 19:38:31 (none) ntpd[339]: ntp engine ready
Oct  5 19:38:58 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 19:42:56 (none) apollo: Apollo stopped. (rc=0)
Oct  5 19:43:00 (none) exiting on signal 15
Oct  5 22:25:58 (none) syslogd 1.4.1: restart.
Oct  5 22:25:58 (none) syslog: Starting kernel logger... 
Oct  5 22:25:59 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct  5 22:25:59 (none) kernel: Cannot find map file.
Oct  5 22:25:59 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct  5 22:25:59 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct  5 22:25:59 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct  5 22:25:59 (none) kernel: On node 0 totalpages: 32768
Oct  5 22:25:59 (none) kernel: zone(0): 32768 pages.
Oct  5 22:25:59 (none) kernel: zone(1): 0 pages.
Oct  5 22:25:59 (none) kernel: zone(2): 0 pages.
Oct  5 22:25:59 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct  5 22:25:59 (none) kernel: Decrementer Frequency = 249999960/60
Oct  5 22:25:59 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct  5 22:25:59 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct  5 22:25:59 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct  5 22:25:59 (none) hostname: setting hostname to taurus_1908
Oct  5 22:25:59 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct  5 22:25:59 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct  5 22:25:59 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  5 22:25:59 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct  5 22:25:59 (none) kernel: POSIX conformance testing by UNIFIX
Oct  5 22:25:59 (none) kernel: Linux NET4.0 for Linux 2.4
Oct  5 22:25:59 (none) serial1: start
Oct  5 22:25:59 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct  5 22:25:59 (none) kernel: Initializing RT netlink socket
Oct  5 22:25:59 (none) kernel: Starting kswapd
Oct  5 22:26:00 (none) kernel: Journalled Block Device driver loaded
Oct  5 22:26:00 (none) serial1: Setting serial port to raw mode
Oct  5 22:26:00 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct  5 22:26:00 (none) serial1: port /dev/ttyS1
Oct  5 22:26:00 (none) kernel: Probing for Epson LCD controller
Oct  5 22:26:00 (none) serial1: speed 9600
Oct  5 22:26:00 (none) kernel: Epson S1D13A05 detected
Oct  5 22:26:00 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct  5 22:26:00 (none) kernel: Console: switching to frame buffer device
Oct  5 22:26:00 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct  5 22:26:00 (none) kernel: CPM UART driver version 0.04
Oct  5 22:26:00 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct  5 22:26:00 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct  5 22:26:00 (none) kernel: pty: 256 Unix98 ptys configured
Oct  5 22:26:00 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct  5 22:26:00 (none) serial2: start
Oct  5 22:26:01 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct  5 22:26:01 (none) kernel: Taurus input driver version 0.1
Oct  5 22:26:01 (none) serial2: Setting serial port to raw mode
Oct  5 22:26:01 (none) kernel: S1D13A05 IO
Oct  5 22:26:01 (none) serial2: port /dev/ttyS2
Oct  5 22:26:01 (none) kernel: Taurus scan keyboard driver V1.00
Oct  5 22:26:01 (none) serial2: speed 9600
Oct  5 22:26:01 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct  5 22:26:01 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct  5 22:26:01 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct  5 22:26:01 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct  5 22:26:01 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct  5 22:26:01 (none) network_common: start
Oct  5 22:26:01 (none) kernel: SLIP linefill/keepalive option.
Oct  5 22:26:02 (none) kernel: loop: loaded (max 8 devices)
Oct  5 22:26:02 (none) kernel: PPP generic driver version 2.4.2
Oct  5 22:26:02 (none) network_common: using static configuration for interface eth0...
Oct  5 22:26:02 (none) kernel: PPP Deflate Compression module registered
Oct  5 22:26:02 (none) kernel: PPP BSD Compression module registered
Oct  5 22:26:02 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct  5 22:26:02 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct  5 22:26:02 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct  5 22:26:02 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct  5 22:26:02 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct  5 22:26:02 (none) kernel:  Fixed Disk Card
Oct  5 22:26:02 (none) kernel:  IDE interface 
Oct  5 22:26:02 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct  5 22:26:02 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct  5 22:26:02 (none) kernel: Probing IDE interface ide0...
Oct  5 22:26:03 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct  5 22:26:03 (none) kernel: Probing IDE interface ide1...
Oct  5 22:26:03 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct  5 22:26:03 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct  5 22:26:03 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct  5 22:26:03 (none) kernel: hda: attached ide-disk driver.
Oct  5 22:26:03 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 22:26:03 (none) kernel: 
Oct  5 22:26:03 (none) kernel: hda: drive not ready for command
Oct  5 22:26:03 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct  5 22:26:03 (none) kernel: hdc: attached ide-disk driver.
Oct  5 22:26:03 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct  5 22:26:03 (none) kernel: Partition check:
Oct  5 22:26:03 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 22:26:03 (none) kernel: 
Oct  5 22:26:03 (none) kernel: hda: drive not ready for command
Oct  5 22:26:03 (none) kernel: hda: lost interrupt
Oct  5 22:26:04 (none) last message repeated 3 times
Oct  5 22:26:04 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct  5 22:26:04 (none) kernel: hda: lost interrupt
Oct  5 22:26:04 (none) xinetd[160]: Started working: 3 available services
Oct  5 22:26:04 (none) kernel: hda: lost interrupt
Oct  5 22:26:04 (none) kernel: hda: lost interrupt
Oct  5 22:26:04 (none) kernel:  hda1
Oct  5 22:26:04 (none) kernel:  hdc: hdc1
Oct  5 22:26:04 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct  5 22:26:04 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct  5 22:26:04 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct  5 22:26:04 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct  5 22:26:04 (none) kernel: Using buffer write method
Oct  5 22:26:04 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct  5 22:26:04 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct  5 22:26:04 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct  5 22:26:04 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct  5 22:26:04 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct  5 22:26:04 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct  5 22:26:04 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct  5 22:26:04 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct  5 22:26:04 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct  5 22:26:04 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct  5 22:26:04 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct  5 22:26:04 (none) kernel: Taurus ether LED driver V1.10
Oct  5 22:26:04 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  5 22:26:04 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  5 22:26:04 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct  5 22:26:04 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct  5 22:26:04 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct  5 22:26:04 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct  5 22:26:04 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct  5 22:26:05 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct  5 22:26:05 (none) kernel: Freeing unused kernel memory: 80k init
Oct  5 22:26:05 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 22:26:05 (none) kernel: 
Oct  5 22:26:05 (none) kernel: hda: drive not ready for command
Oct  5 22:26:05 (none) kernel: hda: lost interrupt
Oct  5 22:26:05 (none) last message repeated 6 times
Oct  5 22:26:05 (none) kernel:  hda1
Oct  5 22:26:05 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 22:26:05 (none) kernel: 
Oct  5 22:26:05 (none) kernel: hda: drive not ready for command
Oct  5 22:26:05 (none) kernel: hda: lost interrupt
Oct  5 22:26:05 (none) last message repeated 6 times
Oct  5 22:26:05 (none) kernel:  hda1
Oct  5 22:26:05 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct  5 22:26:05 (none) kernel: 
Oct  5 22:26:05 (none) kernel: hda: drive not ready for command
Oct  5 22:26:05 (none) kernel: hda: lost interrupt
Oct  5 22:26:05 (none) kernel:  hdc: hdc1
Oct  5 22:26:05 (none) last message repeated 2 times
Oct  5 22:26:05 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct  5 22:26:05 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct  5 22:26:05 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct  5 22:26:05 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct  5 22:26:05 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct  5 22:26:05 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct  5 22:26:07 (none) tdma: TDMA over serial setup
Oct  5 22:26:07 (none) apollo: Starting Apollo
Oct  5 22:26:07 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct  5 22:26:08 (none) sntp-server: Starting SNTP server process 
Oct  5 22:26:09 (none) log_manager: System log manager running 
Oct  5 22:26:14 (none) nmxbus-mtu: using large MTU
Oct  5 22:26:14 (none) nmxbus-mtu: Done
Oct  5 22:26:16 (none) sntp-client: Starting SNTP client process 
Oct  5 22:26:16 (none) ntpd[339]: ntp engine ready
Oct  5 22:26:44 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct  5 22:30:37 (none) apollo: Apollo stopped. (rc=0)
Oct  5 22:30:41 (none) exiting on signal 15