Oct 10 00:43:43 (none) syslogd 1.4.1: restart.
Oct 10 00:43:43 (none) syslog: Starting kernel logger... 
Oct 10 00:43:44 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 00:43:44 (none) kernel: Cannot find map file.
Oct 10 00:43:44 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 00:43:44 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 00:43:44 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 00:43:44 (none) kernel: On node 0 totalpages: 32768
Oct 10 00:43:44 (none) kernel: zone(0): 32768 pages.
Oct 10 00:43:44 (none) kernel: zone(1): 0 pages.
Oct 10 00:43:44 (none) kernel: zone(2): 0 pages.
Oct 10 00:43:44 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 00:43:44 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 00:43:44 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 00:43:44 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 00:43:44 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 00:43:44 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 00:43:44 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 00:43:44 (none) hostname: setting hostname to taurus_1908
Oct 10 00:43:44 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 00:43:44 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 00:43:44 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 00:43:44 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 00:43:44 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 00:43:44 (none) kernel: Initializing RT netlink socket
Oct 10 00:43:44 (none) kernel: Starting kswapd
Oct 10 00:43:44 (none) kernel: Journalled Block Device driver loaded
Oct 10 00:43:44 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 00:43:44 (none) serial1: start
Oct 10 00:43:44 (none) kernel: Probing for Epson LCD controller
Oct 10 00:43:44 (none) kernel: Epson S1D13A05 detected
Oct 10 00:43:44 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 00:43:44 (none) kernel: Console: switching to frame buffer device
Oct 10 00:43:45 (none) serial1: Setting serial port to raw mode
Oct 10 00:43:45 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 00:43:45 (none) serial1: port /dev/ttyS1
Oct 10 00:43:45 (none) kernel: CPM UART driver version 0.04
Oct 10 00:43:45 (none) serial1: speed 9600
Oct 10 00:43:45 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 00:43:45 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 00:43:45 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 00:43:45 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 00:43:45 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 00:43:45 (none) kernel: Taurus input driver version 0.1
Oct 10 00:43:45 (none) kernel: S1D13A05 IO
Oct 10 00:43:45 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 00:43:45 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 00:43:45 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 00:43:45 (none) serial2: start
Oct 10 00:43:45 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 00:43:46 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 00:43:46 (none) serial2: Setting serial port to raw mode
Oct 10 00:43:46 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 00:43:46 (none) serial2: port /dev/ttyS2
Oct 10 00:43:46 (none) kernel: SLIP linefill/keepalive option.
Oct 10 00:43:46 (none) serial2: speed 9600
Oct 10 00:43:46 (none) kernel: loop: loaded (max 8 devices)
Oct 10 00:43:46 (none) kernel: PPP generic driver version 2.4.2
Oct 10 00:43:46 (none) kernel: PPP Deflate Compression module registered
Oct 10 00:43:46 (none) kernel: PPP BSD Compression module registered
Oct 10 00:43:46 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 00:43:46 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 00:43:46 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 00:43:46 (none) network_common: start
Oct 10 00:43:46 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 00:43:46 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 00:43:46 (none) kernel:  Fixed Disk Card
Oct 10 00:43:46 (none) network_common: using static configuration for interface eth0...
Oct 10 00:43:47 (none) kernel:  IDE interface 
Oct 10 00:43:47 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 00:43:47 (none) kernel: Probing IDE interface ide0...
Oct 10 00:43:47 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 00:43:47 (none) kernel: Probing IDE interface ide1...
Oct 10 00:43:47 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 00:43:47 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 00:43:47 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 00:43:47 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 00:43:47 (none) kernel: hda: attached ide-disk driver.
Oct 10 00:43:47 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 00:43:47 (none) kernel: 
Oct 10 00:43:47 (none) kernel: hda: drive not ready for command
Oct 10 00:43:47 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 00:43:48 (none) kernel: hdc: attached ide-disk driver.
Oct 10 00:43:48 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 00:43:48 (none) kernel: Partition check:
Oct 10 00:43:48 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 00:43:48 (none) kernel: 
Oct 10 00:43:48 (none) kernel: hda: drive not ready for command
Oct 10 00:43:48 (none) kernel: hda: lost interrupt
Oct 10 00:43:48 (none) last message repeated 6 times
Oct 10 00:43:48 (none) kernel:  hda1
Oct 10 00:43:48 (none) kernel:  hdc: hdc1
Oct 10 00:43:48 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 00:43:48 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 00:43:48 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 00:43:48 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 00:43:48 (none) kernel: Using buffer write method
Oct 10 00:43:48 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 00:43:49 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 00:43:49 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 00:43:49 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 00:43:49 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 00:43:49 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 00:43:49 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 00:43:49 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 00:43:49 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 00:43:49 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 00:43:49 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 00:43:49 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 00:43:49 (none) kernel: Taurus ether LED driver V1.10
Oct 10 00:43:49 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 00:43:49 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 00:43:49 (none) xinetd[160]: Started working: 3 available services
Oct 10 00:43:49 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 00:43:49 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 00:43:49 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 00:43:49 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 00:43:49 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 00:43:49 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 00:43:49 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 00:43:49 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 00:43:49 (none) kernel: 
Oct 10 00:43:49 (none) kernel: hda: drive not ready for command
Oct 10 00:43:49 (none) kernel: hda: lost interrupt
Oct 10 00:43:49 (none) last message repeated 6 times
Oct 10 00:43:49 (none) kernel:  hda1
Oct 10 00:43:49 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 00:43:50 (none) kernel: 
Oct 10 00:43:50 (none) kernel: hda: drive not ready for command
Oct 10 00:43:50 (none) kernel: hda: lost interrupt
Oct 10 00:43:50 (none) last message repeated 6 times
Oct 10 00:43:50 (none) kernel:  hda1
Oct 10 00:43:50 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 00:43:50 (none) kernel: 
Oct 10 00:43:50 (none) kernel: hda: drive not ready for command
Oct 10 00:43:50 (none) kernel: hda: lost interrupt
Oct 10 00:43:50 (none) kernel:  hdc: hdc1
Oct 10 00:43:50 (none) last message repeated 2 times
Oct 10 00:43:50 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 00:43:50 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 00:43:50 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 00:43:50 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 00:43:50 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 00:43:50 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 00:43:52 (none) tdma: TDMA over serial setup
Oct 10 00:43:52 (none) apollo: Starting Apollo
Oct 10 00:43:52 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 00:43:53 (none) sntp-server: Starting SNTP server process 
Oct 10 00:43:55 (none) log_manager: System log manager running 
Oct 10 00:43:59 (none) nmxbus-mtu: using large MTU
Oct 10 00:43:59 (none) nmxbus-mtu: Done
Oct 10 00:44:01 (none) sntp-client: Starting SNTP client process 
Oct 10 00:44:01 (none) ntpd[339]: ntp engine ready
Oct 10 00:44:22 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 00:48:27 (none) apollo: Apollo stopped. (rc=0)
Oct 10 00:48:31 (none) exiting on signal 15
Oct 10 03:34:43 (none) syslogd 1.4.1: restart.
Oct 10 03:34:43 (none) syslog: Starting kernel logger... 
Oct 10 03:34:43 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 03:34:43 (none) kernel: Cannot find map file.
Oct 10 03:34:43 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 03:34:43 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 03:34:43 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 03:34:43 (none) kernel: On node 0 totalpages: 32768
Oct 10 03:34:43 (none) kernel: zone(0): 32768 pages.
Oct 10 03:34:43 (none) kernel: zone(1): 0 pages.
Oct 10 03:34:43 (none) kernel: zone(2): 0 pages.
Oct 10 03:34:43 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 03:34:43 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 03:34:43 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 03:34:43 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 03:34:43 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 03:34:43 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 03:34:43 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 03:34:43 (none) hostname: setting hostname to taurus_1908
Oct 10 03:34:43 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 03:34:44 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 03:34:44 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 03:34:44 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 03:34:44 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 03:34:44 (none) serial1: start
Oct 10 03:34:44 (none) kernel: Initializing RT netlink socket
Oct 10 03:34:44 (none) kernel: Starting kswapd
Oct 10 03:34:44 (none) kernel: Journalled Block Device driver loaded
Oct 10 03:34:44 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 03:34:44 (none) kernel: Probing for Epson LCD controller
Oct 10 03:34:44 (none) serial1: Setting serial port to raw mode
Oct 10 03:34:44 (none) kernel: Epson S1D13A05 detected
Oct 10 03:34:45 (none) serial1: port /dev/ttyS1
Oct 10 03:34:45 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 03:34:45 (none) serial1: speed 9600
Oct 10 03:34:45 (none) kernel: Console: switching to frame buffer device
Oct 10 03:34:45 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 03:34:45 (none) kernel: CPM UART driver version 0.04
Oct 10 03:34:45 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 03:34:45 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 03:34:45 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 03:34:45 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 03:34:45 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 03:34:45 (none) kernel: Taurus input driver version 0.1
Oct 10 03:34:45 (none) serial2: start
Oct 10 03:34:45 (none) kernel: S1D13A05 IO
Oct 10 03:34:45 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 03:34:45 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 03:34:45 (none) serial2: Setting serial port to raw mode
Oct 10 03:34:46 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 03:34:46 (none) serial2: port /dev/ttyS2
Oct 10 03:34:46 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 03:34:46 (none) serial2: speed 9600
Oct 10 03:34:46 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 03:34:46 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 03:34:46 (none) kernel: SLIP linefill/keepalive option.
Oct 10 03:34:46 (none) kernel: loop: loaded (max 8 devices)
Oct 10 03:34:46 (none) network_common: start
Oct 10 03:34:46 (none) kernel: PPP generic driver version 2.4.2
Oct 10 03:34:46 (none) kernel: PPP Deflate Compression module registered
Oct 10 03:34:46 (none) kernel: PPP BSD Compression module registered
Oct 10 03:34:46 (none) network_common: using static configuration for interface eth0...
Oct 10 03:34:46 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 03:34:47 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 03:34:47 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 03:34:47 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 03:34:47 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 03:34:47 (none) kernel:  Fixed Disk Card
Oct 10 03:34:47 (none) kernel:  IDE interface 
Oct 10 03:34:47 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 03:34:47 (none) kernel: Probing IDE interface ide0...
Oct 10 03:34:47 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 03:34:47 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 03:34:47 (none) kernel: Probing IDE interface ide1...
Oct 10 03:34:47 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 03:34:47 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 03:34:47 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 03:34:48 (none) kernel: hda: attached ide-disk driver.
Oct 10 03:34:48 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 03:34:48 (none) kernel: 
Oct 10 03:34:48 (none) kernel: hda: drive not ready for command
Oct 10 03:34:48 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 03:34:48 (none) kernel: hdc: attached ide-disk driver.
Oct 10 03:34:48 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 03:34:48 (none) kernel: Partition check:
Oct 10 03:34:48 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 03:34:48 (none) kernel: 
Oct 10 03:34:48 (none) kernel: hda: drive not ready for command
Oct 10 03:34:48 (none) kernel: hda: lost interrupt
Oct 10 03:34:48 (none) last message repeated 3 times
Oct 10 03:34:48 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 03:34:48 (none) kernel: hda: lost interrupt
Oct 10 03:34:48 (none) xinetd[160]: Started working: 3 available services
Oct 10 03:34:48 (none) kernel: hda: lost interrupt
Oct 10 03:34:48 (none) kernel: hda: lost interrupt
Oct 10 03:34:49 (none) kernel:  hda1
Oct 10 03:34:49 (none) kernel:  hdc: hdc1
Oct 10 03:34:49 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 03:34:49 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 03:34:49 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 03:34:49 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 03:34:49 (none) kernel: Using buffer write method
Oct 10 03:34:49 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 03:34:49 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 03:34:49 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 03:34:49 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 03:34:49 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 03:34:49 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 03:34:49 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 03:34:49 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 03:34:49 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 03:34:49 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 03:34:49 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 03:34:49 (none) kernel: Taurus ether LED driver V1.10
Oct 10 03:34:49 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 03:34:49 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 03:34:49 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 03:34:49 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 03:34:49 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 03:34:49 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 03:34:49 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 03:34:49 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 03:34:49 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 03:34:49 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 03:34:49 (none) kernel: 
Oct 10 03:34:49 (none) kernel: hda: drive not ready for command
Oct 10 03:34:49 (none) kernel: hda: lost interrupt
Oct 10 03:34:49 (none) last message repeated 6 times
Oct 10 03:34:49 (none) kernel:  hda1
Oct 10 03:34:49 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 03:34:49 (none) kernel: 
Oct 10 03:34:50 (none) kernel: hda: drive not ready for command
Oct 10 03:34:50 (none) kernel: hda: lost interrupt
Oct 10 03:34:50 (none) last message repeated 6 times
Oct 10 03:34:50 (none) kernel:  hda1
Oct 10 03:34:50 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 03:34:50 (none) kernel: 
Oct 10 03:34:50 (none) kernel: hda: drive not ready for command
Oct 10 03:34:50 (none) kernel: hda: lost interrupt
Oct 10 03:34:50 (none) kernel:  hdc: hdc1
Oct 10 03:34:50 (none) last message repeated 2 times
Oct 10 03:34:50 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 03:34:50 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 03:34:50 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 03:34:50 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 03:34:50 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 03:34:50 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 03:34:51 (none) tdma: TDMA over serial setup
Oct 10 03:34:52 (none) apollo: Starting Apollo
Oct 10 03:34:52 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 03:34:52 (none) sntp-server: Starting SNTP server process 
Oct 10 03:34:54 (none) log_manager: System log manager running 
Oct 10 03:34:57 (none) log_manager: removing /var/logs/system_20200831-01.log 
Oct 10 03:34:59 (none) nmxbus-mtu: using large MTU
Oct 10 03:35:00 (none) nmxbus-mtu: Done
Oct 10 03:35:00 (none) sntp-client: Starting SNTP client process 
Oct 10 03:35:01 (none) ntpd[350]: ntp engine ready
Oct 10 03:35:29 (none) ntpd[350]: peer 1.0.0.2 now valid
Oct 10 03:39:23 (none) apollo: Apollo stopped. (rc=0)
Oct 10 03:39:27 (none) exiting on signal 15
Oct 10 06:25:13 (none) syslogd 1.4.1: restart.
Oct 10 06:25:13 (none) syslog: Starting kernel logger... 
Oct 10 06:25:13 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 06:25:13 (none) kernel: Cannot find map file.
Oct 10 06:25:13 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 06:25:13 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 06:25:13 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 06:25:13 (none) kernel: On node 0 totalpages: 32768
Oct 10 06:25:13 (none) kernel: zone(0): 32768 pages.
Oct 10 06:25:13 (none) kernel: zone(1): 0 pages.
Oct 10 06:25:13 (none) kernel: zone(2): 0 pages.
Oct 10 06:25:13 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 06:25:13 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 06:25:13 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 06:25:13 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 06:25:14 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 06:25:14 (none) hostname: setting hostname to taurus_1908
Oct 10 06:25:14 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 06:25:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 06:25:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 06:25:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 06:25:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 06:25:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 06:25:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 06:25:14 (none) serial1: start
Oct 10 06:25:14 (none) kernel: Initializing RT netlink socket
Oct 10 06:25:14 (none) kernel: Starting kswapd
Oct 10 06:25:14 (none) kernel: Journalled Block Device driver loaded
Oct 10 06:25:14 (none) serial1: Setting serial port to raw mode
Oct 10 06:25:14 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 06:25:14 (none) serial1: port /dev/ttyS1
Oct 10 06:25:15 (none) kernel: Probing for Epson LCD controller
Oct 10 06:25:15 (none) serial1: speed 9600
Oct 10 06:25:15 (none) kernel: Epson S1D13A05 detected
Oct 10 06:25:15 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 06:25:15 (none) kernel: Console: switching to frame buffer device
Oct 10 06:25:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 06:25:15 (none) kernel: CPM UART driver version 0.04
Oct 10 06:25:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 06:25:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 06:25:15 (none) serial2: start
Oct 10 06:25:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 06:25:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 06:25:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 06:25:15 (none) kernel: Taurus input driver version 0.1
Oct 10 06:25:15 (none) serial2: Setting serial port to raw mode
Oct 10 06:25:15 (none) kernel: S1D13A05 IO
Oct 10 06:25:16 (none) serial2: port /dev/ttyS2
Oct 10 06:25:16 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 06:25:16 (none) serial2: speed 9600
Oct 10 06:25:16 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 06:25:16 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 06:25:16 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 06:25:16 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 06:25:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 06:25:16 (none) network_common: start
Oct 10 06:25:16 (none) kernel: SLIP linefill/keepalive option.
Oct 10 06:25:16 (none) kernel: loop: loaded (max 8 devices)
Oct 10 06:25:16 (none) kernel: PPP generic driver version 2.4.2
Oct 10 06:25:17 (none) network_common: using static configuration for interface eth0...
Oct 10 06:25:17 (none) kernel: PPP Deflate Compression module registered
Oct 10 06:25:17 (none) kernel: PPP BSD Compression module registered
Oct 10 06:25:17 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 06:25:17 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 06:25:17 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 06:25:17 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 06:25:17 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 06:25:17 (none) kernel:  Fixed Disk Card
Oct 10 06:25:17 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 06:25:17 (none) kernel:  IDE interface 
Oct 10 06:25:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 06:25:17 (none) kernel: Probing IDE interface ide0...
Oct 10 06:25:17 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 06:25:18 (none) kernel: Probing IDE interface ide1...
Oct 10 06:25:18 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 06:25:18 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 06:25:18 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 06:25:18 (none) kernel: hda: attached ide-disk driver.
Oct 10 06:25:18 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 06:25:18 (none) kernel: 
Oct 10 06:25:18 (none) kernel: hda: drive not ready for command
Oct 10 06:25:18 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 06:25:18 (none) kernel: hdc: attached ide-disk driver.
Oct 10 06:25:18 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 06:25:18 (none) kernel: Partition check:
Oct 10 06:25:18 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 06:25:18 (none) kernel: 
Oct 10 06:25:18 (none) kernel: hda: drive not ready for command
Oct 10 06:25:18 (none) kernel: hda: lost interrupt
Oct 10 06:25:19 (none) last message repeated 2 times
Oct 10 06:25:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 06:25:19 (none) kernel: hda: lost interrupt
Oct 10 06:25:19 (none) xinetd[160]: Started working: 3 available services
Oct 10 06:25:19 (none) kernel: hda: lost interrupt
Oct 10 06:25:19 (none) last message repeated 2 times
Oct 10 06:25:19 (none) kernel:  hda1
Oct 10 06:25:19 (none) kernel:  hdc: hdc1
Oct 10 06:25:19 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 06:25:19 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 06:25:19 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 06:25:19 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 06:25:19 (none) kernel: Using buffer write method
Oct 10 06:25:19 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 06:25:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 06:25:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 06:25:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 06:25:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 06:25:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 06:25:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 06:25:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 06:25:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 06:25:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 06:25:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 06:25:19 (none) kernel: Taurus ether LED driver V1.10
Oct 10 06:25:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 06:25:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 06:25:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 06:25:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 06:25:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 06:25:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 06:25:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 06:25:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 06:25:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 06:25:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 06:25:19 (none) kernel: 
Oct 10 06:25:19 (none) kernel: hda: drive not ready for command
Oct 10 06:25:20 (none) kernel: hda: lost interrupt
Oct 10 06:25:20 (none) last message repeated 6 times
Oct 10 06:25:20 (none) kernel:  hda1
Oct 10 06:25:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 06:25:20 (none) kernel: 
Oct 10 06:25:20 (none) kernel: hda: drive not ready for command
Oct 10 06:25:20 (none) kernel: hda: lost interrupt
Oct 10 06:25:20 (none) last message repeated 6 times
Oct 10 06:25:20 (none) kernel:  hda1
Oct 10 06:25:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 06:25:20 (none) kernel: 
Oct 10 06:25:20 (none) kernel: hda: drive not ready for command
Oct 10 06:25:20 (none) kernel: hda: lost interrupt
Oct 10 06:25:20 (none) kernel:  hdc: hdc1
Oct 10 06:25:20 (none) last message repeated 2 times
Oct 10 06:25:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 06:25:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 06:25:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 06:25:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 06:25:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 06:25:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 06:25:21 (none) tdma: TDMA over serial setup
Oct 10 06:25:22 (none) apollo: Starting Apollo
Oct 10 06:25:22 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 06:25:22 (none) sntp-server: Starting SNTP server process 
Oct 10 06:25:24 (none) log_manager: System log manager running 
Oct 10 06:25:29 (none) nmxbus-mtu: using large MTU
Oct 10 06:25:29 (none) nmxbus-mtu: Done
Oct 10 06:25:31 (none) sntp-client: Starting SNTP client process 
Oct 10 06:25:32 (none) ntpd[339]: ntp engine ready
Oct 10 06:25:53 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 06:29:51 (none) apollo: Apollo stopped. (rc=0)
Oct 10 06:29:54 (none) exiting on signal 15
Oct 10 09:12:58 (none) syslogd 1.4.1: restart.
Oct 10 09:12:58 (none) syslog: Starting kernel logger... 
Oct 10 09:12:58 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 09:12:58 (none) kernel: Cannot find map file.
Oct 10 09:12:58 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 09:12:58 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 09:12:58 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 09:12:58 (none) kernel: On node 0 totalpages: 32768
Oct 10 09:12:58 (none) kernel: zone(0): 32768 pages.
Oct 10 09:12:58 (none) kernel: zone(1): 0 pages.
Oct 10 09:12:58 (none) kernel: zone(2): 0 pages.
Oct 10 09:12:58 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 09:12:58 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 09:12:58 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 09:12:58 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 09:12:58 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 09:12:58 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 09:12:58 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 09:12:59 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 09:12:59 (none) hostname: setting hostname to taurus_1908
Oct 10 09:12:59 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 09:12:59 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 09:12:59 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 09:12:59 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 09:12:59 (none) kernel: Initializing RT netlink socket
Oct 10 09:12:59 (none) kernel: Starting kswapd
Oct 10 09:12:59 (none) kernel: Journalled Block Device driver loaded
Oct 10 09:12:59 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 09:12:59 (none) kernel: Probing for Epson LCD controller
Oct 10 09:12:59 (none) kernel: Epson S1D13A05 detected
Oct 10 09:12:59 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 09:12:59 (none) kernel: Console: switching to frame buffer device
Oct 10 09:12:59 (none) serial1: start
Oct 10 09:12:59 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 09:12:59 (none) kernel: CPM UART driver version 0.04
Oct 10 09:12:59 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 09:13:00 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 09:12:59 (none) serial1: Setting serial port to raw mode
Oct 10 09:13:00 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 09:13:00 (none) serial1: port /dev/ttyS1
Oct 10 09:13:00 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 09:13:00 (none) serial1: speed 9600
Oct 10 09:13:00 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 09:13:00 (none) kernel: Taurus input driver version 0.1
Oct 10 09:13:00 (none) kernel: S1D13A05 IO
Oct 10 09:13:00 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 09:13:00 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 09:13:00 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 09:13:00 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 09:13:00 (none) serial2: start
Oct 10 09:13:00 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 09:13:00 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 09:13:00 (none) kernel: SLIP linefill/keepalive option.
Oct 10 09:13:00 (none) kernel: loop: loaded (max 8 devices)
Oct 10 09:13:01 (none) serial2: Setting serial port to raw mode
Oct 10 09:13:01 (none) kernel: PPP generic driver version 2.4.2
Oct 10 09:13:01 (none) serial2: port /dev/ttyS2
Oct 10 09:13:01 (none) kernel: PPP Deflate Compression module registered
Oct 10 09:13:01 (none) serial2: speed 9600
Oct 10 09:13:01 (none) kernel: PPP BSD Compression module registered
Oct 10 09:13:01 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 09:13:01 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 09:13:01 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 09:13:01 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 09:13:01 (none) network_common: start
Oct 10 09:13:01 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 09:13:02 (none) kernel:  Fixed Disk Card
Oct 10 09:13:02 (none) network_common: using static configuration for interface eth0...
Oct 10 09:13:02 (none) kernel:  IDE interface 
Oct 10 09:13:02 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 09:13:02 (none) kernel: Probing IDE interface ide0...
Oct 10 09:13:02 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 09:13:02 (none) kernel: Probing IDE interface ide1...
Oct 10 09:13:02 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 09:13:02 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 09:13:02 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 09:13:02 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 09:13:03 (none) kernel: hda: attached ide-disk driver.
Oct 10 09:13:03 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 09:13:03 (none) kernel: 
Oct 10 09:13:03 (none) kernel: hda: drive not ready for command
Oct 10 09:13:03 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 09:13:03 (none) kernel: hdc: attached ide-disk driver.
Oct 10 09:13:03 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 09:13:03 (none) kernel: Partition check:
Oct 10 09:13:03 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 09:13:03 (none) kernel: 
Oct 10 09:13:03 (none) kernel: hda: drive not ready for command
Oct 10 09:13:03 (none) kernel: hda: lost interrupt
Oct 10 09:13:03 (none) last message repeated 6 times
Oct 10 09:13:03 (none) kernel:  hda1
Oct 10 09:13:03 (none) kernel:  hdc: hdc1
Oct 10 09:13:04 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 09:13:04 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 09:13:04 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 09:13:04 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 09:13:04 (none) kernel: Using buffer write method
Oct 10 09:13:04 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 09:13:04 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 09:13:04 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 09:13:04 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 09:13:04 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 09:13:04 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 09:13:04 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 09:13:04 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 09:13:04 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 09:13:04 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 09:13:04 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 09:13:04 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 09:13:04 (none) kernel: Taurus ether LED driver V1.10
Oct 10 09:13:04 (none) xinetd[160]: Started working: 3 available services
Oct 10 09:13:04 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 09:13:04 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 09:13:04 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 09:13:04 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 09:13:04 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 09:13:04 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 09:13:04 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 09:13:04 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 09:13:04 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 09:13:04 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 09:13:04 (none) kernel: 
Oct 10 09:13:04 (none) kernel: hda: drive not ready for command
Oct 10 09:13:04 (none) kernel: hda: lost interrupt
Oct 10 09:13:04 (none) last message repeated 6 times
Oct 10 09:13:05 (none) kernel:  hda1
Oct 10 09:13:05 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 09:13:05 (none) kernel: 
Oct 10 09:13:05 (none) kernel: hda: drive not ready for command
Oct 10 09:13:05 (none) kernel: hda: lost interrupt
Oct 10 09:13:05 (none) last message repeated 6 times
Oct 10 09:13:05 (none) kernel:  hda1
Oct 10 09:13:05 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 09:13:05 (none) kernel: 
Oct 10 09:13:05 (none) kernel: hda: drive not ready for command
Oct 10 09:13:05 (none) kernel: hda: lost interrupt
Oct 10 09:13:05 (none) kernel:  hdc: hdc1
Oct 10 09:13:05 (none) last message repeated 2 times
Oct 10 09:13:05 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 09:13:05 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 09:13:05 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 09:13:05 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 09:13:05 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 09:13:05 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 09:13:07 (none) tdma: TDMA over serial setup
Oct 10 09:13:07 (none) apollo: Starting Apollo
Oct 10 09:13:07 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 09:13:08 (none) sntp-server: Starting SNTP server process 
Oct 10 09:13:09 (none) log_manager: System log manager running 
Oct 10 09:13:14 (none) nmxbus-mtu: using large MTU
Oct 10 09:13:14 (none) nmxbus-mtu: Done
Oct 10 09:13:15 (none) sntp-client: Starting SNTP client process 
Oct 10 09:13:16 (none) ntpd[339]: ntp engine ready
Oct 10 09:13:37 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 09:17:37 (none) apollo: Apollo stopped. (rc=0)
Oct 10 09:17:41 (none) exiting on signal 15
Oct 10 12:00:58 (none) syslogd 1.4.1: restart.
Oct 10 12:00:58 (none) syslog: Starting kernel logger... 
Oct 10 12:00:58 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 12:00:58 (none) kernel: Cannot find map file.
Oct 10 12:00:58 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 12:00:58 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 12:00:58 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 12:00:58 (none) kernel: On node 0 totalpages: 32768
Oct 10 12:00:58 (none) kernel: zone(0): 32768 pages.
Oct 10 12:00:58 (none) kernel: zone(1): 0 pages.
Oct 10 12:00:58 (none) kernel: zone(2): 0 pages.
Oct 10 12:00:58 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 12:00:58 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 12:00:58 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 12:00:58 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 12:00:58 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 12:00:58 (none) hostname: setting hostname to taurus_1908
Oct 10 12:00:58 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 12:00:59 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 12:00:59 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 12:00:59 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 12:00:59 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 12:00:59 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 12:00:59 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 12:00:59 (none) kernel: Initializing RT netlink socket
Oct 10 12:00:59 (none) kernel: Starting kswapd
Oct 10 12:00:59 (none) kernel: Journalled Block Device driver loaded
Oct 10 12:00:59 (none) serial1: start
Oct 10 12:00:59 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 12:00:59 (none) kernel: Probing for Epson LCD controller
Oct 10 12:00:59 (none) kernel: Epson S1D13A05 detected
Oct 10 12:00:59 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 12:01:00 (none) kernel: Console: switching to frame buffer device
Oct 10 12:01:00 (none) serial1: Setting serial port to raw mode
Oct 10 12:01:00 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 12:01:00 (none) serial1: port /dev/ttyS1
Oct 10 12:01:00 (none) kernel: CPM UART driver version 0.04
Oct 10 12:01:00 (none) serial1: speed 9600
Oct 10 12:01:00 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 12:01:00 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 12:01:00 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 12:01:00 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 12:01:00 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 12:01:00 (none) kernel: Taurus input driver version 0.1
Oct 10 12:01:00 (none) kernel: S1D13A05 IO
Oct 10 12:01:00 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 12:01:00 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 12:01:00 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 12:01:00 (none) serial2: start
Oct 10 12:01:00 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 12:01:01 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 12:01:01 (none) serial2: Setting serial port to raw mode
Oct 10 12:01:01 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 12:01:01 (none) serial2: port /dev/ttyS2
Oct 10 12:01:01 (none) kernel: SLIP linefill/keepalive option.
Oct 10 12:01:01 (none) serial2: speed 9600
Oct 10 12:01:01 (none) kernel: loop: loaded (max 8 devices)
Oct 10 12:01:01 (none) kernel: PPP generic driver version 2.4.2
Oct 10 12:01:01 (none) kernel: PPP Deflate Compression module registered
Oct 10 12:01:01 (none) kernel: PPP BSD Compression module registered
Oct 10 12:01:01 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 12:01:01 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 12:01:01 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 12:01:01 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 12:01:01 (none) network_common: start
Oct 10 12:01:01 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 12:01:02 (none) kernel:  Fixed Disk Card
Oct 10 12:01:02 (none) network_common: using static configuration for interface eth0...
Oct 10 12:01:02 (none) kernel:  IDE interface 
Oct 10 12:01:02 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 12:01:02 (none) kernel: Probing IDE interface ide0...
Oct 10 12:01:02 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 12:01:02 (none) kernel: Probing IDE interface ide1...
Oct 10 12:01:02 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 12:01:02 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 12:01:02 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 12:01:02 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 12:01:02 (none) kernel: hda: attached ide-disk driver.
Oct 10 12:01:03 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 12:01:03 (none) kernel: 
Oct 10 12:01:03 (none) kernel: hda: drive not ready for command
Oct 10 12:01:03 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 12:01:03 (none) kernel: hdc: attached ide-disk driver.
Oct 10 12:01:03 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 12:01:03 (none) kernel: Partition check:
Oct 10 12:01:03 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 12:01:03 (none) kernel: 
Oct 10 12:01:03 (none) kernel: hda: drive not ready for command
Oct 10 12:01:03 (none) kernel: hda: lost interrupt
Oct 10 12:01:03 (none) last message repeated 5 times
Oct 10 12:01:04 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 12:01:04 (none) kernel: hda: lost interrupt
Oct 10 12:01:04 (none) xinetd[160]: Started working: 3 available services
Oct 10 12:01:04 (none) kernel:  hda1
Oct 10 12:01:04 (none) kernel:  hdc: hdc1
Oct 10 12:01:04 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 12:01:04 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 12:01:04 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 12:01:04 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 12:01:04 (none) kernel: Using buffer write method
Oct 10 12:01:04 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 12:01:04 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 12:01:04 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 12:01:04 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 12:01:04 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 12:01:04 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 12:01:04 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 12:01:04 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 12:01:04 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 12:01:04 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 12:01:04 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 12:01:04 (none) kernel: Taurus ether LED driver V1.10
Oct 10 12:01:04 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 12:01:04 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 12:01:04 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 12:01:04 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 12:01:04 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 12:01:04 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 12:01:04 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 12:01:04 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 12:01:04 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 12:01:04 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 12:01:04 (none) kernel: 
Oct 10 12:01:04 (none) kernel: hda: drive not ready for command
Oct 10 12:01:04 (none) kernel: hda: lost interrupt
Oct 10 12:01:04 (none) last message repeated 6 times
Oct 10 12:01:05 (none) kernel:  hda1
Oct 10 12:01:05 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 12:01:05 (none) kernel: 
Oct 10 12:01:05 (none) kernel: hda: drive not ready for command
Oct 10 12:01:05 (none) kernel: hda: lost interrupt
Oct 10 12:01:05 (none) last message repeated 6 times
Oct 10 12:01:05 (none) kernel:  hda1
Oct 10 12:01:05 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 12:01:05 (none) kernel: 
Oct 10 12:01:05 (none) kernel: hda: drive not ready for command
Oct 10 12:01:05 (none) kernel: hda: lost interrupt
Oct 10 12:01:05 (none) kernel:  hdc: hdc1
Oct 10 12:01:05 (none) last message repeated 2 times
Oct 10 12:01:05 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 12:01:05 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 12:01:05 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 12:01:05 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 12:01:05 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 12:01:05 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 12:01:06 (none) tdma: TDMA over serial setup
Oct 10 12:01:07 (none) apollo: Starting Apollo
Oct 10 12:01:07 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 12:01:07 (none) sntp-server: Starting SNTP server process 
Oct 10 12:01:09 (none) log_manager: System log manager running 
Oct 10 12:01:14 (none) nmxbus-mtu: using large MTU
Oct 10 12:01:14 (none) nmxbus-mtu: Done
Oct 10 12:01:16 (none) sntp-client: Starting SNTP client process 
Oct 10 12:01:16 (none) ntpd[339]: ntp engine ready
Oct 10 12:01:46 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 12:05:40 (none) apollo: Apollo stopped. (rc=0)
Oct 10 12:05:44 (none) exiting on signal 15
Oct 10 14:50:58 (none) syslogd 1.4.1: restart.
Oct 10 14:50:58 (none) syslog: Starting kernel logger... 
Oct 10 14:50:58 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 14:50:58 (none) kernel: Cannot find map file.
Oct 10 14:50:58 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 14:50:58 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 14:50:58 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 14:50:58 (none) kernel: On node 0 totalpages: 32768
Oct 10 14:50:58 (none) kernel: zone(0): 32768 pages.
Oct 10 14:50:58 (none) kernel: zone(1): 0 pages.
Oct 10 14:50:58 (none) kernel: zone(2): 0 pages.
Oct 10 14:50:58 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 14:50:58 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 14:50:58 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 14:50:58 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 14:50:58 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 14:50:58 (none) hostname: setting hostname to taurus_1908
Oct 10 14:50:58 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 14:50:59 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 14:50:59 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 14:50:59 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 14:50:59 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 14:50:59 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 14:50:59 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 14:50:59 (none) kernel: Initializing RT netlink socket
Oct 10 14:50:59 (none) serial1: start
Oct 10 14:50:59 (none) kernel: Starting kswapd
Oct 10 14:50:59 (none) kernel: Journalled Block Device driver loaded
Oct 10 14:50:59 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 14:50:59 (none) kernel: Probing for Epson LCD controller
Oct 10 14:50:59 (none) kernel: Epson S1D13A05 detected
Oct 10 14:50:59 (none) serial1: Setting serial port to raw mode
Oct 10 14:50:59 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 14:50:59 (none) serial1: port /dev/ttyS1
Oct 10 14:50:59 (none) kernel: Console: switching to frame buffer device
Oct 10 14:50:59 (none) serial1: speed 9600
Oct 10 14:50:59 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 14:51:00 (none) kernel: CPM UART driver version 0.04
Oct 10 14:51:00 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 14:51:00 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 14:51:00 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 14:51:00 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 14:51:00 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 14:51:00 (none) serial2: start
Oct 10 14:51:00 (none) kernel: Taurus input driver version 0.1
Oct 10 14:51:00 (none) kernel: S1D13A05 IO
Oct 10 14:51:00 (none) serial2: Setting serial port to raw mode
Oct 10 14:51:00 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 14:51:00 (none) serial2: port /dev/ttyS2
Oct 10 14:51:00 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 14:51:01 (none) serial2: speed 9600
Oct 10 14:51:01 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 14:51:01 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 14:51:01 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 14:51:01 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 14:51:01 (none) network_common: start
Oct 10 14:51:01 (none) kernel: SLIP linefill/keepalive option.
Oct 10 14:51:01 (none) kernel: loop: loaded (max 8 devices)
Oct 10 14:51:01 (none) network_common: using static configuration for interface eth0...
Oct 10 14:51:01 (none) kernel: PPP generic driver version 2.4.2
Oct 10 14:51:01 (none) kernel: PPP Deflate Compression module registered
Oct 10 14:51:01 (none) kernel: PPP BSD Compression module registered
Oct 10 14:51:01 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 14:51:01 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 14:51:02 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 14:51:02 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 14:51:02 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 14:51:02 (none) kernel:  Fixed Disk Card
Oct 10 14:51:02 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 14:51:02 (none) kernel:  IDE interface 
Oct 10 14:51:02 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 14:51:02 (none) kernel: Probing IDE interface ide0...
Oct 10 14:51:02 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 14:51:02 (none) kernel: Probing IDE interface ide1...
Oct 10 14:51:02 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 14:51:03 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 14:51:03 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 14:51:03 (none) kernel: hda: attached ide-disk driver.
Oct 10 14:51:03 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 14:51:03 (none) kernel: 
Oct 10 14:51:03 (none) kernel: hda: drive not ready for command
Oct 10 14:51:03 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 14:51:03 (none) kernel: hdc: attached ide-disk driver.
Oct 10 14:51:03 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 14:51:03 (none) kernel: Partition check:
Oct 10 14:51:03 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 14:51:03 (none) kernel: 
Oct 10 14:51:03 (none) kernel: hda: drive not ready for command
Oct 10 14:51:03 (none) kernel: hda: lost interrupt
Oct 10 14:51:03 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 14:51:03 (none) kernel: hda: lost interrupt
Oct 10 14:51:03 (none) xinetd[160]: Started working: 3 available services
Oct 10 14:51:03 (none) kernel: hda: lost interrupt
Oct 10 14:51:03 (none) last message repeated 4 times
Oct 10 14:51:03 (none) kernel:  hda1
Oct 10 14:51:03 (none) kernel:  hdc: hdc1
Oct 10 14:51:03 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 14:51:03 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 14:51:03 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 14:51:04 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 14:51:04 (none) kernel: Using buffer write method
Oct 10 14:51:04 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 14:51:04 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 14:51:04 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 14:51:04 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 14:51:04 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 14:51:04 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 14:51:04 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 14:51:04 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 14:51:04 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 14:51:04 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 14:51:04 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 14:51:04 (none) kernel: Taurus ether LED driver V1.10
Oct 10 14:51:04 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 14:51:04 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 14:51:04 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 14:51:04 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 14:51:04 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 14:51:04 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 14:51:04 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 14:51:04 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 14:51:04 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 14:51:04 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 14:51:04 (none) kernel: 
Oct 10 14:51:04 (none) kernel: hda: drive not ready for command
Oct 10 14:51:04 (none) kernel: hda: lost interrupt
Oct 10 14:51:04 (none) last message repeated 6 times
Oct 10 14:51:04 (none) kernel:  hda1
Oct 10 14:51:04 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 14:51:04 (none) kernel: 
Oct 10 14:51:04 (none) kernel: hda: drive not ready for command
Oct 10 14:51:04 (none) kernel: hda: lost interrupt
Oct 10 14:51:05 (none) last message repeated 6 times
Oct 10 14:51:05 (none) kernel:  hda1
Oct 10 14:51:05 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 14:51:05 (none) kernel: 
Oct 10 14:51:05 (none) kernel: hda: drive not ready for command
Oct 10 14:51:05 (none) kernel: hda: lost interrupt
Oct 10 14:51:05 (none) kernel:  hdc: hdc1
Oct 10 14:51:05 (none) last message repeated 2 times
Oct 10 14:51:05 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 14:51:05 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 14:51:05 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 14:51:05 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 14:51:05 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 14:51:05 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 14:51:06 (none) tdma: TDMA over serial setup
Oct 10 14:51:07 (none) apollo: Starting Apollo
Oct 10 14:51:07 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 14:51:07 (none) sntp-server: Starting SNTP server process 
Oct 10 14:51:09 (none) log_manager: System log manager running 
Oct 10 14:51:14 (none) nmxbus-mtu: using large MTU
Oct 10 14:51:14 (none) nmxbus-mtu: Done
Oct 10 14:51:15 (none) sntp-client: Starting SNTP client process 
Oct 10 14:51:15 (none) ntpd[339]: ntp engine ready
Oct 10 14:51:38 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 14:55:34 (none) apollo: Apollo stopped. (rc=0)
Oct 10 14:55:38 (none) exiting on signal 15
Oct 10 17:40:13 (none) syslogd 1.4.1: restart.
Oct 10 17:40:13 (none) syslog: Starting kernel logger... 
Oct 10 17:40:13 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 17:40:13 (none) kernel: Cannot find map file.
Oct 10 17:40:13 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 17:40:13 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 17:40:13 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 17:40:13 (none) kernel: On node 0 totalpages: 32768
Oct 10 17:40:13 (none) kernel: zone(0): 32768 pages.
Oct 10 17:40:13 (none) kernel: zone(1): 0 pages.
Oct 10 17:40:13 (none) kernel: zone(2): 0 pages.
Oct 10 17:40:13 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 17:40:13 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 17:40:13 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 17:40:13 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 17:40:14 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 17:40:14 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 17:40:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 17:40:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 17:40:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 17:40:14 (none) hostname: setting hostname to taurus_1908
Oct 10 17:40:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 17:40:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 17:40:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 17:40:14 (none) kernel: Initializing RT netlink socket
Oct 10 17:40:14 (none) kernel: Starting kswapd
Oct 10 17:40:14 (none) kernel: Journalled Block Device driver loaded
Oct 10 17:40:14 (none) serial1: start
Oct 10 17:40:14 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 17:40:14 (none) kernel: Probing for Epson LCD controller
Oct 10 17:40:14 (none) kernel: Epson S1D13A05 detected
Oct 10 17:40:14 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 17:40:14 (none) serial1: Setting serial port to raw mode
Oct 10 17:40:15 (none) kernel: Console: switching to frame buffer device
Oct 10 17:40:15 (none) serial1: port /dev/ttyS1
Oct 10 17:40:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 17:40:15 (none) serial1: speed 9600
Oct 10 17:40:15 (none) kernel: CPM UART driver version 0.04
Oct 10 17:40:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 17:40:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 17:40:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 17:40:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 17:40:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 17:40:15 (none) kernel: Taurus input driver version 0.1
Oct 10 17:40:15 (none) kernel: S1D13A05 IO
Oct 10 17:40:15 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 17:40:15 (none) serial2: start
Oct 10 17:40:15 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 17:40:16 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 17:40:16 (none) serial2: Setting serial port to raw mode
Oct 10 17:40:16 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 17:40:16 (none) serial2: port /dev/ttyS2
Oct 10 17:40:16 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 17:40:16 (none) serial2: speed 9600
Oct 10 17:40:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 17:40:16 (none) kernel: SLIP linefill/keepalive option.
Oct 10 17:40:16 (none) kernel: loop: loaded (max 8 devices)
Oct 10 17:40:16 (none) kernel: PPP generic driver version 2.4.2
Oct 10 17:40:16 (none) kernel: PPP Deflate Compression module registered
Oct 10 17:40:16 (none) network_common: start
Oct 10 17:40:16 (none) kernel: PPP BSD Compression module registered
Oct 10 17:40:16 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 17:40:16 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 17:40:16 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 17:40:17 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 17:40:17 (none) network_common: using static configuration for interface eth0...
Oct 10 17:40:17 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 17:40:17 (none) kernel:  Fixed Disk Card
Oct 10 17:40:17 (none) kernel:  IDE interface 
Oct 10 17:40:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 17:40:17 (none) kernel: Probing IDE interface ide0...
Oct 10 17:40:17 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 17:40:17 (none) kernel: Probing IDE interface ide1...
Oct 10 17:40:17 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 17:40:17 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 17:40:17 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 17:40:18 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 17:40:18 (none) kernel: hda: attached ide-disk driver.
Oct 10 17:40:18 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 17:40:18 (none) kernel: 
Oct 10 17:40:18 (none) kernel: hda: drive not ready for command
Oct 10 17:40:18 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 17:40:18 (none) kernel: hdc: attached ide-disk driver.
Oct 10 17:40:18 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 17:40:18 (none) kernel: Partition check:
Oct 10 17:40:18 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 17:40:18 (none) kernel: 
Oct 10 17:40:18 (none) kernel: hda: drive not ready for command
Oct 10 17:40:18 (none) kernel: hda: lost interrupt
Oct 10 17:40:18 (none) last message repeated 4 times
Oct 10 17:40:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 17:40:19 (none) kernel: hda: lost interrupt
Oct 10 17:40:19 (none) xinetd[160]: Started working: 3 available services
Oct 10 17:40:19 (none) kernel: hda: lost interrupt
Oct 10 17:40:19 (none) kernel:  hda1
Oct 10 17:40:19 (none) kernel:  hdc: hdc1
Oct 10 17:40:19 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 17:40:19 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 17:40:19 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 17:40:19 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 17:40:19 (none) kernel: Using buffer write method
Oct 10 17:40:19 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 17:40:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 17:40:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 17:40:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 17:40:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 17:40:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 17:40:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 17:40:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 17:40:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 17:40:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 17:40:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 17:40:19 (none) kernel: Taurus ether LED driver V1.10
Oct 10 17:40:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 17:40:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 17:40:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 17:40:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 17:40:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 17:40:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 17:40:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 17:40:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 17:40:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 17:40:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 17:40:19 (none) kernel: 
Oct 10 17:40:19 (none) kernel: hda: drive not ready for command
Oct 10 17:40:19 (none) kernel: hda: lost interrupt
Oct 10 17:40:20 (none) last message repeated 6 times
Oct 10 17:40:20 (none) kernel:  hda1
Oct 10 17:40:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 17:40:20 (none) kernel: 
Oct 10 17:40:20 (none) kernel: hda: drive not ready for command
Oct 10 17:40:20 (none) kernel: hda: lost interrupt
Oct 10 17:40:20 (none) last message repeated 6 times
Oct 10 17:40:20 (none) kernel:  hda1
Oct 10 17:40:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 17:40:20 (none) kernel: 
Oct 10 17:40:20 (none) kernel: hda: drive not ready for command
Oct 10 17:40:20 (none) kernel: hda: lost interrupt
Oct 10 17:40:20 (none) kernel:  hdc: hdc1
Oct 10 17:40:20 (none) last message repeated 2 times
Oct 10 17:40:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 17:40:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 17:40:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 17:40:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 17:40:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 17:40:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 17:40:22 (none) tdma: TDMA over serial setup
Oct 10 17:40:22 (none) apollo: Starting Apollo
Oct 10 17:40:22 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 17:40:22 (none) sntp-server: Starting SNTP server process 
Oct 10 17:40:24 (none) log_manager: System log manager running 
Oct 10 17:40:29 (none) nmxbus-mtu: using large MTU
Oct 10 17:40:29 (none) nmxbus-mtu: Done
Oct 10 17:40:31 (none) sntp-client: Starting SNTP client process 
Oct 10 17:40:31 (none) ntpd[339]: ntp engine ready
Oct 10 17:41:02 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 17:44:54 (none) apollo: Apollo stopped. (rc=0)
Oct 10 17:44:58 (none) exiting on signal 15
Oct 10 20:26:13 (none) syslogd 1.4.1: restart.
Oct 10 20:26:13 (none) syslog: Starting kernel logger... 
Oct 10 20:26:14 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 20:26:14 (none) kernel: Cannot find map file.
Oct 10 20:26:14 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 20:26:14 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 20:26:14 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 20:26:14 (none) kernel: On node 0 totalpages: 32768
Oct 10 20:26:14 (none) kernel: zone(0): 32768 pages.
Oct 10 20:26:14 (none) kernel: zone(1): 0 pages.
Oct 10 20:26:14 (none) kernel: zone(2): 0 pages.
Oct 10 20:26:14 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 20:26:14 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 20:26:14 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 20:26:14 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 20:26:14 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 20:26:14 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 20:26:14 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 20:26:14 (none) hostname: setting hostname to taurus_1908
Oct 10 20:26:14 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 20:26:14 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 20:26:14 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 20:26:14 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 20:26:14 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 20:26:14 (none) serial1: start
Oct 10 20:26:14 (none) kernel: Initializing RT netlink socket
Oct 10 20:26:15 (none) kernel: Starting kswapd
Oct 10 20:26:15 (none) serial1: Setting serial port to raw mode
Oct 10 20:26:15 (none) kernel: Journalled Block Device driver loaded
Oct 10 20:26:15 (none) serial1: port /dev/ttyS1
Oct 10 20:26:15 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 20:26:15 (none) serial1: speed 9600
Oct 10 20:26:15 (none) kernel: Probing for Epson LCD controller
Oct 10 20:26:15 (none) kernel: Epson S1D13A05 detected
Oct 10 20:26:15 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 20:26:15 (none) kernel: Console: switching to frame buffer device
Oct 10 20:26:15 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 20:26:15 (none) kernel: CPM UART driver version 0.04
Oct 10 20:26:15 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 20:26:15 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 20:26:15 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 20:26:15 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 20:26:15 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 20:26:15 (none) kernel: Taurus input driver version 0.1
Oct 10 20:26:16 (none) kernel: S1D13A05 IO
Oct 10 20:26:16 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 20:26:16 (none) serial2: start
Oct 10 20:26:16 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 20:26:16 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 20:26:16 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 20:26:16 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 20:26:16 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 20:26:16 (none) serial2: Setting serial port to raw mode
Oct 10 20:26:16 (none) kernel: SLIP linefill/keepalive option.
Oct 10 20:26:16 (none) serial2: port /dev/ttyS2
Oct 10 20:26:16 (none) kernel: loop: loaded (max 8 devices)
Oct 10 20:26:16 (none) kernel: PPP generic driver version 2.4.2
Oct 10 20:26:16 (none) serial2: speed 9600
Oct 10 20:26:16 (none) kernel: PPP Deflate Compression module registered
Oct 10 20:26:16 (none) kernel: PPP BSD Compression module registered
Oct 10 20:26:16 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 20:26:16 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 20:26:16 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 20:26:16 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 20:26:17 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 20:26:17 (none) kernel:  Fixed Disk Card
Oct 10 20:26:17 (none) kernel:  IDE interface 
Oct 10 20:26:17 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 20:26:17 (none) kernel: Probing IDE interface ide0...
Oct 10 20:26:17 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 20:26:17 (none) kernel: Probing IDE interface ide1...
Oct 10 20:26:17 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 20:26:17 (none) network_common: start
Oct 10 20:26:17 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 20:26:17 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 20:26:17 (none) kernel: hda: attached ide-disk driver.
Oct 10 20:26:17 (none) network_common: using static configuration for interface eth0...
Oct 10 20:26:17 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 20:26:17 (none) kernel: 
Oct 10 20:26:17 (none) kernel: hda: drive not ready for command
Oct 10 20:26:17 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 20:26:17 (none) kernel: hdc: attached ide-disk driver.
Oct 10 20:26:17 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 20:26:18 (none) kernel: Partition check:
Oct 10 20:26:18 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 20:26:18 (none) kernel: 
Oct 10 20:26:18 (none) kernel: hda: drive not ready for command
Oct 10 20:26:18 (none) kernel: hda: lost interrupt
Oct 10 20:26:18 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 20:26:18 (none) kernel: hda: lost interrupt
Oct 10 20:26:18 (none) last message repeated 5 times
Oct 10 20:26:18 (none) kernel:  hda1
Oct 10 20:26:18 (none) kernel:  hdc: hdc1
Oct 10 20:26:18 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 20:26:18 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 20:26:19 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 20:26:19 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 20:26:19 (none) kernel: Using buffer write method
Oct 10 20:26:19 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 20:26:19 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 20:26:19 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 20:26:19 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 20:26:19 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 20:26:19 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 20:26:19 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 20:26:19 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 20:26:19 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 20:26:19 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 20:26:19 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 20:26:19 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 20:26:19 (none) kernel: Taurus ether LED driver V1.10
Oct 10 20:26:19 (none) xinetd[160]: Started working: 3 available services
Oct 10 20:26:19 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 20:26:19 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 20:26:19 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 20:26:19 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 20:26:19 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 20:26:19 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 20:26:19 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 20:26:19 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 20:26:19 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 20:26:19 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 20:26:19 (none) kernel: 
Oct 10 20:26:19 (none) kernel: hda: drive not ready for command
Oct 10 20:26:19 (none) kernel: hda: lost interrupt
Oct 10 20:26:20 (none) last message repeated 6 times
Oct 10 20:26:20 (none) kernel:  hda1
Oct 10 20:26:20 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 20:26:20 (none) kernel: 
Oct 10 20:26:20 (none) kernel: hda: drive not ready for command
Oct 10 20:26:20 (none) kernel: hda: lost interrupt
Oct 10 20:26:20 (none) last message repeated 6 times
Oct 10 20:26:20 (none) kernel:  hda1
Oct 10 20:26:20 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 20:26:20 (none) kernel: 
Oct 10 20:26:20 (none) kernel: hda: drive not ready for command
Oct 10 20:26:20 (none) kernel: hda: lost interrupt
Oct 10 20:26:20 (none) kernel:  hdc: hdc1
Oct 10 20:26:20 (none) last message repeated 2 times
Oct 10 20:26:20 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 20:26:20 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 20:26:20 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 20:26:20 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 20:26:20 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 20:26:20 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 20:26:22 (none) tdma: TDMA over serial setup
Oct 10 20:26:22 (none) apollo: Starting Apollo
Oct 10 20:26:23 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 20:26:23 (none) sntp-server: Starting SNTP server process 
Oct 10 20:26:25 (none) log_manager: System log manager running 
Oct 10 20:26:30 (none) nmxbus-mtu: using large MTU
Oct 10 20:26:30 (none) nmxbus-mtu: Done
Oct 10 20:26:31 (none) sntp-client: Starting SNTP client process 
Oct 10 20:26:32 (none) ntpd[339]: ntp engine ready
Oct 10 20:27:00 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 20:31:02 (none) apollo: Apollo stopped. (rc=0)
Oct 10 20:31:06 (none) exiting on signal 15
Oct 10 23:17:43 (none) syslogd 1.4.1: restart.
Oct 10 23:17:43 (none) syslog: Starting kernel logger... 
Oct 10 23:17:44 (none) kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 10 23:17:44 (none) kernel: Cannot find map file.
Oct 10 23:17:44 (none) kernel: No module symbols loaded - kernel modules not enabled. 
Oct 10 23:17:44 (none) kernel: cannot find any symbols, turning off symbol lookups 
Oct 10 23:17:44 (none) kernel: Linux version 2.4.24-NMX-TAURUS-1.4.8 (bentatham@cross.nanometrics.ca) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9)) #1 Fri Jul 8 10:35:48 EDT 2011
Oct 10 23:17:44 (none) kernel: On node 0 totalpages: 32768
Oct 10 23:17:44 (none) kernel: zone(0): 32768 pages.
Oct 10 23:17:44 (none) kernel: zone(1): 0 pages.
Oct 10 23:17:44 (none) kernel: zone(2): 0 pages.
Oct 10 23:17:44 (none) kernel: Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rw rootflags=noatime rootfstype=jffs2
Oct 10 23:17:44 (none) kernel: Decrementer Frequency = 249999960/60
Oct 10 23:17:44 (none) kernel: Calibrating delay loop... 66.35 BogoMIPS
Oct 10 23:17:44 (none) kernel: Memory: 127452k available (1524k kernel code, 436k data, 80k init, 0k highmem)
Oct 10 23:17:44 (none) kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 10 23:17:44 (none) hostname: setting hostname to taurus_1908
Oct 10 23:17:44 (none) kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Oct 10 23:17:44 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 10 23:17:44 (none) kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 10 23:17:44 (none) kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 10 23:17:44 (none) kernel: POSIX conformance testing by UNIFIX
Oct 10 23:17:44 (none) kernel: Linux NET4.0 for Linux 2.4
Oct 10 23:17:44 (none) kernel: Based upon Swansea University Computer Society NET3.039
Oct 10 23:17:44 (none) serial1: start
Oct 10 23:17:44 (none) kernel: Initializing RT netlink socket
Oct 10 23:17:44 (none) kernel: Starting kswapd
Oct 10 23:17:44 (none) kernel: Journalled Block Device driver loaded
Oct 10 23:17:45 (none) kernel: JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Oct 10 23:17:45 (none) kernel: Probing for Epson LCD controller
Oct 10 23:17:45 (none) serial1: Setting serial port to raw mode
Oct 10 23:17:45 (none) kernel: Epson S1D13A05 detected
Oct 10 23:17:45 (none) serial1: port /dev/ttyS1
Oct 10 23:17:45 (none) kernel: S1D13xxx: Display 240 x 320 8Bpp
Oct 10 23:17:45 (none) serial1: speed 9600
Oct 10 23:17:45 (none) kernel: Console: switching to frame buffer device
Oct 10 23:17:45 (none) kernel: S1D13xxx: fb0: s1d13xxx frame buffer device
Oct 10 23:17:45 (none) kernel: CPM UART driver version 0.04
Oct 10 23:17:45 (none) kernel: ttyS0 at 0x0280 is on SMC1 using BRG1
Oct 10 23:17:45 (none) kernel: ttyS1 at 0x0200 is on SCC3 using BRG2
Oct 10 23:17:45 (none) kernel: pty: 256 Unix98 ptys configured
Oct 10 23:17:45 (none) kernel: Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oct 10 23:17:45 (none) kernel: ttyS00 at 0xfaa00100 (irq = 10) is a TI16750
Oct 10 23:17:45 (none) serial2: start
Oct 10 23:17:45 (none) kernel: Taurus input driver version 0.1
Oct 10 23:17:46 (none) kernel: S1D13A05 IO
Oct 10 23:17:46 (none) kernel: Taurus scan keyboard driver V1.00
Oct 10 23:17:46 (none) kernel: nmx0: CPM HDLC Version 2.0 on SCC4, 15:59
Oct 10 23:17:46 (none) kernel: eth0: FEC ENET Version 0.3, FEC irq 3, with MDIO, addr 00:11:40:02:07:88
Oct 10 23:17:46 (none) kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 10 23:17:46 (none) serial2: Setting serial port to raw mode
Oct 10 23:17:46 (none) kernel: eth0: Phy @ 0x0, type BCM5241 (0x0143bc31)
Oct 10 23:17:46 (none) serial2: port /dev/ttyS2
Oct 10 23:17:46 (none) kernel: CSLIP: code copyright 1989 Regents of the University of California.
Oct 10 23:17:46 (none) serial2: speed 9600
Oct 10 23:17:46 (none) kernel: SLIP linefill/keepalive option.
Oct 10 23:17:46 (none) kernel: loop: loaded (max 8 devices)
Oct 10 23:17:46 (none) kernel: PPP generic driver version 2.4.2
Oct 10 23:17:46 (none) kernel: PPP Deflate Compression module registered
Oct 10 23:17:46 (none) kernel: PPP BSD Compression module registered
Oct 10 23:17:46 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Oct 10 23:17:46 (none) kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Oct 10 23:17:46 (none) kernel: IDE phys mem : fa400000...fa400200 (size 00000200)
Oct 10 23:17:46 (none) network_common: start
Oct 10 23:17:47 (none) kernel: PCMCIA slot A: phys mem e4000000...e0000200 (size fc000200)
Oct 10 23:17:47 (none) kernel: Card ID: SanDisk SDP 5/3 0.6
Oct 10 23:17:47 (none) kernel:  Fixed Disk Card
Oct 10 23:17:47 (none) kernel:  IDE interface 
Oct 10 23:17:47 (none) network_common: using static configuration for interface eth0...
Oct 10 23:17:47 (none) kernel:  [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Oct 10 23:17:47 (none) kernel: Probing IDE interface ide0...
Oct 10 23:17:47 (none) kernel: hda: SDCFXS-032G, CFA DISK drive
Oct 10 23:17:47 (none) kernel: Probing IDE interface ide1...
Oct 10 23:17:47 (none) kernel: hdc: SanDisk SDCFX3-008G, CFA DISK drive
Oct 10 23:17:47 (none) kernel: ide0 at 0x7a400000-0x7a400007,0x7a41000c on irq 8
Oct 10 23:17:47 (none) network_common: setting default route to interface eth0 w/o gateway: gateway is not set.
Oct 10 23:17:47 (none) kernel: ide1 at 0x64000000-0x64000007,0x6400000e on irq 13
Oct 10 23:17:48 (none) kernel: hda: attached ide-disk driver.
Oct 10 23:17:48 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 23:17:48 (none) kernel: 
Oct 10 23:17:48 (none) kernel: hda: drive not ready for command
Oct 10 23:17:48 (none) kernel: hda: 62537328 sectors (32019 MB) w/1KiB Cache, CHS=3892/255/63
Oct 10 23:17:48 (none) kernel: hdc: attached ide-disk driver.
Oct 10 23:17:48 (none) kernel: hdc: 16007040 sectors (8196 MB) w/1KiB Cache, CHS=15880/16/63
Oct 10 23:17:48 (none) kernel: Partition check:
Oct 10 23:17:48 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 23:17:48 (none) kernel: 
Oct 10 23:17:48 (none) kernel: hda: drive not ready for command
Oct 10 23:17:48 (none) kernel: hda: lost interrupt
Oct 10 23:17:49 (none) last message repeated 6 times
Oct 10 23:17:49 (none) xinetd[160]: xinetd Version 2.3.11 started with libwrap options compiled in.
Oct 10 23:17:49 (none) kernel:  hda1
Oct 10 23:17:49 (none) kernel:  hdc: hdc1
Oct 10 23:17:49 (none) kernel: SCSI subsystem driver Revision: 1.00
Oct 10 23:17:49 (none) kernel: NMX Taurus flash device: 64MB at 0xfc000000
Oct 10 23:17:49 (none) kernel: onboard flash bank 0: Found 2 x16 devices at 0x0 in 32-bit bank
Oct 10 23:17:49 (none) kernel:  Intel/Sharp Extended Query Table at 0x010A
Oct 10 23:17:49 (none) kernel: Using buffer write method
Oct 10 23:17:49 (none) kernel: cfi_cmdset_0001: Erase suspend on write enabled
Oct 10 23:17:49 (none) kernel: init_nmx_mtd: bank 0, name: onboard flash bank 0, size: 67108864 bytes
Oct 10 23:17:49 (none) kernel: NMX flash bank 0: Using static image partition definition
Oct 10 23:17:49 (none) xinetd[160]: Started working: 3 available services
Oct 10 23:17:49 (none) kernel: Creating 5 MTD partitions on "onboard flash bank 0":
Oct 10 23:17:49 (none) kernel: 0x00000000-0x00140000 : "kernel A"
Oct 10 23:17:49 (none) kernel: 0x00140000-0x00280000 : "kernel B"
Oct 10 23:17:49 (none) kernel: 0x00280000-0x03f00000 : "jffs2"
Oct 10 23:17:49 (none) kernel: 0x03f00000-0x03f40000 : "u-boot"
Oct 10 23:17:49 (none) kernel: 0x03f40000-0x04000000 : "spare"
Oct 10 23:17:49 (none) kernel: CPM SPI Driver: Revision: 0.1 David Ho(c)2004
Oct 10 23:17:49 (none) kernel: NMX sysctl interface V1.00 David Ho
Oct 10 23:17:49 (none) kernel: Taurus ether LED driver V1.10
Oct 10 23:17:49 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 10 23:17:49 (none) kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 10 23:17:49 (none) kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Oct 10 23:17:49 (none) kernel: TCP: Hash tables configured (established 8192 bind 16384)
Oct 10 23:17:49 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 10 23:17:49 (none) kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Oct 10 23:17:49 (none) kernel: All bugs added by David S. Miller <davem@redhat.com>
Oct 10 23:17:49 (none) kernel: VFS: Mounted root (jffs2 filesystem).
Oct 10 23:17:49 (none) kernel: Freeing unused kernel memory: 80k init
Oct 10 23:17:49 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 23:17:49 (none) kernel: 
Oct 10 23:17:49 (none) kernel: hda: drive not ready for command
Oct 10 23:17:49 (none) kernel: hda: lost interrupt
Oct 10 23:17:50 (none) last message repeated 6 times
Oct 10 23:17:50 (none) kernel:  hda1
Oct 10 23:17:50 (none) kernel:  hda:hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 23:17:50 (none) kernel: 
Oct 10 23:17:50 (none) kernel: hda: drive not ready for command
Oct 10 23:17:50 (none) kernel: hda: lost interrupt
Oct 10 23:17:50 (none) last message repeated 6 times
Oct 10 23:17:50 (none) kernel:  hda1
Oct 10 23:17:50 (none) kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 10 23:17:50 (none) kernel: 
Oct 10 23:17:50 (none) kernel: hda: drive not ready for command
Oct 10 23:17:50 (none) kernel: hda: lost interrupt
Oct 10 23:17:50 (none) kernel:  hdc: hdc1
Oct 10 23:17:50 (none) last message repeated 2 times
Oct 10 23:17:50 (none) kernel: kjournald starting.  Commit interval 5 seconds
Oct 10 23:17:50 (none) kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 10 23:17:50 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Oct 10 23:17:50 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 10 23:17:50 (none) kernel: eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Oct 10 23:17:50 (none) kernel: FEC: enabling auto power-down mode of BCM5241 PHY
Oct 10 23:17:52 (none) tdma: TDMA over serial setup
Oct 10 23:17:52 (none) apollo: Starting Apollo
Oct 10 23:17:52 (none) nmxbus-mtu: Setting nmxbus MTU...
Oct 10 23:17:53 (none) sntp-server: Starting SNTP server process 
Oct 10 23:17:55 (none) log_manager: System log manager running 
Oct 10 23:18:00 (none) nmxbus-mtu: using large MTU
Oct 10 23:18:00 (none) nmxbus-mtu: Done
Oct 10 23:18:01 (none) sntp-client: Starting SNTP client process 
Oct 10 23:18:01 (none) ntpd[339]: ntp engine ready
Oct 10 23:18:27 (none) ntpd[339]: peer 1.0.0.2 now valid
Oct 10 23:22:24 (none) apollo: Apollo stopped. (rc=0)
Oct 10 23:22:28 (none) exiting on signal 15