[0001-01-01 00:00:00][1] Simulation start time 2015-09-07T16:36:41.646708Z
[0001-01-01 00:00:00][2] Using simulation file `/home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/simulations/Hayward_Grapenthin_etal_JGR_2014.xml'
..... [ Debug (MainProcess,MainThread,<module>,L134) ] [0001-01-01 00:00:00][3] Config File set on command line /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/config/Hayward_Grapenthin_etal_JGR_2014_2873.cfg
[0001-01-01 00:00:00][4] Replaying FROM 2013-09-05T04:17:16.000000Z TO 2013-09-05T04:24:16.000000Z
..... [ Debug (MainProcess,MainThread,config,L212) ] [0001-01-01 00:00:00][5] Using config file: /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/config/Hayward_Grapenthin_etal_JGR_2014_2873.cfg
..... [ Debug (MainProcess,MainThread,__init__,L61) ] [0001-01-01 00:00:00][6] config file: /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/config/Hayward_Grapenthin_etal_JGR_2014_2873.cfg
..... [ Debug (MainProcess,MainThread,__init__,L71) ] [0001-01-01 00:00:00][7] spec file: /home/glarms/config/G-larmS.spec
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][8] Setting default 'GLARMS_ROOT' = '/home/glarms/src/glarms' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][9] Setting default 'GPS_SITE_DB' = '%(GLARMS_ROOT)s/config/sites.list' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][10] Setting default 'LOG_DIR' = '/home/glarms/src/glarms/testcases' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][11] Setting default 'GMT_DIR' = '/home/glarms/src/glarms/GMT' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][12] Setting default 'OFFSET_LOG_DIR' = '%(LOG_DIR)s/<EVENT_ID>/offset_logs' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][13] Setting default 'MODEL_LOG_DIR' = '%(LOG_DIR)s/<EVENT_ID>/model_logs' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][14] Setting default 'MODEL_GMT_LOG_DIR' = '%(LOG_DIR)s/<EVENT_ID>/plot' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][15] Setting default 'STATS_DIR' = '%(LOG_DIR)s/stats' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][16] Setting default 'PLOT_SCRIPTS_DIR' = '/home/glarms/src/glarms/plot_scripts' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][17] Setting default 'SIMULATION_DIR' = '%(LOG_DIR)s/<EVENT_ID>/simulations' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][18] Setting default 'FAULT_DB_FILE' = '%(GLARMS_ROOT)s/config/FaultPolygons.xml' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][19] Setting default 'MOVIE_DEST_DIR' = '%(LOG_DIR)s/<EVENT_ID>/movie' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][20] Setting default 'RPP_CONF' = '%(LOG_DIR)s/stats' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][21] Setting default 'WORK_DIR' = '/tmp/glarms_xxxx' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][22] Setting default 'PY4J_RT_CALLBACK_PORT' = '[20004, 20005]' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][23] Setting default 'PY4J_RPP_CALLBACK_PORT' = '21116' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][24] Setting default 'PY4J_PE_CALLBACK_PORT' = '21117' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][25] Setting default 'PY4J_RT_JAVA_PORT' = '[30004, 30005]' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][26] Setting default 'PY4J_RPP_JAVA_PORT' = '31116' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][27] Setting default 'PY4J_PE_JAVA_PORT' = '31117' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][28] Setting default 'TRACKRT_FILE_SUFFIX' = '.LCPC' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][29] Setting default 'TRACKRT_FILE_LINE_LEN' = '173' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][30] Setting default 'TRACKRT_FILE_CURRENT_DIR' = '/data/arthur1/bardpro/TrackRT_results/pos_files' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][31] Setting default 'TRACKRT_FILE_ARCHIVE_DIR' = '/home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][32] Setting default 'TRACKRT_SOCKET_HOST' = 'arthur.geo.berkeley.edu' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][33] Setting default 'TRACKRT_SOCKET_PORT' = '2101' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][34] Setting default 'TRACKRT_SOCKET_USER' = 'glarms' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][35] Setting default 'TRACKRT_SOCKET_PASSWORD' = 'bsl_t3st' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][36] Setting default 'TRACKRT_SOCKET_ATTEMPTS' = '10' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][37] Setting default 'STD_THRESH' = '25' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][38] Setting default 'STD_V_THRESH' = '50' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][39] Setting default 'RMS_THRESH' = '25' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][40] Setting default 'SIGMA_THRESH' = '25' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][41] Setting default 'SIGMA_V_THRESH' = '49' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][42] Setting default 'SEND_MSG_THRESH' = '2.5' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][43] Setting default 'PLOT' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][44] Setting default 'SIM' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][45] Setting default 'REPLAY' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][46] Setting default 'DUMP' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][47] Setting default 'NO_NOISE' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][48] Setting default 'DUMP_DISPLACEMENTS' = 'True' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][49] Setting default 'MAKE_MOVIE' = 'True' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][50] Setting default 'BUFF_SIZE' = '300' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][51] Setting default 'OFFSET_INVERTER_MODEL_WRITE_DELAY' = '1.0' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][52] Setting default 'OFFSET_INVERTER_TIMEOUT_FACTOR' = '0.35' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][53] Setting default 'OFFSET_INVERTER_NUM_PATCHES' = '5' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][54] Setting default 'OFFSET_INVERTER_PATCH_LENGTH' = '10 km' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][55] Setting default 'MODEL_PUBLISH_INTERVAL' = '0:05:00' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][56] Setting default 'OFFSET_EST_INSTANCE' = '0' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][57] Setting default 'TRACKRT_OUTFILE_INTERVAL' = '6' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][58] Setting default 'TRACKRT_FILE_WAIT' = '30' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][59] Setting default 'GPS_ENGINE_TRACKRT_ASCII' = 'trackRT_ASCII' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][60] Setting default 'GPS_ENGINE_TRACKRT_SOCKET' = 'trackRT_socket' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][61] Setting default 'REPLAY_FROM' = 'None' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][62] Setting default 'REPLAY_TO' = 'None' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][63] Setting default 'REPLAY_TIME' = '2015-09-07 16:36:41.382184' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][64] Setting default 'REPLAY_BRAKE' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][65] Setting default 'REPLAY_SLEEP' = '0.15' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][66] Setting default 'MIN_TIME' = '0001-01-01 00:00:00' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][67] Setting default 'MAX_TIME' = '9999-12-31 00:00:00' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][68] Setting default 'READ_TIME' = '0001-01-01 00:00:00' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][69] Setting default 'PLOT_DELAY' = '10' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][70] Setting default 'RT_SLEEP' = '0 s' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][71] Setting default 'RT_WAIT' = 'min' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][72] Setting default 'RT_OFFSET_SAMPLES' = '300' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][73] Setting default 'MODEL_WRITER' = 'dm,gmt,ascii' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][74] Setting default 'ORIG_SYS_NAME' = 'glarms' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][75] Setting default 'CONNECT_WAIT_FACTOR' = '2' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][76] Setting default 'SKIP_OFFSET_LINES' = '31' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][77] Setting default 'RPP_SCRIPTS_DIR' = '/data/bard2/RealTime/scripts/RPP_scripts' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][78] Setting default 'RPP_EXEC_DIR' = '/data/bard2/RealTime/RPP' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][79] Setting default 'RPP_DISTANCE_THRESHOLD' = '1000 km' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][80] Setting default 'RPP_S_WAVE_VEL' = '3.0 km/s' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][81] Setting default 'RPP_SLEEP' = '60 s' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][82] Setting default 'RPP_SLEEP_LATE_UPDATE' = '300 s' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][83] Setting default 'USE_TEST_EVENT' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][84] Setting default 'TEST_EVENT_FILE' = 'test/loma_prieta.xml' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][85] Setting default 'TEST_EVENT_TIME' = 'None' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][86] Setting default 'TEST_MSG_SENT' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][87] Setting default 'SEND_TEST_XML' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][88] Setting default 'simulator' = 'None' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][89] Setting default 'PE_METHOD' = 'colombelli' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][90] Setting default 'PE_METHOD_LIST' = '['colombelli', 'point_source']' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][91] Setting default 'OFFSET_WRITER' = 'ascii' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][92] Setting default 'OFFSET_READER' = 'ascii' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][93] Setting default 'OFFSET_READER_TIMEOUT' = '360' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][94] Setting default 'OFFSET_FLATLINE_FILTER' = 'False' ...
..... [ Debug (MainProcess,MainThread,setup,L127) ] [0001-01-01 00:00:00][95] Setting default 'TIME_FORMAT' = '%Y-%m-%dT%H:%M:%S.%fZ' ...
..... [ Debug (MainProcess,MainThread,validate,L144) ] [0001-01-01 00:00:00][96] Validating config using spec file 'G-larmS.spec' ...
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][97] Interpolating GLARMS_ROOT = /home/glarms/src/glarms
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][98] Interpolating LOG_DIR = /home/glarms/src/glarms/testcases
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][99] Interpolating GMT_DIR = /home/glarms/src/glarms/GMT
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][100] Interpolating PLOT_SCRIPTS_DIR = /home/glarms/src/glarms/plot_scripts
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][101] Interpolating TRACKRT_SOCKET_USER = glarms
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][102] Interpolating TRACKRT_SOCKET_PASSWORD = bsl_t3st
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][103] Interpolating SEND_TEST_XML = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][104] Interpolating SEND_MSG_THRESH = 2.5
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][105] Interpolating CONNECT_WAIT_FACTOR = 2
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][106] Interpolating MAKE_MOVIE = True
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][107] Interpolating TRACKRT_FILE_ARCHIVE_DIR = /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][108] Interpolating SKIP_OFFSET_LINES = 31
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][109] Interpolating OFFSET_FLATLINE_FILTER = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][110] Interpolating GPS_SITE_DB = /home/glarms/src/glarms/config/sites.list
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][111] Interpolating OFFSET_LOG_DIR = /home/glarms/src/glarms/testcases/<EVENT_ID>/offset_logs
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][112] Interpolating MODEL_LOG_DIR = /home/glarms/src/glarms/testcases/<EVENT_ID>/model_logs
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][113] Interpolating MODEL_GMT_LOG_DIR = /home/glarms/src/glarms/testcases/<EVENT_ID>/plot
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][114] Interpolating STATS_DIR = /home/glarms/src/glarms/testcases/stats
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][115] Interpolating SIMULATION_DIR = /home/glarms/src/glarms/testcases/<EVENT_ID>/simulations
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][116] Interpolating FAULT_DB_FILE = /home/glarms/src/glarms/config/FaultPolygons.xml
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][117] Interpolating MOVIE_DEST_DIR = /home/glarms/src/glarms/testcases/<EVENT_ID>/movie
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][118] Interpolating RPP_CONF = /home/glarms/src/glarms/testcases/stats
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][119] Interpolating WORK_DIR = /tmp/glarms_xxxx
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][120] Interpolating PY4J_RT_CALLBACK_PORT = [20004, 20005]
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][121] Interpolating PY4J_RPP_CALLBACK_PORT = 21116
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][122] Interpolating PY4J_PE_CALLBACK_PORT = 21117
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][123] Interpolating PY4J_RT_JAVA_PORT = [30004, 30005]
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][124] Interpolating PY4J_RPP_JAVA_PORT = 31116
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][125] Interpolating PY4J_PE_JAVA_PORT = 31117
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][126] Interpolating TRACKRT_FILE_SUFFIX = .LCPC
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][127] Interpolating TRACKRT_FILE_LINE_LEN = 173
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][128] Interpolating TRACKRT_FILE_CURRENT_DIR = /data/arthur1/bardpro/TrackRT_results/pos_files
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][129] Interpolating TRACKRT_SOCKET_HOST = arthur.geo.berkeley.edu
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][130] Interpolating TRACKRT_SOCKET_PORT = 2101
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][131] Interpolating TRACKRT_SOCKET_ATTEMPTS = 10
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][132] Interpolating STD_THRESH = 25
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][133] Interpolating STD_V_THRESH = 50
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][134] Interpolating RMS_THRESH = 25
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][135] Interpolating SIGMA_THRESH = 25
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][136] Interpolating SIGMA_V_THRESH = 49
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][137] Interpolating PLOT = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][138] Interpolating SIM = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][139] Interpolating REPLAY = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][140] Interpolating DUMP = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][141] Interpolating NO_NOISE = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][142] Interpolating DUMP_DISPLACEMENTS = True
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][143] Interpolating BUFF_SIZE = 300
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][144] Interpolating OFFSET_INVERTER_MODEL_WRITE_DELAY = 1.0
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][145] Interpolating OFFSET_INVERTER_TIMEOUT_FACTOR = 0.35
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][146] Interpolating OFFSET_INVERTER_NUM_PATCHES = 5
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][147] Interpolating OFFSET_INVERTER_PATCH_LENGTH = 10 km
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][148] Interpolating MODEL_PUBLISH_INTERVAL = 0:05:00
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][149] Interpolating OFFSET_EST_INSTANCE = 0
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][150] Interpolating TRACKRT_OUTFILE_INTERVAL = 6
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][151] Interpolating TRACKRT_FILE_WAIT = 30
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][152] Interpolating GPS_ENGINE_TRACKRT_ASCII = trackRT_ASCII
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][153] Interpolating GPS_ENGINE_TRACKRT_SOCKET = trackRT_socket
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][154] Interpolating REPLAY_FROM = None
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][155] Interpolating REPLAY_TO = None
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][156] Interpolating REPLAY_TIME = 2015-09-07 16:36:41.382184
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][157] Interpolating REPLAY_BRAKE = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][158] Interpolating REPLAY_SLEEP = 0.15
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][159] Interpolating MIN_TIME = 0001-01-01 00:00:00
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][160] Interpolating MAX_TIME = 9999-12-31 00:00:00
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][161] Interpolating READ_TIME = 0001-01-01 00:00:00
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][162] Interpolating PLOT_DELAY = 10
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][163] Interpolating RT_SLEEP = 0 s
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][164] Interpolating RT_WAIT = min
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][165] Interpolating RT_OFFSET_SAMPLES = 300
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][166] Interpolating MODEL_WRITER = dm,gmt,ascii
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][167] Interpolating ORIG_SYS_NAME = glarms
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][168] Interpolating RPP_SCRIPTS_DIR = /data/bard2/RealTime/scripts/RPP_scripts
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][169] Interpolating RPP_EXEC_DIR = /data/bard2/RealTime/RPP
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][170] Interpolating RPP_DISTANCE_THRESHOLD = 1000 km
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][171] Interpolating RPP_S_WAVE_VEL = 3.0 km/s
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][172] Interpolating RPP_SLEEP = 60 s
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][173] Interpolating RPP_SLEEP_LATE_UPDATE = 300 s
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][174] Interpolating USE_TEST_EVENT = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][175] Interpolating TEST_EVENT_FILE = test/loma_prieta.xml
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][176] Interpolating TEST_EVENT_TIME = None
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][177] Interpolating TEST_MSG_SENT = False
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][178] Interpolating simulator = None
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][179] Interpolating PE_METHOD = colombelli
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][180] Interpolating PE_METHOD_LIST = ['colombelli', 'point_source']
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][181] Interpolating OFFSET_WRITER = ascii
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][182] Interpolating OFFSET_READER = ascii
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][183] Interpolating OFFSET_READER_TIMEOUT = 360
..... [ Debug (MainProcess,MainThread,config,L359) ] [0001-01-01 00:00:00][184] Interpolating TIME_FORMAT = %Y-%m-%dT%H:%M:%S.%fZ
..... [ Debug (MainProcess,MainThread,check,L376) ] [0001-01-01 00:00:00][185] Checking config parameters ...
[0001-01-01 00:00:00][186] Updated MODEL_PUBLISH_INTERVAL = 0:07:00 for replay mode
..... [ Debug (MainProcess,MainThread,check,L394) ] [0001-01-01 00:00:00][187] I am instance 0, callback port: 20004, Java Port: 30004
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][188] key=P268-PTRO
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][189] key=P248-PTRO
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][190] key=P256-PTRO
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][191] key=P262-PTRO
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][192] key=SCCP-P229
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][193] key=ROCP-P229
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][194] key=P225-P229
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][195] key=P222-SCCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][196] key=P225-SCCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][197] key=P223-SCCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][198] key=BRIB-ROCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][199] key=P225-ROCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][200] key=P224-ROCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][201] key=P223-ROCP
..... [ Debug (MainProcess,MainThread,get_channel_list,L222) ] [0001-01-01 00:00:00][202] key=P178-P222
[0001-01-01 00:00:00][203] GPS_station: Found P268 with LAT=38.473526, LON=-121.646411, HEIGHT=-1.000000
[0001-01-01 00:00:00][204] GPS_station: Found PTRO with LAT=38.209500, LON=-121.944200, HEIGHT=-1.000000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [0001-01-01 00:00:00][205] creating ASCII reader for P268-PTRO
[0001-01-01 00:00:00][206] P268-PTRO: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [0001-01-01 00:00:00][207] P268-PTRO: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P268_PTRO.DHU.P268.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P268_PTRO.DHU.P268.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [0001-01-01 00:00:00][208] P268-PTRO:Unpacking P268-PTRO...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [0001-01-01 00:00:00][209]  gunzip -f ['/tmp/glarms_XLh7Km/P268_PTRO.DHU.P268.20130905_0000.LCPC.gz']
[0001-01-01 00:00:00][210] P268-PTRO: working on file /tmp/glarms_XLh7Km/P268_PTRO.DHU.P268.20130905_0000.LCPC
[0001-01-01 00:00:00][211] P268-PTRO: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P268_PTRO.DHU.P268.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [0001-01-01 00:00:00][212] P268-PTRO: idx_from=15083 idx_to=15383
[2013-09-05 04:17:15][213] P268-PTRO: filled 0 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][214] Adding listener for P268-PTRO ...
[2013-09-05 04:17:15][215] GPS_station: Found P248 with LAT=37.975604, LON=-121.868682, HEIGHT=-1.000000
[2013-09-05 04:17:15][216] GPS_station: Found PTRO with LAT=38.209500, LON=-121.944200, HEIGHT=-1.000000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][217] creating ASCII reader for P248-PTRO
[2013-09-05 04:17:15][218] P248-PTRO: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][219] P248-PTRO: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P248_PTRO.DHU.P248.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P248_PTRO.DHU.P248.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][220] P248-PTRO:Unpacking P248-PTRO...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][221]  gunzip -f ['/tmp/glarms_XLh7Km/P248_PTRO.DHU.P248.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][222] P248-PTRO: working on file /tmp/glarms_XLh7Km/P248_PTRO.DHU.P248.20130905_0000.LCPC
[2013-09-05 04:17:15][223] P248-PTRO: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P248_PTRO.DHU.P248.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][224] P248-PTRO: idx_from=15058 idx_to=15358
[2013-09-05 04:17:15][225] P248-PTRO: filled 0 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][226] Adding listener for P248-PTRO ...
[2013-09-05 04:17:15][227] GPS_station: Found P256 with LAT=37.931964, LON=-121.604839, HEIGHT=-1.000000
[2013-09-05 04:17:15][228] GPS_station: Found PTRO with LAT=38.209500, LON=-121.944200, HEIGHT=-1.000000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][229] creating ASCII reader for P256-PTRO
[2013-09-05 04:17:15][230] P256-PTRO: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][231] P256-PTRO: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P256_PTRO.DHU.P256.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P256_PTRO.DHU.P256.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][232] P256-PTRO:Unpacking P256-PTRO...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][233]  gunzip -f ['/tmp/glarms_XLh7Km/P256_PTRO.DHU.P256.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][234] P256-PTRO: working on file /tmp/glarms_XLh7Km/P256_PTRO.DHU.P256.20130905_0000.LCPC
[2013-09-05 04:17:15][235] P256-PTRO: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P256_PTRO.DHU.P256.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][236] P256-PTRO: idx_from=15082 idx_to=15382
[2013-09-05 04:17:15][237] P256-PTRO: filled 0 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][238] Adding listener for P256-PTRO ...
[2013-09-05 04:17:15][239] GPS_station: Found P262 with LAT=38.025148, LON=-122.096143, HEIGHT=-1.000000
[2013-09-05 04:17:15][240] GPS_station: Found PTRO with LAT=38.209500, LON=-121.944200, HEIGHT=-1.000000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][241] creating ASCII reader for P262-PTRO
[2013-09-05 04:17:15][242] P262-PTRO: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][243] P262-PTRO: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P262_PTRO.DHU.P262.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P262_PTRO.DHU.P262.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][244] P262-PTRO:Unpacking P262-PTRO...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][245]  gunzip -f ['/tmp/glarms_XLh7Km/P262_PTRO.DHU.P262.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][246] P262-PTRO: working on file /tmp/glarms_XLh7Km/P262_PTRO.DHU.P262.20130905_0000.LCPC
[2013-09-05 04:17:15][247] P262-PTRO: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P262_PTRO.DHU.P262.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][248] P262-PTRO: idx_from=14907 idx_to=15204
[2013-09-05 04:17:15][249] P262-PTRO: filled 3 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][250] Adding listener for P262-PTRO ...
[2013-09-05 04:17:15][251] GPS_station: Found SCCP with LAT=37.651800, LON=-122.002100, HEIGHT=416.900000
[2013-09-05 04:17:15][252] GPS_station: Found P229 with LAT=37.749435, LON=-121.977955, HEIGHT=289.333800
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][253] creating ASCII reader for SCCP-P229
[2013-09-05 04:17:15][254] SCCP-P229: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][255] SCCP-P229: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/SCCP_P229.DHU.SCCP.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/SCCP_P229.DHU.SCCP.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][256] SCCP-P229:Unpacking SCCP-P229...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][257]  gunzip -f ['/tmp/glarms_XLh7Km/SCCP_P229.DHU.SCCP.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][258] SCCP-P229: working on file /tmp/glarms_XLh7Km/SCCP_P229.DHU.SCCP.20130905_0000.LCPC
[2013-09-05 04:17:15][259] SCCP-P229: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/SCCP_P229.DHU.SCCP.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][260] SCCP-P229: idx_from=14222 idx_to=14510
[2013-09-05 04:17:15][261] SCCP-P229: filled 12 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][262] Adding listener for SCCP-P229 ...
[2013-09-05 04:17:15][263] GPS_station: Found ROCP with LAT=37.781600, LON=-122.062900, HEIGHT=582.300000
[2013-09-05 04:17:15][264] GPS_station: Found P229 with LAT=37.749435, LON=-121.977955, HEIGHT=289.333800
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][265] creating ASCII reader for ROCP-P229
[2013-09-05 04:17:15][266] ROCP-P229: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][267] ROCP-P229: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/ROCP_P229.DHU.ROCP.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/ROCP_P229.DHU.ROCP.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][268] ROCP-P229:Unpacking ROCP-P229...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][269]  gunzip -f ['/tmp/glarms_XLh7Km/ROCP_P229.DHU.ROCP.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][270] ROCP-P229: working on file /tmp/glarms_XLh7Km/ROCP_P229.DHU.ROCP.20130905_0000.LCPC
[2013-09-05 04:17:15][271] ROCP-P229: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/ROCP_P229.DHU.ROCP.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][272] ROCP-P229: idx_from=14259 idx_to=14540
[2013-09-05 04:17:15][273] ROCP-P229: filled 19 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][274] Adding listener for ROCP-P229 ...
[2013-09-05 04:17:15][275] GPS_station: Found P225 with LAT=37.713865, LON=-122.058327, HEIGHT=-1.000000
[2013-09-05 04:17:15][276] GPS_station: Found P229 with LAT=37.749435, LON=-121.977955, HEIGHT=289.333800
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][277] creating ASCII reader for P225-P229
[2013-09-05 04:17:15][278] P225-P229: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][279] P225-P229: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P225_P229.DHU.P225.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P225_P229.DHU.P225.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][280] P225-P229:Unpacking P225-P229...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][281]  gunzip -f ['/tmp/glarms_XLh7Km/P225_P229.DHU.P225.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][282] P225-P229: working on file /tmp/glarms_XLh7Km/P225_P229.DHU.P225.20130905_0000.LCPC
[2013-09-05 04:17:15][283] P225-P229: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P225_P229.DHU.P225.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][284] P225-P229: idx_from=14234 idx_to=14516
[2013-09-05 04:17:15][285] P225-P229: filled 18 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][286] Adding listener for P225-P229 ...
[2013-09-05 04:17:15][287] GPS_station: Found P222 with LAT=37.539239, LON=-122.083263, HEIGHT=53.495900
[2013-09-05 04:17:15][288] GPS_station: Found SCCP with LAT=37.651800, LON=-122.002100, HEIGHT=416.900000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][289] creating ASCII reader for P222-SCCP
[2013-09-05 04:17:15][290] P222-SCCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][291] P222-SCCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P222_SCCP.DHU.P222.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P222_SCCP.DHU.P222.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][292] P222-SCCP:Unpacking P222-SCCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][293]  gunzip -f ['/tmp/glarms_XLh7Km/P222_SCCP.DHU.P222.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][294] P222-SCCP: working on file /tmp/glarms_XLh7Km/P222_SCCP.DHU.P222.20130905_0000.LCPC
[2013-09-05 04:17:15][295] P222-SCCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P222_SCCP.DHU.P222.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][296] P222-SCCP: idx_from=14855 idx_to=15155
[2013-09-05 04:17:15][297] P222-SCCP: filled 0 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][298] Adding listener for P222-SCCP ...
[2013-09-05 04:17:15][299] GPS_station: Found P225 with LAT=37.713865, LON=-122.058327, HEIGHT=-1.000000
[2013-09-05 04:17:15][300] GPS_station: Found SCCP with LAT=37.651800, LON=-122.002100, HEIGHT=416.900000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][301] creating ASCII reader for P225-SCCP
[2013-09-05 04:17:15][302] P225-SCCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][303] P225-SCCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P225_SCCP.DHU.P225.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P225_SCCP.DHU.P225.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][304] P225-SCCP:Unpacking P225-SCCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][305]  gunzip -f ['/tmp/glarms_XLh7Km/P225_SCCP.DHU.P225.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][306] P225-SCCP: working on file /tmp/glarms_XLh7Km/P225_SCCP.DHU.P225.20130905_0000.LCPC
[2013-09-05 04:17:15][307] P225-SCCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P225_SCCP.DHU.P225.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][308] P225-SCCP: idx_from=14871 idx_to=15170
[2013-09-05 04:17:15][309] P225-SCCP: filled 1 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][310] Adding listener for P225-SCCP ...
[2013-09-05 04:17:15][311] GPS_station: Found P223 with LAT=37.722050, LON=-122.099760, HEIGHT=-1.000000
[2013-09-05 04:17:15][312] GPS_station: Found SCCP with LAT=37.651800, LON=-122.002100, HEIGHT=416.900000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][313] creating ASCII reader for P223-SCCP
[2013-09-05 04:17:15][314] P223-SCCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][315] P223-SCCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P223_SCCP.DHU.P223.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P223_SCCP.DHU.P223.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][316] P223-SCCP:Unpacking P223-SCCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][317]  gunzip -f ['/tmp/glarms_XLh7Km/P223_SCCP.DHU.P223.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][318] P223-SCCP: working on file /tmp/glarms_XLh7Km/P223_SCCP.DHU.P223.20130905_0000.LCPC
[2013-09-05 04:17:15][319] P223-SCCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P223_SCCP.DHU.P223.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][320] P223-SCCP: idx_from=14914 idx_to=15214
[2013-09-05 04:17:15][321] P223-SCCP: filled 0 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][322] Adding listener for P223-SCCP ...
[2013-09-05 04:17:15][323] GPS_station: Found BRIB with LAT=37.919400, LON=-122.152600, HEIGHT=-1.000000
[2013-09-05 04:17:15][324] GPS_station: Found ROCP with LAT=37.781600, LON=-122.062900, HEIGHT=582.300000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][325] creating ASCII reader for BRIB-ROCP
[2013-09-05 04:17:15][326] BRIB-ROCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][327] BRIB-ROCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/BRIB_ROCP.DHU.BRIB.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/BRIB_ROCP.DHU.BRIB.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][328] BRIB-ROCP:Unpacking BRIB-ROCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][329]  gunzip -f ['/tmp/glarms_XLh7Km/BRIB_ROCP.DHU.BRIB.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][330] BRIB-ROCP: working on file /tmp/glarms_XLh7Km/BRIB_ROCP.DHU.BRIB.20130905_0000.LCPC
[2013-09-05 04:17:15][331] BRIB-ROCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/BRIB_ROCP.DHU.BRIB.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][332] BRIB-ROCP: idx_from=15086 idx_to=15384
[2013-09-05 04:17:15][333] BRIB-ROCP: filled 2 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][334] Adding listener for BRIB-ROCP ...
[2013-09-05 04:17:15][335] GPS_station: Found P225 with LAT=37.713865, LON=-122.058327, HEIGHT=-1.000000
[2013-09-05 04:17:15][336] GPS_station: Found ROCP with LAT=37.781600, LON=-122.062900, HEIGHT=582.300000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][337] creating ASCII reader for P225-ROCP
[2013-09-05 04:17:15][338] P225-ROCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][339] P225-ROCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P225_ROCP.DHU.P225.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P225_ROCP.DHU.P225.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][340] P225-ROCP:Unpacking P225-ROCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][341]  gunzip -f ['/tmp/glarms_XLh7Km/P225_ROCP.DHU.P225.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][342] P225-ROCP: working on file /tmp/glarms_XLh7Km/P225_ROCP.DHU.P225.20130905_0000.LCPC
[2013-09-05 04:17:15][343] P225-ROCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P225_ROCP.DHU.P225.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][344] P225-ROCP: idx_from=15085 idx_to=15383
[2013-09-05 04:17:15][345] P225-ROCP: filled 2 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][346] Adding listener for P225-ROCP ...
[2013-09-05 04:17:15][347] GPS_station: Found P224 with LAT=37.863896, LON=-122.219059, HEIGHT=-1.000000
[2013-09-05 04:17:15][348] GPS_station: Found ROCP with LAT=37.781600, LON=-122.062900, HEIGHT=582.300000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][349] creating ASCII reader for P224-ROCP
[2013-09-05 04:17:15][350] P224-ROCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][351] P224-ROCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P224_ROCP.DHU.P224.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P224_ROCP.DHU.P224.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][352] P224-ROCP:Unpacking P224-ROCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][353]  gunzip -f ['/tmp/glarms_XLh7Km/P224_ROCP.DHU.P224.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][354] P224-ROCP: working on file /tmp/glarms_XLh7Km/P224_ROCP.DHU.P224.20130905_0000.LCPC
[2013-09-05 04:17:15][355] P224-ROCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P224_ROCP.DHU.P224.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][356] P224-ROCP: idx_from=15077 idx_to=15376
[2013-09-05 04:17:15][357] P224-ROCP: filled 1 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][358] Adding listener for P224-ROCP ...
[2013-09-05 04:17:15][359] GPS_station: Found P223 with LAT=37.722050, LON=-122.099760, HEIGHT=-1.000000
[2013-09-05 04:17:15][360] GPS_station: Found ROCP with LAT=37.781600, LON=-122.062900, HEIGHT=582.300000
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][361] creating ASCII reader for P223-ROCP
[2013-09-05 04:17:15][362] P223-ROCP: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][363] P223-ROCP: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P223_ROCP.DHU.P223.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P223_ROCP.DHU.P223.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][364] P223-ROCP:Unpacking P223-ROCP...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][365]  gunzip -f ['/tmp/glarms_XLh7Km/P223_ROCP.DHU.P223.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][366] P223-ROCP: working on file /tmp/glarms_XLh7Km/P223_ROCP.DHU.P223.20130905_0000.LCPC
[2013-09-05 04:17:15][367] P223-ROCP: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P223_ROCP.DHU.P223.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][368] P223-ROCP: idx_from=15124 idx_to=15422
[2013-09-05 04:17:15][369] P223-ROCP: filled 2 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][370] Adding listener for P223-ROCP ...
[2013-09-05 04:17:15][371] GPS_station: Found P178 with LAT=37.534513, LON=-122.332347, HEIGHT=129.602000
[2013-09-05 04:17:15][372] GPS_station: Found P222 with LAT=37.539239, LON=-122.083263, HEIGHT=53.495900
..... [ Debug (MainProcess,MainThread,__init__,L52) ] [2013-09-05 04:17:15][373] creating ASCII reader for P178-P222
[2013-09-05 04:17:15][374] P178-P222: Copying trackRT data files from /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries to /tmp/glarms_XLh7Km
..... [ Debug (MainProcess,MainThread,copyFromArchive,L291) ] [2013-09-05 04:17:15][375] P178-P222: Copying /home/glarms/src/dev-g-larms/testcases/Hayward_Grapenthin_etal_JGR_2014/gps_timeseries/2013/20130905/0000/P178_P222.DHU.P178.20130905_0000.LCPC.gz to /tmp/glarms_XLh7Km/P178_P222.DHU.P178.20130905_0000.LCPC.gz
..... [ Debug (MainProcess,MainThread,copyFromArchive,L305) ] [2013-09-05 04:17:15][376] P178-P222:Unpacking P178-P222...
..... [ Debug (MainProcess,MainThread,copyFromArchive,L306) ] [2013-09-05 04:17:15][377]  gunzip -f ['/tmp/glarms_XLh7Km/P178_P222.DHU.P178.20130905_0000.LCPC.gz']
[2013-09-05 04:17:15][378] P178-P222: working on file /tmp/glarms_XLh7Km/P178_P222.DHU.P178.20130905_0000.LCPC
[2013-09-05 04:17:15][379] P178-P222: Buffering 300 secs of data from file /tmp/glarms_XLh7Km/P178_P222.DHU.P178.20130905_0000.LCPC, range 2013-09-05T04:12:16.000000Z to 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,bufferData,L489) ] [2013-09-05 04:17:15][380] P178-P222: idx_from=14965 idx_to=15260
[2013-09-05 04:17:15][381] P178-P222: filled 5 gap(s), last data time: 2013-09-05T04:17:15.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L235) ] [2013-09-05 04:17:15][382] Adding listener for P178-P222 ...
..... [ Debug (MainProcess,MainThread,generateScenarios,L105) ] [2013-09-05 04:17:15][383] Simulator baseline Registry (size=15): {'P225-SCCP': <GPS_baseline(P225-SCCP, initial daemon)>, 'P223-ROCP': <GPS_baseline(P223-ROCP, initial daemon)>, 'P178-P222': <GPS_baseline(P178-P222, initial daemon)>, 'P225-ROCP': <GPS_baseline(P225-ROCP, initial daemon)>, 'P224-ROCP': <GPS_baseline(P224-ROCP, initial daemon)>, 'P222-SCCP': <GPS_baseline(P222-SCCP, initial daemon)>, 'P225-P229': <GPS_baseline(P225-P229, initial daemon)>, 'P268-PTRO': <GPS_baseline(P268-PTRO, initial daemon)>, 'P248-PTRO': <GPS_baseline(P248-PTRO, initial daemon)>, 'P262-PTRO': <GPS_baseline(P262-PTRO, initial daemon)>, 'SCCP-P229': <GPS_baseline(SCCP-P229, initial daemon)>, 'BRIB-ROCP': <GPS_baseline(BRIB-ROCP, initial daemon)>, 'P256-PTRO': <GPS_baseline(P256-PTRO, initial daemon)>, 'ROCP-P229': <GPS_baseline(ROCP-P229, initial daemon)>, 'P223-SCCP': <GPS_baseline(P223-SCCP, initial daemon)>}
..... [ Debug (MainProcess,MainThread,generateScenarios,L106) ] [2013-09-05 04:17:15][384] Earthquake scenarios found:
..... [ Debug (MainProcess,MainThread,generateScenarios,L133) ] [2013-09-05 04:17:15][385]   Scenario: Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,MainThread,generateScenarios,L134) ] [2013-09-05 04:17:15][386] 	    onset: 0:01:00 (sec)
..... [ Debug (MainProcess,MainThread,generateScenarios,L135) ] [2013-09-05 04:17:15][387] 	 latitude: 37.770000
..... [ Debug (MainProcess,MainThread,generateScenarios,L136) ] [2013-09-05 04:17:15][388] 	longitude: -122.139000
..... [ Debug (MainProcess,MainThread,generateScenarios,L137) ] [2013-09-05 04:17:15][389] 	magnitude: 6.900000
..... [ Debug (MainProcess,MainThread,generateScenarios,L138) ] [2013-09-05 04:17:15][390] 	    depth: 5.000000
..... [ Debug (MainProcess,MainThread,generateScenarios,L139) ] [2013-09-05 04:17:15][391] 	   H-disp: ./testcases/Hayward_Grapenthin_etal_JGR_2014/simulations/Hayward_baseline_disp_horizontal.gmtvec
..... [ Debug (MainProcess,MainThread,generateScenarios,L140) ] [2013-09-05 04:17:15][392] 	   V-disp: ./testcases/Hayward_Grapenthin_etal_JGR_2014/simulations/Hayward_baseline_disp_vertical.gmtvec
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][393] 	Adding Baseline P268-PTRO: dE=-0.000749 dN=0.033014 dU=-0.004882 wait_time=17.2553581591 s offset_time=0:01:17
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][394] 	Adding Baseline P248-PTRO: dE=0.043050 dN=-0.007606 dU=-0.007858 wait_time=10.9830687458 s offset_time=0:01:10
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][395] 	Adding Baseline P256-PTRO: dE=0.037633 dN=0.035779 dU=-0.014625 wait_time=16.7462007501 s offset_time=0:01:16
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][396] 	Adding Baseline P262-PTRO: dE=0.040664 dN=-0.074808 dU=0.000010 wait_time=9.53977885067 s offset_time=0:01:09
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][397] 	Adding Baseline SCCP-P229: dE=0.185442 dN=-0.204888 dU=0.002794 wait_time=4.78027741794 s offset_time=0:01:04
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][398] 	Adding Baseline ROCP-P229: dE=0.053962 dN=-0.087868 dU=0.002483 wait_time=2.27055937245 s offset_time=0:01:02
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][399] 	Adding Baseline P225-P229: dE=0.159439 dN=-0.199708 dU=0.002689 wait_time=3.1496210793 s offset_time=0:01:03
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][400] 	Adding Baseline P222-SCCP: dE=-0.481083 dN=0.631854 dU=0.006229 wait_time=5.94205387041 s offset_time=0:01:05
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][401] 	Adding Baseline P225-SCCP: dE=-0.026003 dN=0.005181 dU=-0.000105 wait_time=3.1496210793 s offset_time=0:01:03
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][402] 	Adding Baseline P223-SCCP: dE=-0.780604 dN=0.893813 dU=0.000504 wait_time=2.11691588164 s offset_time=0:01:02
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][403] 	Adding Baseline BRIB-ROCP: dE=-0.099543 dN=0.068008 dU=0.004535 wait_time=2.27055937245 s offset_time=0:01:02
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][404] 	Adding Baseline P225-ROCP: dE=0.105478 dN=-0.111840 dU=0.000206 wait_time=2.27055937245 s offset_time=0:01:02
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][405] 	Adding Baseline P224-ROCP: dE=0.082730 dN=-0.136085 dU=0.001168 wait_time=2.27055937245 s offset_time=0:01:02
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][406] 	Adding Baseline P223-ROCP: dE=-0.649123 dN=0.776792 dU=0.000815 wait_time=2.11691588164 s offset_time=0:01:02
..... [ Debug (MainProcess,MainThread,generateScenarios,L174) ] [2013-09-05 04:17:15][407] 	Adding Baseline P178-P222: dE=0.038045 dN=-0.125361 dU=-0.001485 wait_time=8.70814098098 s offset_time=0:01:08
..... [ Debug (MainProcess,P225-SCCP,connect,L104) ] [2013-09-05 04:17:15][408] P225-SCCP: opening trackRT file /tmp/glarms_XLh7Km/P225_SCCP.DHU.P225.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P225-SCCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][409] P225-SCCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P223-ROCP,connect,L104) ] [2013-09-05 04:17:15][410] P223-ROCP: opening trackRT file /tmp/glarms_XLh7Km/P223_ROCP.DHU.P223.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P178-P222,connect,L104) ] [2013-09-05 04:17:15][411] P178-P222: opening trackRT file /tmp/glarms_XLh7Km/P178_P222.DHU.P178.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P223-ROCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][412] P223-ROCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P225-SCCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][413] P225-SCCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P178-P222,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][414] P178-P222: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P225-ROCP,connect,L104) ] [2013-09-05 04:17:15][415] P225-ROCP: opening trackRT file /tmp/glarms_XLh7Km/P225_ROCP.DHU.P225.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P223-ROCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][416] P223-ROCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P224-ROCP,connect,L104) ] [2013-09-05 04:17:15][417] P224-ROCP: opening trackRT file /tmp/glarms_XLh7Km/P224_ROCP.DHU.P224.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P225-SCCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][418] P225-SCCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P225_SCCP.DHU.P225.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P222-SCCP,connect,L104) ] [2013-09-05 04:17:15][419] P222-SCCP: opening trackRT file /tmp/glarms_XLh7Km/P222_SCCP.DHU.P222.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P178-P222,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][420] P178-P222: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P225-P229,connect,L104) ] [2013-09-05 04:17:15][421] P225-P229: opening trackRT file /tmp/glarms_XLh7Km/P225_P229.DHU.P225.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P268-PTRO,connect,L104) ] [2013-09-05 04:17:15][422] P268-PTRO: opening trackRT file /tmp/glarms_XLh7Km/P268_PTRO.DHU.P268.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P225-ROCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][423] P225-ROCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P223-ROCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][424] P223-ROCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P223_ROCP.DHU.P223.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P248-PTRO,connect,L104) ] [2013-09-05 04:17:15][425] P248-PTRO: opening trackRT file /tmp/glarms_XLh7Km/P248_PTRO.DHU.P248.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P225-SCCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][426] GPSReader_trackRT_ASCII: Starting thread Thread-16
..... [ Debug (MainProcess,P262-PTRO,connect,L104) ] [2013-09-05 04:17:15][427] P262-PTRO: opening trackRT file /tmp/glarms_XLh7Km/P262_PTRO.DHU.P262.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P224-ROCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][428] P224-ROCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P222-SCCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][429] P222-SCCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,SCCP-P229,connect,L104) ] [2013-09-05 04:17:15][430] SCCP-P229: opening trackRT file /tmp/glarms_XLh7Km/SCCP_P229.DHU.SCCP.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P178-P222,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][431] P178-P222: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P178_P222.DHU.P178.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,BRIB-ROCP,connect,L104) ] [2013-09-05 04:17:15][432] BRIB-ROCP: opening trackRT file /tmp/glarms_XLh7Km/BRIB_ROCP.DHU.BRIB.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P225-P229,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][433] P225-P229: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P256-PTRO,connect,L104) ] [2013-09-05 04:17:15][434] P256-PTRO: opening trackRT file /tmp/glarms_XLh7Km/P256_PTRO.DHU.P256.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P225-ROCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][435] P225-ROCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P268-PTRO,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][436] P268-PTRO: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,ROCP-P229,connect,L104) ] [2013-09-05 04:17:15][437] ROCP-P229: opening trackRT file /tmp/glarms_XLh7Km/ROCP_P229.DHU.ROCP.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P223-ROCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][438] GPSReader_trackRT_ASCII: Starting thread Thread-17
..... [ Debug (MainProcess,P248-PTRO,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][439] P248-PTRO: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P223-SCCP,connect,L104) ] [2013-09-05 04:17:15][440] P223-SCCP: opening trackRT file /tmp/glarms_XLh7Km/P223_SCCP.DHU.P223.20130905_0000.LCPC ... 
..... [ Debug (MainProcess,P224-ROCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][441] P224-ROCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P225-SCCP,initialize,L214) ] [2013-09-05 04:17:15][442] P225-SCCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P222-SCCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][443] P222-SCCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P262-PTRO,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][444] P262-PTRO: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,SCCP-P229,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][445] SCCP-P229: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P178-P222,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][446] GPSReader_trackRT_ASCII: Starting thread Thread-18
..... [ Debug (MainProcess,P225-P229,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][447] P225-P229: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,BRIB-ROCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][448] BRIB-ROCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P225-ROCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][449] P225-ROCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P225_ROCP.DHU.P225.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P256-PTRO,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][450] P256-PTRO: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P268-PTRO,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][451] P268-PTRO: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P248-PTRO,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][452] P248-PTRO: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P223-ROCP,initialize,L214) ] [2013-09-05 04:17:15][453] P223-ROCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,ROCP-P229,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][454] ROCP-P229: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P223-SCCP,prepare_file_switchover,L118) ] [2013-09-05 04:17:15][455] P223-SCCP: Determining trackRT file switchover ... 
..... [ Debug (MainProcess,P224-ROCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][456] P224-ROCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P224_ROCP.DHU.P224.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P225-SCCP,initialize,L220) ] [2013-09-05 04:17:15][457] P225-SCCP: Jumping 2 comment lines plus ~2624410 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P222-SCCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][458] P222-SCCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P222_SCCP.DHU.P222.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P262-PTRO,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][459] P262-PTRO: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,SCCP-P229,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][460] SCCP-P229: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P225-P229,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][461] P225-P229: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P225_P229.DHU.P225.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P178-P222,initialize,L214) ] [2013-09-05 04:17:15][462] P178-P222: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,BRIB-ROCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][463] BRIB-ROCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P225-ROCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][464] GPSReader_trackRT_ASCII: Starting thread Thread-19
..... [ Debug (MainProcess,P256-PTRO,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][465] P256-PTRO: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P268-PTRO,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][466] P268-PTRO: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P268_PTRO.DHU.P268.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P248-PTRO,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][467] P248-PTRO: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P248_PTRO.DHU.P248.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P223-ROCP,initialize,L220) ] [2013-09-05 04:17:15][468] P223-ROCP: Jumping 2 comment lines plus ~2668006 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,ROCP-P229,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][469] ROCP-P229: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P223-SCCP,prepare_file_switchover,L140) ] [2013-09-05 04:17:15][470] P223-SCCP: prepare_file_switchover: READ_TIME=2013-09-05 04:17:15, target_time_utc=2013-09-05 05:59:44 timer_secs=6149
..... [ Debug (MainProcess,P224-ROCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][471] GPSReader_trackRT_ASCII: Starting thread Thread-20
..... [ Debug (MainProcess,P222-SCCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][472] GPSReader_trackRT_ASCII: Starting thread Thread-21
..... [ Debug (MainProcess,P262-PTRO,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][473] P262-PTRO: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P262_PTRO.DHU.P262.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,SCCP-P229,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][474] SCCP-P229: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/SCCP_P229.DHU.SCCP.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P225-P229,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][475] GPSReader_trackRT_ASCII: Starting thread Thread-22
..... [ Debug (MainProcess,P178-P222,initialize,L220) ] [2013-09-05 04:17:15][476] P178-P222: Jumping 2 comment lines plus ~2639980 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,BRIB-ROCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][477] BRIB-ROCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/BRIB_ROCP.DHU.BRIB.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P225-ROCP,initialize,L214) ] [2013-09-05 04:17:15][478] P225-ROCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P225-ROCP,initialize,L220) ] [2013-09-05 04:17:15][479] P225-ROCP: Jumping 2 comment lines plus ~2661259 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P268-PTRO,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][480] GPSReader_trackRT_ASCII: Starting thread Thread-23
..... [ Debug (MainProcess,P248-PTRO,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][481] GPSReader_trackRT_ASCII: Starting thread Thread-24
..... [ Debug (MainProcess,ROCP-P229,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][482] ROCP-P229: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/ROCP_P229.DHU.ROCP.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P223-SCCP,prepare_file_switchover,L149) ] [2013-09-05 04:17:15][483] P223-SCCP: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P223_SCCP.DHU.P223.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P224-ROCP,initialize,L214) ] [2013-09-05 04:17:15][484] P224-ROCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P262-PTRO,prepare_file_switchover,L151) ] [2013-09-05 04:17:15][485] GPSReader_trackRT_ASCII: Starting thread Thread-25
..... [ Debug (MainProcess,P222-SCCP,initialize,L214) ] [2013-09-05 04:17:16][486] P222-SCCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,SCCP-P229,prepare_file_switchover,L151) ] [2013-09-05 04:17:16][487] GPSReader_trackRT_ASCII: Starting thread Thread-26
..... [ Debug (MainProcess,BRIB-ROCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:16][488] GPSReader_trackRT_ASCII: Starting thread Thread-27
..... [ Debug (MainProcess,P256-PTRO,prepare_file_switchover,L149) ] [2013-09-05 04:17:16][489] P256-PTRO: Will attempt switchover to next trackRT input file /tmp/glarms_XLh7Km/P256_PTRO.DHU.P256.20130905_0600.LCPC in 6149 secs
..... [ Debug (MainProcess,P225-P229,initialize,L214) ] [2013-09-05 04:17:16][490] P225-P229: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,ROCP-P229,prepare_file_switchover,L151) ] [2013-09-05 04:17:16][491] GPSReader_trackRT_ASCII: Starting thread Thread-28
..... [ Debug (MainProcess,P248-PTRO,initialize,L214) ] [2013-09-05 04:17:16][492] P248-PTRO: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P223-SCCP,prepare_file_switchover,L151) ] [2013-09-05 04:17:16][493] GPSReader_trackRT_ASCII: Starting thread Thread-29
..... [ Debug (MainProcess,P224-ROCP,initialize,L220) ] [2013-09-05 04:17:16][494] P224-ROCP: Jumping 2 comment lines plus ~2660048 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P268-PTRO,initialize,L214) ] [2013-09-05 04:17:16][495] P268-PTRO: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P262-PTRO,initialize,L214) ] [2013-09-05 04:17:16][496] P262-PTRO: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P222-SCCP,initialize,L220) ] [2013-09-05 04:17:16][497] P222-SCCP: Jumping 2 comment lines plus ~2621815 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,SCCP-P229,initialize,L214) ] [2013-09-05 04:17:16][498] SCCP-P229: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,BRIB-ROCP,initialize,L214) ] [2013-09-05 04:17:16][499] BRIB-ROCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P256-PTRO,prepare_file_switchover,L151) ] [2013-09-05 04:17:16][500] GPSReader_trackRT_ASCII: Starting thread Thread-30
..... [ Debug (MainProcess,P225-P229,initialize,L220) ] [2013-09-05 04:17:16][501] P225-P229: Jumping 2 comment lines plus ~2511268 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,ROCP-P229,initialize,L214) ] [2013-09-05 04:17:16][502] ROCP-P229: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P248-PTRO,initialize,L220) ] [2013-09-05 04:17:16][503] P248-PTRO: Jumping 2 comment lines plus ~2656934 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P223-SCCP,initialize,L214) ] [2013-09-05 04:17:16][504] P223-SCCP: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,P268-PTRO,initialize,L220) ] [2013-09-05 04:17:16][505] P268-PTRO: Jumping 2 comment lines plus ~2661259 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P262-PTRO,initialize,L220) ] [2013-09-05 04:17:16][506] P262-PTRO: Jumping 2 comment lines plus ~2630292 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,SCCP-P229,initialize,L220) ] [2013-09-05 04:17:16][507] SCCP-P229: Jumping 2 comment lines plus ~2510230 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,BRIB-ROCP,initialize,L220) ] [2013-09-05 04:17:16][508] BRIB-ROCP: Jumping 2 comment lines plus ~2661432 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P256-PTRO,initialize,L214) ] [2013-09-05 04:17:16][509] P256-PTRO: Initializing trackRT ASCII file reader, please wait ...
..... [ Debug (MainProcess,ROCP-P229,initialize,L220) ] [2013-09-05 04:17:16][510] ROCP-P229: Jumping 2 comment lines plus ~2515420 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P223-SCCP,initialize,L220) ] [2013-09-05 04:17:16][511] P223-SCCP: Jumping 2 comment lines plus ~2632022 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P256-PTRO,initialize,L220) ] [2013-09-05 04:17:16][512] P256-PTRO: Jumping 2 comment lines plus ~2661086 bytes in trackRT file to epoch 2013-09-05T04:17:15.000000Z ...
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:17:20][513] P225-P229: Data gap, last record: 2013-09-05T04:17:19.000000Z, new record: 2013-09-05T04:17:21.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:17:36][514] P225-P229: Data gap, last record: 2013-09-05T04:17:36.000000Z, new record: 2013-09-05T04:17:38.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:17:39][515] P178-P222: Data gap, last record: 2013-09-05T04:17:37.000000Z, new record: 2013-09-05T04:17:39.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:17:40][516] P178-P222: Data gap, last record: 2013-09-05T04:17:40.000000Z, new record: 2013-09-05T04:17:42.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,getOffset,L270) ] [2013-09-05 04:18:16][517] 2013-09-05T04:18:16.000000Z - Sending message for scenario Hayward_Grapenthin_etal_JGR_2014 while checking P178-P222
..... [ Debug (MainProcess,P178-P222,onMessage,L131) ] [2013-09-05 04:18:14][518] EEWReceiver: trying to add event
..... [ Debug (MainProcess,P178-P222,__init__,L209) ] [2013-09-05 04:18:14][519] EEWEvent: creating EEWMsg object Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:14][520] P268-PTRO: 2013-09-05T04:18:13.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
[2013-09-05 04:18:15][521] P268-PTRO: triggerTime=2015-09-07T16:37:02.422308Z distThreshold=1000.000000, eventToBase=51.766074, eventToRovr=89.310830, minmaxdist=51.766074, waittime=18
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:15][522] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P268-PTRO ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:16][523] P248-PTRO: 2013-09-05T04:18:15.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-31,determineOffset,L557) ] [2013-09-05 04:18:16][524] P268-PTRO 2013-09-05T04:18:15.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:16][525] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:15.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
[2013-09-05 04:18:16][526] P248-PTRO: triggerTime=2015-09-07T16:37:02.616424Z distThreshold=1000.000000, eventToBase=51.766074, eventToRovr=32.949206, minmaxdist=32.949206, waittime=11
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:18][527] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P248-PTRO ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:18][528] P256-PTRO: 2013-09-05T04:18:15.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:17][529] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:16.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L557) ] [2013-09-05 04:18:17][530] P248-PTRO 2013-09-05T04:18:16.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:17][531] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:16.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
[2013-09-05 04:18:17][532] P256-PTRO: triggerTime=2015-09-07T16:37:02.787442Z distThreshold=1000.000000, eventToBase=51.766074, eventToRovr=50.238602, minmaxdist=50.238602, waittime=17
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:18][533] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P256-PTRO ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:18][534] P262-PTRO: 2013-09-05T04:18:17.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:18][535] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:17.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:18][536] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:17.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L557) ] [2013-09-05 04:18:18][537] P256-PTRO 2013-09-05T04:18:18.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:19][538] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:18.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:20][539] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:18.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:19][540] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:18.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
[2013-09-05 04:18:19][541] P262-PTRO: triggerTime=2015-09-07T16:37:03.026467Z distThreshold=1000.000000, eventToBase=51.766074, eventToRovr=28.619337, minmaxdist=28.619337, waittime=10
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:19][542] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P262-PTRO ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:19][543] SCCP-P229: 2013-09-05T04:18:18.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:19][544] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:19.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:19][545] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:19.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L557) ] [2013-09-05 04:18:21][546] P262-PTRO 2013-09-05T04:18:19.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:21][547] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:19.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:21][548] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:19.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
[2013-09-05 04:18:20][549] SCCP-P229: triggerTime=2015-09-07T16:37:03.244755Z distThreshold=1000.000000, eventToBase=14.340832, eventToRovr=17.826162, minmaxdist=14.340832, waittime=5
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:20][550] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=SCCP-P229 ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:20][551] ROCP-P229: 2013-09-05T04:18:19.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:20][552] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:19.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:20][553] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:20.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:20][554] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:20.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
..... [ Debug (MainProcess,Thread-35,determineOffset,L557) ] [2013-09-05 04:18:22][555] SCCP-P229 2013-09-05T04:18:20.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:20][556] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:20.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-35,determineOffset,L569) ] [2013-09-05 04:18:21][557] SCCP-P229: Waiting ... readTime = 2013-09-05T04:18:20.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:21.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:21][558] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:20.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:21][559] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:21.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
[2013-09-05 04:18:21][560] ROCP-P229: triggerTime=2015-09-07T16:37:03.432486Z distThreshold=1000.000000, eventToBase=14.340832, eventToRovr=6.811678, minmaxdist=6.811678, waittime=3
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:21][561] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=ROCP-P229 ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:21][562] P225-P229: 2013-09-05T04:18:22.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:21][563] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:21.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:21][564] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:21.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-35,determineOffset,L599) ] [2013-09-05 04:18:21][565] SCCP-P229: starttime=2013-09-05T04:18:21.000000Z endTime=2013-09-05T04:23:21.000000Z dumpTime=2013-09-05T04:22:21.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:21][566] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:21.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-36,determineOffset,L557) ] [2013-09-05 04:18:23][567] ROCP-P229 2013-09-05T04:18:20.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-36,determineOffset,L599) ] [2013-09-05 04:18:23][568] ROCP-P229: starttime=2013-09-05T04:18:20.000000Z endTime=2013-09-05T04:23:20.000000Z dumpTime=2013-09-05T04:22:20.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:21][569] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:22.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:22][570] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:22.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:22][571] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:22.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:23][572] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:22.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:22][573] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:22.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
[2013-09-05 04:18:23][574] P225-P229: triggerTime=2015-09-07T16:37:03.693271Z distThreshold=1000.000000, eventToBase=14.340832, eventToRovr=9.448863, minmaxdist=9.448863, waittime=4
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:23][575] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P225-P229 ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:23][576] P222-SCCP: 2013-09-05T04:18:22.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:23][577] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:23.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:23][578] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:23.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:23][579] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:23.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-37,determineOffset,L557) ] [2013-09-05 04:18:24][580] P225-P229 2013-09-05T04:18:24.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-37,determineOffset,L599) ] [2013-09-05 04:18:24][581] P225-P229: starttime=2013-09-05T04:18:24.000000Z endTime=2013-09-05T04:23:24.000000Z dumpTime=2013-09-05T04:22:24.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:24][582] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:24.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:23][583] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:24.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:23][584] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:24.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
[2013-09-05 04:18:25][585] P222-SCCP: triggerTime=2015-09-07T16:37:03.994442Z distThreshold=1000.000000, eventToBase=17.826162, eventToRovr=26.124423, minmaxdist=17.826162, waittime=6
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:25][586] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P222-SCCP ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:25][587] P225-SCCP: 2013-09-05T04:18:24.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:24][588] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:24.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:25][589] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:24.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-38,determineOffset,L557) ] [2013-09-05 04:18:25][590] P222-SCCP 2013-09-05T04:18:24.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-38,determineOffset,L599) ] [2013-09-05 04:18:25][591] P222-SCCP: starttime=2013-09-05T04:18:24.000000Z endTime=2013-09-05T04:23:24.000000Z dumpTime=2013-09-05T04:22:24.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L569) ] [2013-09-05 04:18:25][592] P262-PTRO: Waiting ... readTime = 2013-09-05T04:18:25.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:26.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:25][593] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:25.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
[2013-09-05 04:18:25][594] P225-SCCP: triggerTime=2015-09-07T16:37:04.200043Z distThreshold=1000.000000, eventToBase=17.826162, eventToRovr=9.448863, minmaxdist=9.448863, waittime=4
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:25][595] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P225-SCCP ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:25][596] P223-SCCP: 2013-09-05T04:18:24.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:26][597] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:25.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:26][598] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:25.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-39,determineOffset,L557) ] [2013-09-05 04:18:26][599] P225-SCCP 2013-09-05T04:18:26.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-39,determineOffset,L599) ] [2013-09-05 04:18:26][600] P225-SCCP: starttime=2013-09-05T04:18:26.000000Z endTime=2013-09-05T04:23:26.000000Z dumpTime=2013-09-05T04:22:26.000000Z
..... [ Debug (MainProcess,Thread-34,determineOffset,L599) ] [2013-09-05 04:18:25][601] P262-PTRO: starttime=2013-09-05T04:18:26.000000Z endTime=2013-09-05T04:23:26.000000Z dumpTime=2013-09-05T04:22:26.000000Z
..... [ Debug (MainProcess,Thread-32,determineOffset,L569) ] [2013-09-05 04:18:25][602] P248-PTRO: Waiting ... readTime = 2013-09-05T04:18:26.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:27.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:25][603] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:26.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
[2013-09-05 04:18:25][604] P223-SCCP: triggerTime=2015-09-07T16:37:04.342426Z distThreshold=1000.000000, eventToBase=17.826162, eventToRovr=6.350748, minmaxdist=6.350748, waittime=3
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:25][605] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P223-SCCP ...
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:25][606] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:26.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:25][607] BRIB-ROCP: 2013-09-05T04:18:25.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-32,determineOffset,L599) ] [2013-09-05 04:18:27][608] P248-PTRO: starttime=2013-09-05T04:18:27.000000Z endTime=2013-09-05T04:23:27.000000Z dumpTime=2013-09-05T04:22:27.000000Z
..... [ Debug (MainProcess,Thread-40,determineOffset,L557) ] [2013-09-05 04:18:27][609] P223-SCCP 2013-09-05T04:18:25.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-40,determineOffset,L599) ] [2013-09-05 04:18:27][610] P223-SCCP: starttime=2013-09-05T04:18:25.000000Z endTime=2013-09-05T04:23:25.000000Z dumpTime=2013-09-05T04:22:25.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:26][611] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:27.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:28][612] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:27.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:28][613] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:28.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
[2013-09-05 04:18:28][614] BRIB-ROCP: triggerTime=2015-09-07T16:37:04.593553Z distThreshold=1000.000000, eventToBase=6.811678, eventToRovr=16.655412, minmaxdist=6.811678, waittime=3
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:28][615] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=BRIB-ROCP ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:28][616] P225-ROCP: 2013-09-05T04:18:28.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:28][617] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:28.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:28][618] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:29.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-41,determineOffset,L557) ] [2013-09-05 04:18:28][619] BRIB-ROCP 2013-09-05T04:18:27.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-41,determineOffset,L599) ] [2013-09-05 04:18:28][620] BRIB-ROCP: starttime=2013-09-05T04:18:27.000000Z endTime=2013-09-05T04:23:27.000000Z dumpTime=2013-09-05T04:22:27.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:28][621] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:29.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
[2013-09-05 04:18:29][622] P225-ROCP: triggerTime=2015-09-07T16:37:04.901372Z distThreshold=1000.000000, eventToBase=6.811678, eventToRovr=9.448863, minmaxdist=6.811678, waittime=3
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:29][623] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P225-ROCP ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:30][624] P224-ROCP: 2013-09-05T04:18:29.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:28][625] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:30.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-42,determineOffset,L557) ] [2013-09-05 04:18:30][626] P225-ROCP 2013-09-05T04:18:29.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-42,determineOffset,L599) ] [2013-09-05 04:18:30][627] P225-ROCP: starttime=2013-09-05T04:18:29.000000Z endTime=2013-09-05T04:23:29.000000Z dumpTime=2013-09-05T04:22:29.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:30][628] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:30.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:29][629] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:31.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
[2013-09-05 04:18:29][630] P224-ROCP: triggerTime=2015-09-07T16:37:05.113075Z distThreshold=1000.000000, eventToBase=6.811678, eventToRovr=12.588307, minmaxdist=6.811678, waittime=3
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:29][631] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P224-ROCP ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:29][632] P223-ROCP: 2013-09-05T04:18:29.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:30][633] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:31.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
..... [ Debug (MainProcess,Thread-43,determineOffset,L557) ] [2013-09-05 04:18:29][634] P224-ROCP 2013-09-05T04:18:30.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-43,determineOffset,L599) ] [2013-09-05 04:18:29][635] P224-ROCP: starttime=2013-09-05T04:18:30.000000Z endTime=2013-09-05T04:23:30.000000Z dumpTime=2013-09-05T04:22:30.000000Z
..... [ Debug (MainProcess,Thread-33,determineOffset,L569) ] [2013-09-05 04:18:31][636] P256-PTRO: Waiting ... readTime = 2013-09-05T04:18:32.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:33.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:31][637] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:32.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
[2013-09-05 04:18:32][638] P223-ROCP: triggerTime=2015-09-07T16:37:05.350938Z distThreshold=1000.000000, eventToBase=6.811678, eventToRovr=6.350748, minmaxdist=6.350748, waittime=3
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:32][639] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P223-ROCP ...
..... [ Debug (MainProcess,P178-P222,onNewEQEvent,L94) ] [2013-09-05 04:18:32][640] P178-P222: 2013-09-05T04:18:16.000000Z NewEQEvent id = Hayward_Grapenthin_etal_JGR_2014 
..... [ Debug (MainProcess,Thread-33,determineOffset,L599) ] [2013-09-05 04:18:33][641] P256-PTRO: starttime=2013-09-05T04:18:33.000000Z endTime=2013-09-05T04:23:33.000000Z dumpTime=2013-09-05T04:22:33.000000Z
..... [ Debug (MainProcess,Thread-44,determineOffset,L557) ] [2013-09-05 04:18:30][642] P223-ROCP 2013-09-05T04:18:30.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-44,determineOffset,L599) ] [2013-09-05 04:18:30][643] P223-ROCP: starttime=2013-09-05T04:18:30.000000Z endTime=2013-09-05T04:23:30.000000Z dumpTime=2013-09-05T04:22:30.000000Z
..... [ Debug (MainProcess,Thread-31,determineOffset,L569) ] [2013-09-05 04:18:31][644] P268-PTRO: Waiting ... readTime = 2013-09-05T04:18:33.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:34.000000Z
[2013-09-05 04:18:31][645] P178-P222: triggerTime=2015-09-07T16:37:05.574749Z distThreshold=1000.000000, eventToBase=26.124423, eventToRovr=31.231225, minmaxdist=26.124423, waittime=9
..... [ Debug (MainProcess,P178-P222,__init__,L47) ] [2013-09-05 04:18:31][646] Creating ASCII Offset Writer event=Hayward_Grapenthin_etal_JGR_2014  baseline=P178-P222 ...
..... [ Debug (MainProcess,Thread-45,determineOffset,L557) ] [2013-09-05 04:18:31][647] P178-P222 2013-09-05T04:18:16.000000Z determineOffset for event-id Hayward_Grapenthin_etal_JGR_2014
..... [ Debug (MainProcess,Thread-31,determineOffset,L599) ] [2013-09-05 04:18:33][648] P268-PTRO: starttime=2013-09-05T04:18:34.000000Z endTime=2013-09-05T04:23:34.000000Z dumpTime=2013-09-05T04:22:34.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:33][649] P178-P222: Waiting ... readTime = 2013-09-05T04:18:16.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:35][650] P178-P222: Waiting ... readTime = 2013-09-05T04:18:17.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:34][651] P178-P222: Waiting ... readTime = 2013-09-05T04:18:18.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:36][652] P178-P222: Waiting ... readTime = 2013-09-05T04:18:19.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:35][653] P178-P222: Waiting ... readTime = 2013-09-05T04:18:20.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:38][654] P178-P222: Waiting ... readTime = 2013-09-05T04:18:21.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:37][655] P178-P222: Waiting ... readTime = 2013-09-05T04:18:22.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,Thread-45,determineOffset,L569) ] [2013-09-05 04:18:38][656] P178-P222: Waiting ... readTime = 2013-09-05T04:18:23.000000Z < expected S-wave arrival offset_time = 2013-09-05T04:18:25.000000Z
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:18:37][657] P178-P222: Data gap, last record: 2013-09-05T04:18:23.000000Z, new record: 2013-09-05T04:18:25.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:18:39][658] P225-P229: Data gap, last record: 2013-09-05T04:18:39.000000Z, new record: 2013-09-05T04:18:42.000000Z, inserting 2 record(s)
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:18:40][659] P225-P229: Data gap, last record: 2013-09-05T04:18:40.000000Z, new record: 2013-09-05T04:18:42.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,Thread-45,determineOffset,L599) ] [2013-09-05 04:18:39][660] P178-P222: starttime=2013-09-05T04:18:25.000000Z endTime=2013-09-05T04:23:25.000000Z dumpTime=2013-09-05T04:22:25.000000Z
..... [ Debug (MainProcess,SCCP-P229,run,L186) ] [2013-09-05 04:18:41][661] SCCP-P229: Data gap, last record: 2013-09-05T04:18:39.000000Z, new record: 2013-09-05T04:18:41.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,ROCP-P229,run,L186) ] [2013-09-05 04:18:40][662] ROCP-P229: Data gap, last record: 2013-09-05T04:18:39.000000Z, new record: 2013-09-05T04:18:42.000000Z, inserting 2 record(s)
..... [ Debug (MainProcess,ROCP-P229,run,L186) ] [2013-09-05 04:18:40][663] ROCP-P229: Data gap, last record: 2013-09-05T04:18:40.000000Z, new record: 2013-09-05T04:18:42.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:18:51][664] P178-P222: Data gap, last record: 2013-09-05T04:18:38.000000Z, new record: 2013-09-05T04:18:41.000000Z, inserting 2 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:18:39][665] P178-P222: Data gap, last record: 2013-09-05T04:18:39.000000Z, new record: 2013-09-05T04:18:41.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:19:01][666] P178-P222: Data gap, last record: 2013-09-05T04:18:49.000000Z, new record: 2013-09-05T04:18:51.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:19:12][667] P178-P222: Data gap, last record: 2013-09-05T04:19:03.000000Z, new record: 2013-09-05T04:19:05.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:19:25][668] P178-P222: Data gap, last record: 2013-09-05T04:19:16.000000Z, new record: 2013-09-05T04:19:18.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:19:26][669] P178-P222: Data gap, last record: 2013-09-05T04:19:18.000000Z, new record: 2013-09-05T04:19:21.000000Z, inserting 2 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:19:29][670] P178-P222: Data gap, last record: 2013-09-05T04:19:19.000000Z, new record: 2013-09-05T04:19:21.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,ROCP-P229,run,L186) ] [2013-09-05 04:19:35][671] ROCP-P229: Data gap, last record: 2013-09-05T04:19:34.000000Z, new record: 2013-09-05T04:19:36.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:19:37][672] P178-P222: Data gap, last record: 2013-09-05T04:19:29.000000Z, new record: 2013-09-05T04:19:31.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:19:53][673] P225-P229: Data gap, last record: 2013-09-05T04:19:53.000000Z, new record: 2013-09-05T04:19:55.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:20:30][674] P225-P229: Data gap, last record: 2013-09-05T04:20:31.000000Z, new record: 2013-09-05T04:20:33.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,ROCP-P229,run,L186) ] [2013-09-05 04:20:29][675] ROCP-P229: Data gap, last record: 2013-09-05T04:20:31.000000Z, new record: 2013-09-05T04:20:33.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,SCCP-P229,run,L186) ] [2013-09-05 04:20:35][676] SCCP-P229: Data gap, last record: 2013-09-05T04:20:31.000000Z, new record: 2013-09-05T04:20:33.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,SCCP-P229,run,L186) ] [2013-09-05 04:20:37][677] SCCP-P229: Data gap, last record: 2013-09-05T04:20:36.000000Z, new record: 2013-09-05T04:20:38.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P178-P222,run,L186) ] [2013-09-05 04:20:45][678] P178-P222: Data gap, last record: 2013-09-05T04:20:41.000000Z, new record: 2013-09-05T04:20:43.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P225-ROCP,run,L186) ] [2013-09-05 04:21:06][679] P225-ROCP: Data gap, last record: 2013-09-05T04:21:06.000000Z, new record: 2013-09-05T04:21:08.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P224-ROCP,run,L186) ] [2013-09-05 04:21:04][680] P224-ROCP: Data gap, last record: 2013-09-05T04:21:06.000000Z, new record: 2013-09-05T04:21:08.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,BRIB-ROCP,run,L186) ] [2013-09-05 04:21:04][681] BRIB-ROCP: Data gap, last record: 2013-09-05T04:21:06.000000Z, new record: 2013-09-05T04:21:08.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,P225-P229,run,L186) ] [2013-09-05 04:21:42][682] P225-P229: Data gap, last record: 2013-09-05T04:21:45.000000Z, new record: 2013-09-05T04:21:47.000000Z, inserting 1 record(s)
..... [ Debug (MainProcess,Thread-36,dump_displacements,L790) ] [2013-09-05 04:22:20][683] Dumping data for ROCP-P229 to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/ROCP-P229_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-35,dump_displacements,L790) ] [2013-09-05 04:22:22][684] Dumping data for SCCP-P229 to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/SCCP-P229_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-37,dump_displacements,L790) ] [2013-09-05 04:22:22][685] Dumping data for P225-P229 to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P225-P229_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-38,dump_displacements,L790) ] [2013-09-05 04:22:25][686] Dumping data for P222-SCCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P222-SCCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-39,dump_displacements,L790) ] [2013-09-05 04:22:27][687] Dumping data for P225-SCCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P225-SCCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-42,dump_displacements,L790) ] [2013-09-05 04:22:30][688] Dumping data for P225-ROCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P225-ROCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-32,dump_displacements,L790) ] [2013-09-05 04:22:28][689] Dumping data for P248-PTRO to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P248-PTRO_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-34,dump_displacements,L790) ] [2013-09-05 04:22:29][690] Dumping data for P262-PTRO to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P262-PTRO_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-41,dump_displacements,L790) ] [2013-09-05 04:22:29][691] Dumping data for BRIB-ROCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/BRIB-ROCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-45,dump_displacements,L790) ] [2013-09-05 04:22:26][692] Dumping data for P178-P222 to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P178-P222_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-43,dump_displacements,L790) ] [2013-09-05 04:22:29][693] Dumping data for P224-ROCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P224-ROCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-40,dump_displacements,L790) ] [2013-09-05 04:22:32][694] Dumping data for P223-SCCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P223-SCCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-44,dump_displacements,L790) ] [2013-09-05 04:22:27][695] Dumping data for P223-ROCP to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P223-ROCP_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-33,dump_displacements,L790) ] [2013-09-05 04:22:34][696] Dumping data for P256-PTRO to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P256-PTRO_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-31,dump_displacements,L790) ] [2013-09-05 04:22:39][697] Dumping data for P268-PTRO to file `/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P268-PTRO_displacements.log' ... complete.
..... [ Debug (MainProcess,Thread-36,determineOffset,L749) ] [2013-09-05 04:23:19][698] ROCP-P229: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-36,close,L122) ] [2013-09-05 04:23:19][699] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- ROCP-P229: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-36,close,L158) ] [2013-09-05 04:23:21][700] ROCP-P229: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/ROCP-P229.log', mode 'w+' at 0x2dff5d0>'
..... [ Debug (MainProcess,Thread-36,close,L160) ] [2013-09-05 04:23:21][701] ROCP-P229: Closed? True
[2013-09-05 04:23:21][702] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=ROCP-P229 elapsed_time=60.02 skew=63289124.80 secs
..... [ Debug (MainProcess,Thread-37,determineOffset,L749) ] [2013-09-05 04:23:18][703] P225-P229: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-37,close,L122) ] [2013-09-05 04:23:18][704] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P225-P229: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-37,close,L158) ] [2013-09-05 04:23:18][705] P225-P229: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P225-P229.log', mode 'w+' at 0x2dff9c0>'
..... [ Debug (MainProcess,Thread-37,close,L160) ] [2013-09-05 04:23:18][706] P225-P229: Closed? True
[2013-09-05 04:23:18][707] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P225-P229 elapsed_time=60.29 skew=63289124.09 secs
..... [ Debug (MainProcess,Thread-38,determineOffset,L749) ] [2013-09-05 04:23:24][708] P222-SCCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-38,close,L122) ] [2013-09-05 04:23:24][709] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P222-SCCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-38,close,L158) ] [2013-09-05 04:23:24][710] P222-SCCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P222-SCCP.log', mode 'w+' at 0x2dff780>'
..... [ Debug (MainProcess,Thread-38,close,L160) ] [2013-09-05 04:23:24][711] P222-SCCP: Closed? True
[2013-09-05 04:23:22][712] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P222-SCCP elapsed_time=60.13 skew=63289122.30 secs
..... [ Debug (MainProcess,Thread-35,determineOffset,L749) ] [2013-09-05 04:23:23][713] SCCP-P229: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-35,close,L122) ] [2013-09-05 04:23:23][714] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- SCCP-P229: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-35,close,L158) ] [2013-09-05 04:23:23][715] SCCP-P229: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/SCCP-P229.log', mode 'w+' at 0x2dff810>'
..... [ Debug (MainProcess,Thread-35,close,L160) ] [2013-09-05 04:23:23][716] SCCP-P229: Closed? True
[2013-09-05 04:23:23][717] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=SCCP-P229 elapsed_time=61.01 skew=63289122.54 secs
..... [ Debug (MainProcess,Thread-45,determineOffset,L749) ] [2013-09-05 04:23:25][718] P178-P222: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-45,close,L122) ] [2013-09-05 04:23:25][719] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P178-P222: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-45,close,L158) ] [2013-09-05 04:23:25][720] P178-P222: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P178-P222.log', mode 'w+' at 0x2a209c0>'
..... [ Debug (MainProcess,Thread-45,close,L160) ] [2013-09-05 04:23:25][721] P178-P222: Closed? True
[2013-09-05 04:23:25][722] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P178-P222 elapsed_time=59.28 skew=63289120.85 secs
..... [ Debug (MainProcess,Thread-34,determineOffset,L749) ] [2013-09-05 04:23:26][723] P262-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-34,close,L122) ] [2013-09-05 04:23:26][724] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P262-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-34,close,L158) ] [2013-09-05 04:23:26][725] P262-PTRO: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P262-PTRO.log', mode 'w+' at 0x2dff8a0>'
..... [ Debug (MainProcess,Thread-34,close,L160) ] [2013-09-05 04:23:26][726] P262-PTRO: Closed? True
[2013-09-05 04:23:26][727] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P262-PTRO elapsed_time=61.89 skew=63289117.37 secs
..... [ Debug (MainProcess,Thread-39,determineOffset,L749) ] [2013-09-05 04:23:28][728] P225-SCCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-39,close,L122) ] [2013-09-05 04:23:27][729] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P225-SCCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-39,close,L158) ] [2013-09-05 04:23:27][730] P225-SCCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P225-SCCP.log', mode 'w+' at 0x2dffa50>'
..... [ Debug (MainProcess,Thread-39,close,L160) ] [2013-09-05 04:23:27][731] P225-SCCP: Closed? True
[2013-09-05 04:23:27][732] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P225-SCCP elapsed_time=60.97 skew=63289124.45 secs
..... [ Debug (MainProcess,Thread-32,determineOffset,L749) ] [2013-09-05 04:23:27][733] P248-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-32,close,L122) ] [2013-09-05 04:23:29][734] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P248-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-32,close,L158) ] [2013-09-05 04:23:29][735] P248-PTRO: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P248-PTRO.log', mode 'w+' at 0x2dffae0>'
..... [ Debug (MainProcess,Thread-41,determineOffset,L749) ] [2013-09-05 04:23:29][736] BRIB-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-41,close,L122) ] [2013-09-05 04:23:29][737] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- BRIB-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-32,close,L160) ] [2013-09-05 04:23:29][738] P248-PTRO: Closed? True
..... [ Debug (MainProcess,Thread-41,close,L158) ] [2013-09-05 04:23:29][739] BRIB-ROCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/BRIB-ROCP.log', mode 'w+' at 0x2dffdb0>'
[2013-09-05 04:23:29][740] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P248-PTRO elapsed_time=62.57 skew=63289115.89 secs
..... [ Debug (MainProcess,Thread-41,close,L160) ] [2013-09-05 04:23:29][741] BRIB-ROCP: Closed? True
[2013-09-05 04:23:29][742] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=BRIB-ROCP elapsed_time=60.45 skew=63289126.02 secs
..... [ Debug (MainProcess,Thread-42,determineOffset,L749) ] [2013-09-05 04:23:27][743] P225-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-42,close,L122) ] [2013-09-05 04:23:30][744] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P225-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-42,close,L158) ] [2013-09-05 04:23:30][745] P225-ROCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P225-ROCP.log', mode 'w+' at 0x2dffd20>'
..... [ Debug (MainProcess,Thread-42,close,L160) ] [2013-09-05 04:23:30][746] P225-ROCP: Closed? True
[2013-09-05 04:23:30][747] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P225-ROCP elapsed_time=60.30 skew=63289126.21 secs
..... [ Debug (MainProcess,Thread-43,determineOffset,L749) ] [2013-09-05 04:23:29][748] P224-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-43,close,L122) ] [2013-09-05 04:23:30][749] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P224-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-43,close,L158) ] [2013-09-05 04:23:30][750] P224-ROCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P224-ROCP.log', mode 'w+' at 0x2dffc90>'
..... [ Debug (MainProcess,Thread-43,close,L160) ] [2013-09-05 04:23:30][751] P224-ROCP: Closed? True
[2013-09-05 04:23:30][752] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P224-ROCP elapsed_time=60.18 skew=63289126.45 secs
..... [ Debug (MainProcess,Thread-40,determineOffset,L749) ] [2013-09-05 04:23:25][753] P223-SCCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-40,close,L122) ] [2013-09-05 04:23:25][754] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P223-SCCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-40,close,L158) ] [2013-09-05 04:23:25][755] P223-SCCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P223-SCCP.log', mode 'w+' at 0x2dffc00>'
..... [ Debug (MainProcess,Thread-40,close,L160) ] [2013-09-05 04:23:25][756] P223-SCCP: Closed? True
[2013-09-05 04:23:25][757] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P223-SCCP elapsed_time=61.49 skew=63289125.69 secs
..... [ Debug (MainProcess,Thread-33,determineOffset,L749) ] [2013-09-05 04:23:32][758] P256-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-33,close,L122) ] [2013-09-05 04:23:32][759] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P256-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-44,determineOffset,L749) ] [2013-09-05 04:23:32][760] P223-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-33,close,L158) ] [2013-09-05 04:23:32][761] P256-PTRO: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P256-PTRO.log', mode 'w+' at 0x2dff030>'
..... [ Debug (MainProcess,Thread-44,close,L122) ] [2013-09-05 04:23:33][762] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P223-ROCP: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-33,close,L160) ] [2013-09-05 04:23:34][763] P256-PTRO: Closed? True
..... [ Debug (MainProcess,Thread-44,close,L158) ] [2013-09-05 04:23:34][764] P223-ROCP: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P223-ROCP.log', mode 'w+' at 0x2dffed0>'
[2013-09-05 04:23:29][765] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P256-PTRO elapsed_time=63.49 skew=63289110.13 secs
..... [ Debug (MainProcess,Thread-44,close,L160) ] [2013-09-05 04:23:34][766] P223-ROCP: Closed? True
[2013-09-05 04:23:34][767] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P223-ROCP elapsed_time=60.98 skew=63289126.68 secs
..... [ Debug (MainProcess,Thread-31,determineOffset,L749) ] [2013-09-05 04:23:34][768] P268-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-31,close,L122) ] [2013-09-05 04:23:34][769] /home/glarms/src/dev-g-larms/OffsetWriter.pyc -- P268-PTRO: initiate closing of offset_logger
..... [ Debug (MainProcess,Thread-31,close,L158) ] [2013-09-05 04:23:40][770] P268-PTRO: Closing `<open file '/home/glarms/src/glarms/testcases/Hayward_Grapenthin_etal_JGR_2014/offset_logs/P268-PTRO.log', mode 'w+' at 0x2a20300>'
..... [ Debug (MainProcess,Thread-31,close,L160) ] [2013-09-05 04:23:40][771] P268-PTRO: Closed? True
[2013-09-05 04:23:40][772] determineOffset: STATS (for RT): event=Hayward_Grapenthin_etal_JGR_2014 baseline=P268-PTRO elapsed_time=64.94 skew=63289108.72 secs
..... [ Debug (MainProcess,P225-P229,getRecords,L403) ] [2013-09-05 04:24:15][773] P225-P229: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:15][774] P225-P229: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:15][775] P225-P229 is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:15][776] Removing listener for P225-P229 ...
[2013-09-05 04:24:15][777] P225-P229 died
[2013-09-05 04:24:15][778] P225-P229 died
..... [ Debug (MainProcess,BRIB-ROCP,getRecords,L403) ] [2013-09-05 04:24:16][779] BRIB-ROCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:16][780] BRIB-ROCP: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:16][781] BRIB-ROCP is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:16][782] Removing listener for BRIB-ROCP ...
[2013-09-05 04:24:16][783] BRIB-ROCP died
[2013-09-05 04:24:16][784] BRIB-ROCP died
..... [ Debug (MainProcess,P222-SCCP,getRecords,L403) ] [2013-09-05 04:24:16][785] P222-SCCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
..... [ Debug (MainProcess,P224-ROCP,getRecords,L403) ] [2013-09-05 04:24:15][786] P224-ROCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:13][787] P222-SCCP: Stop time reached. Tapering out ...
[2013-09-05 04:24:13][788] P224-ROCP: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:14][789] P222-SCCP is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:14][790] Removing listener for P222-SCCP ...
[2013-09-05 04:24:14][791] P222-SCCP died
[2013-09-05 04:24:14][792] P222-SCCP died
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:15][793] P224-ROCP is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:15][794] Removing listener for P224-ROCP ...
[2013-09-05 04:24:15][795] P224-ROCP died
[2013-09-05 04:24:15][796] P224-ROCP died
..... [ Debug (MainProcess,ROCP-P229,getRecords,L403) ] [2013-09-05 04:24:16][797] ROCP-P229: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:16][798] ROCP-P229: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:16][799] ROCP-P229 is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:16][800] Removing listener for ROCP-P229 ...
[2013-09-05 04:24:16][801] ROCP-P229 died
[2013-09-05 04:24:16][802] ROCP-P229 died
..... [ Debug (MainProcess,P248-PTRO,getRecords,L403) ] [2013-09-05 04:24:16][803] P248-PTRO: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:16][804] P248-PTRO: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,P256-PTRO,getRecords,L403) ] [2013-09-05 04:24:11][805] P256-PTRO: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:11][806] P248-PTRO is finished ...
[2013-09-05 04:24:11][807] P256-PTRO: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:11][808] Removing listener for P248-PTRO ...
[2013-09-05 04:24:11][809] P248-PTRO died
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:11][810] P256-PTRO is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:11][811] Removing listener for P256-PTRO ...
[2013-09-05 04:24:11][812] P256-PTRO died
[2013-09-05 04:24:11][813] P256-PTRO died
[2013-09-05 04:24:11][814] P248-PTRO died
..... [ Debug (MainProcess,P225-ROCP,getRecords,L403) ] [2013-09-05 04:24:12][815] P225-ROCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:12][816] P225-ROCP: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:12][817] P225-ROCP is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:12][818] Removing listener for P225-ROCP ...
[2013-09-05 04:24:12][819] P225-ROCP died
[2013-09-05 04:24:12][820] P225-ROCP died
..... [ Debug (MainProcess,P262-PTRO,getRecords,L403) ] [2013-09-05 04:24:12][821] P262-PTRO: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:16][822] P262-PTRO: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:16][823] P262-PTRO is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:16][824] Removing listener for P262-PTRO ...
[2013-09-05 04:24:13][825] P262-PTRO died
[2013-09-05 04:24:13][826] P262-PTRO died
..... [ Debug (MainProcess,SCCP-P229,getRecords,L403) ] [2013-09-05 04:24:13][827] SCCP-P229: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:13][828] SCCP-P229: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:13][829] SCCP-P229 is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:13][830] Removing listener for SCCP-P229 ...
[2013-09-05 04:24:13][831] SCCP-P229 died
[2013-09-05 04:24:13][832] SCCP-P229 died
..... [ Debug (MainProcess,P225-SCCP,getRecords,L403) ] [2013-09-05 04:24:14][833] P225-SCCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:14][834] P225-SCCP: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,P178-P222,getRecords,L403) ] [2013-09-05 04:24:14][835] P178-P222: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:14][836] P225-SCCP is finished ...
[2013-09-05 04:24:14][837] P178-P222: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:14][838] Removing listener for P225-SCCP ...
[2013-09-05 04:24:14][839] P225-SCCP died
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:14][840] P178-P222 is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:14][841] Removing listener for P178-P222 ...
[2013-09-05 04:24:14][842] P178-P222 died
[2013-09-05 04:24:14][843] P178-P222 died
[2013-09-05 04:24:14][844] P225-SCCP died
..... [ Debug (MainProcess,P268-PTRO,getRecords,L403) ] [2013-09-05 04:24:16][845] P268-PTRO: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:16][846] P268-PTRO: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:16][847] P268-PTRO is finished ...
..... [ Debug (MainProcess,P223-ROCP,getRecords,L403) ] [2013-09-05 04:24:16][848] P223-ROCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:16][849] Removing listener for P268-PTRO ...
[2013-09-05 04:24:16][850] P223-ROCP: Stop time reached. Tapering out ...
[2013-09-05 04:24:16][851] P268-PTRO died
[2013-09-05 04:24:16][852] P268-PTRO died
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:16][853] P223-ROCP is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:16][854] Removing listener for P223-ROCP ...
[2013-09-05 04:24:16][855] P223-ROCP died
[2013-09-05 04:24:16][856] P223-ROCP died
..... [ Debug (MainProcess,P223-SCCP,getRecords,L403) ] [2013-09-05 04:24:16][857] P223-SCCP: /home/glarms/src/dev-g-larms/GPSReader_trackRT_ASCII.pyc stopTime=2013-09-05T04:24:16.000000Z
[2013-09-05 04:24:16][858] P223-SCCP: Stop time reached. Tapering out ...
..... [ Debug (MainProcess,MainThread,<module>,L309) ] [2013-09-05 04:24:16][859] P223-SCCP is finished ...
..... [ Debug (MainProcess,MainThread,<module>,L310) ] [2013-09-05 04:24:16][860] Removing listener for P223-SCCP ...
[2013-09-05 04:24:16][861] P223-SCCP died
[2013-09-05 04:24:16][862] Killing EEWReceiver
[2013-09-05 04:24:16][863] Cleaning up scratch files ...
[2013-09-05 04:24:16][864] Runtime: 0:01:35.124240